Electrokinetic Injection of Ammonium and Sulfate Ions into Sand and Kaolinite Beds
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 123, Issue 3
Abstract
The efficiency of electrokinetic injection of a cation (ammonium) from the anode and an anion (sulfate) from the cathode into a fine-grained sand bed and a kaolinite bed is investigated. Electrodes are placed in chambers across 80 cm of soil beds in a flume. The electrical conductivity of the kaolinite bed was 124.1 ± 6.6 μS/cm approximately an order of magnitude higher than the fine sand bed while the hydraulic conductivity of the same was 2 × 10−7 cm/s about three orders of magnitude lower than the fine-grained sand bed. The electrical gradients of 1 V/cm or less constituted the predominant driving force for transport under constant current densities of 15 μA/cm2 and 123 μA/cm2 in the sand and kaolinite beds, respectively. An electrolyte conditioning scheme where the co-ions (hydroxide ion in the ammonium hydroxide used at the anode and the hydronium ion in the sulfuric acid used at the cathode) depolarized the electrode reactions maintained the pH value across the beds between 6.5 and 7.4. This novel conditioning scheme prevented formation and introduction of species formed by the electrode reactions and avoided unnecessary increase in the electrical conductivity in the electrolytes. Transport rates on the order of 8–20 cm/d were achieved for sulfate and ammonium ions in both the fine-grained sand bed and the kaolinite bed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Acar, Y. B., and Alshawabkeh, A. N.(1993). “Principles of electrokinetic remediation.”Envir. Sci. and Technol., 27(13), 2638–2647.
2.
Acar, Y. B., and Alshawabkeh, A.(1996). “Electrokinetic remediation. I: pilot-scale tests with lead spiked kaolinite.”J. Geotech. Engrg., ASCE, 122(3), 173–185.
3.
Acar, Y. B., and Zappi, M.(1995). “Infrastructural needs in waste containment and environmental restoration.”J. Infrastruct. Syst., ASCE, 1(2), 82–91.
4.
Acar, Y. B., Li, H., and Gale, R. J. (1992). “Phenol removal from kaolinite by electrokinetics.”J. Geotech. Engrg., ASCE, 118(119), 1837–1852.
5.
Acar, Y. B., Hamed, J., Alshawabkeh, A., and Gale, R.(1994). “Cd(II) removal from saturated kaolinite by application of electrical current.”Geotechnique, London, England, 44(3), 239–254.
6.
Acar, Y. B., Gale, R., Alshawabkeh, A., Marks, R., Puppala, S., Bricka, M., and and Parker, R.(1995a). “Electrokinetic remediation: basics and technology status.”J. Haz. Mat., Amsterdam, The Netherlands, 40(2), 117–137.
7.
Acar, Y. B., Taha, R., and Constant, D.(1995b). “The PPI Superfund site: remedial measures and alternatives.”Geotech. Spec. Publ., 2(46), 1684–1699.
8.
Alshawabkeh, A. N., and Acar, Y. B.(1996). “Electrokinetic remediation. II: Theoretical model.”J. Geotech. Engrg., ASCE, 122(3), 185–196.
9.
Altech Associates. (1990). “Wescan Model 360 Ammonia Analyzer.”Instruction manual. Deerfield, Ill.
10.
Carlson, R. M.(1978). “Automated separation and conductimetric determination of ammonia and dissolved carbon dioxide.”Anal. Chem., 50, 1528.
11.
Cookson, J. T. (1995). Bioremediation engineering: design and application. McGraw-Hill Book Co., Inc., New York, N.Y.
12.
Electrokinetics Inc. (EK). “Insitu bioremediation by electrokinetic injection.”STTR-Phase I Rep. to the Dept. of Energy, Electrokinetics Inc., Baton Rouge, La.
13.
Eykholt, G. R., and Daniel, D.(1994). “Impact of system chemistry on electroosmosis in contaminated soil.”J. Geotech. Engrg., ASCE, 120(5), 797–815.
14.
Gray, D. H.(1970). “Electrochemical hardening of clay soils.”Geotechnique, London, England, 20(1), 81–93.
15.
Gray and Schlocker.(1969). “Electrochemical alteration of clays.”Clays and Clay Minerals, 17(5), 309–322.
16.
Hamed, J., Acar, Y. B., and Gale, R. J.(1991). “Pb(II) removal from kaolinite by electrokinetics.”J. of Geotech. Engrg., ASCE, 117(2), 241–271.
17.
Holmes, W. J.(1963). “Electroosmosis and the civil engineer.”Civ. Engrg. Public Works Rev., 58(682), 624–626.
18.
Hunter, R. J. (1981). Zeta potential in colloid science. Academic Press, Inc., San Diego, Calif.
19.
Jacobs, R. A., Sengun, M. Z., Hicks, R. E., and Probstein, R. F. (1994). “Model and experiments on soil remediation by electric fields.”J. Envir. Sci. and Health, A29(9), 1933–1955.
20.
Lageman, R. (1993). “Electro-reclamation.”Envir. Sci. and Technol., 27(13).
21.
Lide, D., and Frederikse, H. (1993). CRC handbook of chemistry and physics, 74th Ed., CRC Press, Inc., Boca Raton, Fla.
22.
Madshus, P. A., and Janbu, N. (1984). “Improvement of quick clay by electrolysis.”Proc., Scandinavian Geotech. Meeting, Sweden, Bull. 17, Dept. of Geotech. Engrg., The Norwegian Inst. of Technol.
23.
Mitchell, J. K. (1993). Fundamentals of soil behavior. John Wiley & Sons, Inc., New York, N.Y.
24.
National Research Council (NRC). (1995). In-situ bioremediation: when does it work? National Academy Press, Washington, D.C.
25.
Pamukcu, S., and Wittle, J. K.(1992). “Electrokinetic removal of selected heavy metals from soil.”Envir. Progress, 11(3), 241–250.
26.
Probstein, R. F., and Hicks, R. E.(1993). “Removal of contaminants from soils by electric fields.”Sci., 260, 498–504.
27.
Riley, R. G., Zachara, J. M., and Webber, F. J. (1992). “Chemical contaminants on DOE lands and selection of contaminant mixtures for subsurface science research.” U.S. Dept. of Energy, Washington, D.C.
28.
Rødsand, T., Acar, Y. B., and Breedveld, G.(1995). “Electrokinetic extraction of lead from spiked Norwegian marine clay.”Geotech. Soc. Publ., ASCE, 2(46), 1518–1534.
29.
Runnells, D. D., and Wahli, C.(1993). “In-situ electromigration as a method for removing sulfate, metals and other contaminants from ground water.”Ground Water Monitoring Rev., 11(3), 121.
30.
Segal, B., and Bruell, C.(1992). “Electroosmotic contaminant removal processes.”J. Envir. Engrg., 118(1), 84–100.
31.
Senneset, K., and Acar, Y. B. (1995). “A glimpse at electrokinetic soil improvement.”Proc., Bengt B. Broms Symp. in Geotech. Engrg., NTU-PWD Geotech. Res. Ctr., Nanyang Technol. Univ., Singapore, 363–381.
32.
Shapiro, A. P., and Probstein, R. F.(1993). “Removal of contaminants from saturated clay by electroosmosis.”Envir. Sci. and Technol., 27(2), 283–291.
33.
Suflita, J. M., and Sewell, G. W. (1991). “Anareobic biotransformation of contaminants in the subsurface.”OK EPA/600/M-90/024, U.S. Envir. Protection Agency, Robert S. Kerr Envir. Lab., Ada, Okla.
34.
Sutton and Alexander. (1987). “Soil improvement—a ten year update.”Geotech. Spec. Publ., ASCE, J. Welsh, ed., (12).
35.
Ugaz, A., Puppala, S., Gale, R. J., and Acar, Y. B. (1994). “Electrokinetic soil processing: complicating features of electrokinetic remediation of soils and slurries: saturation effects and the role of the cathode electrolysis.”Chemical engineering communications, Vol. 129, Gordon & Breach Science Publishers, New York, N.Y., 183–200.
36.
U.S. Environmental Protection Agency (USEPA). (1992). “Inductively coupled plasma-atomic emission spectroscopy.”Test Methods for Evaluating Solid Waste (SW-846): Method 9056, Ofc. of Solid Waste and Emergency Response, Washington, D.C.
37.
U.S. Environmental Protection Agency (USEPA). (1994). “Determination of inorganic anions by ion chromatograph.”Test Methods for Evaluating Solid Waste (SW-846): Method 9056, Ofc. of Solid Waste and Emergency Response, Washington, D.C.
38.
Wieberen, P. (1992). “A process for electroreclamation of soil material, an electric current system for application of the process, and an electrode housing for use in the electric current system.”Eur. Patent Specification, Publication Number 0312174 B1.
39.
Yeung, A. T. (1994). “Electro-kinetic flow processes in porous media and their applications.”Advances in porous media. Elsevier Science Publishers, BV (North-Holland), Amsterdam, The Netherlands, Vol. 2, 309–395.
40.
Zappi, M. et al. (1993). “Technical approach for in situ biological treatment research: bench-scale experiments.”Tech. Rep. No. IRRP-933, U.S. Army Corps of Engineers, Wtrwy. Experiment Station, Vicksburg, Miss.
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 123 • Issue 3 • March 1997
Pages: 239 - 249
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Mar 1, 1997
Published in print: Mar 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.