Settlement of Reinforced Sand in Foundations
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 123, Issue 9
Abstract
The technique of reinforcing soil for foundation improvement is well established. This paper addresses the aspect of settlement of reinforced sand foundations, where the major part of the existing work deals with the aspect of bearing capacity. A detailed analysis is made paying individual attention to soil, reinforcement, and the interface between the two. A three-dimensional, nonlinear finite-element analysis is presented that uses a three-dimensional, nonlinear soil-reinforcement interface friction element, along with other three-dimensional elements to model the system. The results of the analysis are compared with those from tests conducted in the laboratory and are found to be in good agreement. The studies lead to a better understanding of the behavior of the system at different stages of loading.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Akinmusura, J. O., and Akinbolade, J. A.(1981). “Stability of loaded footings on reinforced soil.”J. Geotech. Engrg., ASCE, 107(6), 819–827.
2.
Ayyar, T. S. R., Joseph, J., and Beena, K. S. (1988). “Bearing capacity of sand reinforced with coir rope.”Proc., 1st Indian Geotextile Conf. on Reinforced Soil and Geotextiles, A.11–16.
3.
Beena, K. S. (1986). “Bearing capacity of sand reinforced with coir rope,” M.Tech. thesis, Univ. of Kerala, India.
4.
Beena, K. S. (1994). “Studies on the settlement of reinforced sand in foundations,” PhD thesis, Indian Inst. of Technol., Madras, India.
5.
Beer, G.(1985). “An isoparametric joint/interface element for finite element analysis.”Int. J. Numer. Methods in Engrg., 21(4), 585–600.
6.
Binquet, J., and Lee, K. L.(1975). “Bearing capacity tests on reinforced earth soils.”J. Geotech. Engrg., ASCE, 101(12), 1241–1255.
7.
Desai, C. S.(1974). “Numerical design-analysis of piles in sand.”J. Geotech. Engrg., ASCE, 100(6), 613–635.
8.
Desai, C. S., and Abel, J. F. (1972). Introduction to the finite element method. Van Nostrand Reinhold, New York, N.Y.
9.
Duncan, J. M., and Chang, C. Y.(1970). “Nonlinear analysis of stresses and strains in soils.”J. Soil Mech. and Found. Div., ASCE, 96(5), 1629–1653.
10.
Fragaszy, R. J., and Lawton, E.(1984). “Bearing capacity of reinforced sand subgrades.”J. Geotech. Engrg., ASCE, 110(10), 1500–1511.
11.
Gens, A., Carol, I., and Alonso, E. E.(1989). “An interface element formulation for the analysis of soil-reinforcement interaction.”Comp. and Geotech., 7, 133–151.
12.
Ghaboussi, J., Wilson, E. L., and Isenberg, J.(1973). “Finite element for rock joints and interfaces.”J. Soil Mech. and Found. Div., ASCE, 99(10), 833–848.
13.
Goodman, R. E., and St. John, C. (1977). “Finite element analysis for discontinuous rocks.”Numerical methods in geotechnical engineering, C. S. Desai and J. T. Christian, eds., McGraw-Hill Inc., New York, N.Y., 148–175.
14.
Goodman, R. E., Taylor, R. L., and Brekke, T. L.(1968). “A model for the mechanics of jointed rock.”J. Soil Mech. and Found. Div., ASCE, 94(3), 637–659.
15.
Kinney, T. (1982). “Small scale load tests on a soil-geotextile-aggregate system.”Proc., 2nd Int. Conf. on Geotextiles, 405–409.
16.
Kondner, R. L., and Zelasko, J. S.(1963). “A hyperbolic stress-strain formulation for sands.”Proc., 2nd Pan Am. Conf. on Soil Mech. and Found. Engrg., 1, 289–324.
17.
Kurian, N. P. (1992). Design of foundation systems: principles and practices. Addison-Wesley Publishing Co., Singapore, 64–67.
18.
Lee, K. L. (1978). “Mechanism, analysis and design of reinforced earth, state-of-the art report.”Proc., Symp. on Earth Reinforcements, ASCE, New York, N.Y., 62–76.
19.
Muqtadir, A., and Desai, C. S.(1986). “Three-dimensional analysis of a pile-group foundation.”Int. J. Numer. and Analytical Methods in Geomech., 10, 41–58.
20.
Nagoa, A., Kitamura, T., and Mizutani, J. (1988). “Field experiment on reinforced earth and its evaluation using FEM analysis.”Proc., Int. Geotech. Symp. on Theory and Practice of Earth Reinforcement, 329–334.
21.
Romstad, K. M., Herrmann, L. R., and Shen, C. K.(1976). “Integrated study of reinforced earth. I: Theoretical formulation.”J. Geotech. Engrg. Div., ASCE, 102(5), 457–471.
22.
Singh, H. R. (1988). “Bearing capacity of reinforced soil beds,” PhD thesis, Indian Inst. of Sci., Bangalore, India.
23.
Vidal, H. (1969). “The principle of reinforced earth.”Hwy. Res. Rec. 282, Washington, D.C.
24.
Zienkiewicz, O. C. (1979). The finite element method. McGraw-Hill Inc., London, U.K.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Sep 1, 1997
Published in print: Sep 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.