Limit Analysis of Soil Slopes Subjected to Pore-Water Pressures
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 125, Issue 1
Abstract
The limit-equilibrium method is commonly used for slope stability analysis. However, it is well known that the solution obtained from the limit-equilibrium method is not rigorous, because neither static nor kinematic admissibility conditions are satisfied. Limit analysis takes advantage of the lower- and upper-bound theorems of plasticity to provide relatively simple but rigorous bounds on the true solution. In this paper, three-noded linear triangular finite elements are used to construct both statically admissible stress fields for lower-bound analysis and kinematically admissible velocity fields for upper-bound analysis. By assuming linear variation of nodal and elemental variables, the determination of the best lower- and upper-bound solution may be set up as a linear programming problem with constraints based on the satisfaction of static and kinematic admissibility. The effects of pore-water pressure are considered and incorporated into the finite-element formulations so that effective stress analysis of saturated slopes may be done. Results obtained from limit analysis of simple slopes with different ground-water patterns are compared with those obtained from the limit-equilibrium method.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bishop, A. W. ( 1955). “The use of the slip circle in the stability analysis of slopes.” Géotechnique, Paris, 5(1), 7–17.
2.
Chen, W. F. (1970). “Discussion of `Circular and logarithmic spiral slip surfaces,' by E. Spencer.”J. Soil Mech. and Found. Div., ASCE, 96(1), 324–326.
3.
Chen, W. F. ( 1975). Limit analysis and soil plasticity . Elsevier Science, Amsterdam.
4.
Davis, E. H. ( 1968). “Theories of plasticity and failure of soil masses.” Soil mechanics: Selected topics, I. K. Lee, ed., Butterworth's, London, 341–380.
5.
de Borst, R., and Vermeer, P. A. ( 1984). “Possibilities and limitations of finite elements for limit analysis.” Géotechnique, Paris, 34, 199–210.
6.
Espinoza, R. D., Bourdeau, P. L., and Muhunthan, B. (1994). “Unified formulation for analysis of slopes with general slip surface.”J. Geotech. Engrg., ASCE, 120(7), 1185–1204.
7.
Fan, K., Fredlund, D. K., and Wilson, G. W. ( 1986). “An interslice force function for limit equilibrium slope stability analysis.” Can. Geotech. J., Ottawa, 23, 287–296.
8.
Finn, W. D. (1967). “Applications of limit plasticity in soil mechanics.”J. Soil Mech. and Found. Div., ASCE, 93(5), 101–120.
9.
Fredlund, D. G., and Krahn, J. ( 1977). “Comparison of slope stability methods of analysis.” Can. Geotech. J., Ottawa, 14(3), 429–439.
10.
Harr, M. E. ( 1962). Groundwater and seepage . Dover, New York.
11.
Houlsby, G. T. ( 1991). “How the dilatancy of soils affects their behavior.” Proc., 10th Eur. Conf. in Soil Mech. and Found. Engrg., 1189–1202.
12.
Janbu, N. ( 1954). “Stability analysis of slopes with dimensionless parameters.” Harvard Soil Mech. Ser., 46, Cambridge, Mass.
13.
Janbu, N. ( 1968). “Slope stability computations.” Soil Mech. and Found. Engrg. Rep., Technical University of Norway, Trondheim, Norway.
14.
Karal, K. (1977). “Energy method for soil stability analyses.”J. Geotech. Engrg. Div., ASCE, 103(5), 431–447.
15.
Kim, J., Salgado, R., Bandini, P., and Achilleos, E. ( 1998). PCSTABL5M: User's manual . School of Civ. Engrg., Purdue Univ., West Lafayette, Ind.
16.
Lubliner, J. ( 1990). Plasticity theory . Macmillan, Greenwich, Conn.
17.
Lysmer, J. (1970). “Limit analysis of plane problems in soil mechanics.”J. Soil Mech. and Found. Div., ASCE, 96(4), 1131–1334.
18.
Michalowski, R. L. ( 1994). “Limit analysis of slopes subjected to pore pressure.” Proc., Conf. on Comp. Methods and Advances in Geomech., Siriwardane and Zaman, eds., Balkema, Rotterdam, The Netherlands.
19.
Michalowski, R. L. ( 1995). “Slope stability analysis: A kinematical approach.” Géotechnique, Paris, 45(2), 283–293.
20.
Miller, T. W., and Hamilton, J. M. ( 1989). “A new analysis procedure to explain a slope failure at the Martin Lake Mine.” Géotechnique, Paris, 39(1), 107–123.
21.
Miller, T. W., and Hamilton, J. M. ( 1990). “A new analysis procedure to explain a slope failure at the Martin Lake Mine.” Discussion by R. L. Michalowski, Géotechnique, Paris, 40(1), 145–147.
22.
Morgenstern, N. R., and Price, V. E. ( 1965). “The analysis of the stability of generalized slip surfaces.” Géotechnique, Paris, 15, 79–93.
23.
Sloan, S. W. ( 1988a). “A steepest edge active set algorithm for solving sparse linear programming problems.” Int. J. Numer. Method in Engrg., 26, 2671–2685.
24.
Sloan, S. W. ( 1988b). “Lower bound limit analysis using finite elements and linear programming.” Int. J. Numer. and Analytical Methods in Geomech., 12, 61–77.
25.
Sloan, S. W., and Kleeman, P. W. ( 1995). “Upper bound limit analysis using discontinuous velocity fields.” Comp. Methods in Appl. Mech. of Engrg., 127, 293–314.
26.
Spencer, E. ( 1967). “A method of analysis of the stability of embankments assuming parallel inter-slice forces.” Géotechnique, Paris, 17(1), 11–26.
27.
Yu, H. S., Salgado, R., Sloan, S. W., and Kim, J. (1998). “Limit equilibrium versus limit analysis for slope stability.”J. Geotech. Engrg., ASCE, 124(1), 1–11.
28.
Zienkiewicz, O. C., Humpheson, C., and Lewis, R. W. ( 1975). “Associated and non-associated visco-plasticity in soil mechanics.” Géotechnique, Paris, 25, 671–689.
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 125 • Issue 1 • January 1999
Pages: 49 - 58
History
Received: Jun 3, 1997
Published online: Jan 1, 1999
Published in print: Jan 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.