Deep-Footing and Wide-Slab Effects in Reinforced Sandy Ground
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 123, Issue 1
Abstract
Quantitative evaluations are performed on two failure mechanisms, namely, deep-footing and wide-slab mechanisms, that dominate the bearing-capacity characteristics of sandy ground reinforced with horizontal reinforcing layers. The improvement contributed by reinforcement, creating a quasi-rigid, wide earth slab immediately under the footing to the bearing capacity is analyzed. The maximization of the bearing-capacity increase of a footing is a matter of optimizing the depth and width of the quasi-rigid earth slab. The results of a total of 105 model tests, including reduced-scale model tests and some centrifuge tests under 15 g, are analyzed using calibrated internal friction angles of sand and an experimentally verified failure mechanism in reinforced sandy ground, namely, the deep-footing mechanism. Back-calculations are performed on the load-spreading angle α, which represents the total effect of the deep footing and wide slab for all the tests. Both linear and nonlinear multiple-variable data regressions are performed to find the relationships between the effect of reinforcing and the factors that control the scheme of reinforcement. The analytical procedure and equation derived in the present study substantiate the prediction of the ultimate bearing capacity of sandy ground reinforced with horizontal reinforcement.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Akinmusuru, J. O., and Akinbolade, J. A.(1981). “Stability of loaded footings on reinforced soil.”J. Geotech. Engrg. Div., ASCE, 107(6), 819–827.
2.
Binquet, J., and Lee, K. L.(1975a). “Bearing capacity tests on reinforced earth slabs.”J. Geotech. Engrg. Div., ASCE, 101(12), 1241–1255.
3.
Binquet, J., and Lee, K. L.(1975b). “Bearing capacity analysis of reinforced earth slabs.”J. Geotech. Engrg. Div., ASCE, 101(12), 1257–1276.
4.
Fragaszy, R., and Lawton, E.(1984). “Bearing capacity of reinforced sand subgrades.”J. Geotech. Engrg., ASCE, 110(10), 1500–1511.
5.
Guido, V. A., Chang, D. K., and Sweeney, M. A.(1986). “Comparison of geogrid and geotextile reinforced earth slabs.”Can. Geotech. J., 23, 435–440.
6.
Huang, C. C., and Tatsuoka, F. (1988). “Prediction of bearing capacity in level sandy ground reinforced with strip reinforcement.”Proc., Int. Geotech. Symp. Theory and Pract. of Earth Reinforcement, Balkema, Fukuoka, Kyushu, Japan, 191–196.
7.
Huang, C. C., and Tatsuoka, F.(1990). “Bearing capacity of reinforced horizontal sandy ground.”Geotextiles and Geomembranes, 9, 51–82.
8.
Khing, K. H., Das, B. M., Puri, V. K., Cook, E. E., and Yen, S. C. (1992). “Bearing capacity of two closely-spaced strip foundations on geogrid-reinforced sand.”Proc., Earth Reinforcement Pract., Balkema, Fukuoka, Kyushu, Japan, 619–624.
9.
Pradhan, T. B. S., Tatsuoka, F., and Horii, N.(1988). “Strength and deformation characteristics of sand in torsional simple shear.”Soils and Found., 28(3), 131–148.
10.
Schlosser, F., Jacobsen, H. M., and Juran, I. (1983). “Soil reinforcement.”General Rep., 8th Eur. Conf. on Soil Mech. and Found. Engrg., Balkema, Helsinki, 83–103.
11.
Takemura, J., Okamura, M., Suesmasa, N., and Kimura, T. (1992). “Bearing capacity and deformations of sand reinforced with geogrids.”Proc., Earth Reinforcement Pract., Balkema, Fukuoka, Kyushu, Japan, 695–700.
12.
Tatsuoka, F., Okahara, M., Tanaka, T., Tani, K., Morimoto, T., and Siddiquee, M. S. A. (1991). “Progressive failure and particle size effect in bearing capacity of a footing on sand.”Proc., Geotech. Engrg. Congr., ASCE, New York, N.Y., 788–802.
13.
Terzaghi, K. (1943). Theoretical soil mechanics. John Wiley and Sons, Inc., New York, N.Y.
14.
Vesic, A. S.(1973). “Analysis of ultimate loads of shallow foundations.”J. Soil Mech. and Found. Div., ASCE, 99(1), 45–73.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Jan 1, 1997
Published in print: Jan 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.