Climatic Soil Freezing Modeled in Centrifuge
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 124, Issue 12
Abstract
Experimental evidence is produced using two soils that support the hypothesis that small-scale models frozen on a centrifuge for several hours can simulate correctly full-scale soil freezing response developing in the field over one or more winters. This is not the case in small 1g models. The conclusion is based on three observations: first, that model data produce self-consistent results from tests conducted at different scales; second, that model thin sections show general scaling of ice formation; and third, that heave developing in the field under broadly similar conditions shows broadly similar heave characteristics. A small series of tests to investigate effects on heave of various temperature regimes that might exist in the field also is included.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Andrew N. Schofield & Associates (1992). “Design options for control of the thermal environment in a centrifuge model test package.”Rep. No. 26-02-R-004, Appendix C, Andrew N. Schofield & Associates.
2.
Chamberlain, E. J. (1986). “Evaluation of selected frost susceptibility test methods.”U.S. Army CRREL Rep. No. 86-14, Cold Regions Research and Engineering Laboratory, Hanover, N.H.
3.
Chamberlain, E. J. (1987). “A freeze-thaw test to determine the frost susceptibility of soils.”CRREL Spec. Rep. No. 87-1, Cold Regions Research and Engineering Laboratory, Hanover, N.H.
4.
Guymon, G. L., Berg, R. L., and Hromadka, T. V. (1993). “Mathematical model of frost heave and thaw settlement in pavements.”CRREL Rep. No. 93-2, Cold Regions Research and Engineering Laboratory, Hanover, N.H.
5.
Jessberger, H. L. (1989). Opening address. “Ground freezing,” Vol. 2, R. H. Jones and T. T. Holden, eds., A. A. Balkema, Rotterdam, The Netherlands.
6.
Ketcham, S. A. (1991). “Centrifuge applications in cold regions research.”Large centrifuge: A critical army capability for the future, Part III, Miscellaneous Paper GL-91-12, R. H. Ledbetter, ed., U. S. Army Corps of Engineers Waterways Experiment Station, Vicksburg, Miss., 35—48.
7.
Ketcham, S. A., Black, P. B., and Pretto, R.(1997). “Frost heave loading of constrained footing by centrifuge modeling.”J. Geotech. Engrg., ASCE, 123(9), 874–880.
8.
Konrad, J.-M.(1988). “Influence of freezing mode on frost heave characteristics.”Cold Reg. Sci. and Technol., 15, 161–175.
9.
Konrad, J.-M.(1994). “Frost heave in soils: concepts and engineering.”16th Can. Geotech. Colloquium, Can. Geotech. J., 31(2), 223–245.
10.
Konrad, J.-M., and Morgenstern, N. R.(1980). “A mechanistic theory of ice lensing in soils.”Can. Geotech. J., Ottawa, Canada, 17(4), 473–486.
11.
Konrad, J.-M., and Seto, J. T. C.(1994). “Frost heave characteristics of undisturbed sensitive Champlain Sea clay.”Can. Geotech. J., Ottawa, Canada, 31(2), 285–298.
12.
Miller, E. E., and Miller, R. D.(1956). “Physical theory for capillary flow phenomena.”J. Appl. Phys., 27(4), 324–332.
13.
Miller, R. D. (1990). “Scaling of freezing phenomena in soils.”Scaling in soil physics: Principle and Applications, D. Hillel and D. E. Elrick, eds., Soil Science Society of America Special Publication No. 25, Madison, Wis., 1–11.
14.
Moo-Young, H. K., and Zimmie, T. F.(1996). “Effects of freezing and thawing on the hydraulic conductivity of paper mill sludges used as landfill covers.”Can. Geotech. J., Ottawa, Canada, 33(5), 783–792.
15.
Ovesen, N. K. (1979). “The use of physical models in design: the scaling law relationships.”Proc., 7th Eur. Conf. on Soil Mech. and Found. Engrg., Vol. 4, A. A. Balkema, Rotterdam, The Netherlands.
16.
Pokrovsky, G. I., and Fyodorov, I. S. (1969). Centrifuge model testing in the mining industry. Niedra Publishing House, Moscow, Russia.
17.
Sharratt, B. S.(1993). “Freeze-thaw and winter temperature of agricultural soils in interior Alaska.”Cold Regions Sci. and Technol., 21, 105–111.
18.
Shoop, S. A., and Bigl, S. R.(1997). “Moisture migration during freeze and thaw of unsaturated soils: Modeling and large scale experiments.”Cold Regions Sci. and Technol., 25(1), 33–45.
19.
Smith, C. C. (1991). “Thaw induced settlement of pipelines in centrifuge model tests,” PhD dissertation, University of Cambridge, Cambridge, U.K.
20.
Taylor, N. (ed.) (1995). Geotechnical centrifuge technology. Blackie, Glasgow, U.K.
21.
Yang, D. (1997). “Investigation of the scaling laws for centrifuge modeling of frost heave,” PhD dissertation, University of Maryland, College Park, Md.
22.
Yang, D., and Goodings, D. J.(1998). “Predicting frost heave using FROST model with centrifuge models.”J. Cold Reg. Engrg., ASCE, 12(2), 64–83.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Dec 1, 1998
Published in print: Dec 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.