Lateral Pressure on Sheet Pile Walls due to Strip Load
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 124, Issue 1
Abstract
Model sheet pile wall tests were conducted in sand to investigate the effect of surcharge strip loads on wall behavior. Bending-moment graphs are presented for several values of strip load intensity and distance from the wall. Measured bending moments are compared to predictions made using lateral earth pressures for strip surface loading, defined by various methods. The Coulomb analysis and the simple “45° load distribution” approach provided the best predictions, while bending moments determined using elasticity theory were significantly overestimated. Finite-element analyses demonstrated the importance of lateral wall yielding for lateral surcharge pressures and bending moments.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Beton kalender. (1983). Verlag von Wilhelm Ernst and Sohn, Munich, Germany.
2.
Blum, H. (1951). Beitrag zur berechnung von bohlwerken unter beruchsichtigung der wandverformung. Verlag von Wilhelm Ernst and Sohn, Munich, Germany.
3.
Cernica, J. N. (1995). Geotechnical engineering: foundation design. John Wiley & Sons, Inc., New York, N.Y.
4.
“Foundations and earth structures. Design manual.” (1982). NAVFAC DM-7.2, Dept. of the Navy, Alexandria, Va.
5.
Jarquio, R.(1981). “Total lateral surcharge pressure due to strip load.”J. Geotech. Engrg. Div., ASCE, 107(10), 1424–1428.
6.
Misra, B.(1981). “Lateral pressures on retaining walls due to loads on surfaces of granular buckfills.”Soils and Found., Tokyo, Japan, 20(2), 33–44.
7.
Motta, E.(1994). “Generalized Coulomb active-earth pressure for distanced surcharge.”J. Geotech. Engrg., ASCE, 120(6), 1072–1079.
8.
Steenfelt, J. S., and Hansen, B.(1983). “Discussion of `Total lateral surcharge pressure due to strip load,' by R. Jarquio.”J. Geotech. Engrg., ASCE, 109(2), 271–273.
9.
Steenfelt, J. S., and Hansen, B.(1984). “Sheet pile design earth pressure for strip load.”J. Geotech. Engrg., ASCE, 110(7), 976–986.
10.
Teng, W. C. (1962). Foundation design. Prentice-Hall, Inc., Englewood Cliffs, N.J.
11.
Vermeer, P. A. (1996). PLAXIS—finite element code for soil and rock plasticity. A. A. Balkema, Rotterdam, The Netherlands.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Jan 1, 1998
Published in print: Jan 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.