Stiffness and Strength of Metal Bridge Deck Forms
Publication: Journal of Bridge Engineering
Volume 12, Issue 4
Abstract
Light gauge metal sheeting is often utilized in the building and bridge industries for concrete formwork. Although the in-plane stiffness and strength of the metal forms are commonly relied upon for stability bracing in buildings, the forms are generally not considered for bracing in steel bridge construction. The primary difference between the forming systems in the two industries is the method of connection between the forms and girders. In bridge construction, an eccentric support angle is incorporated into the connection details to achieve a uniform slab thickness along the girder length. While the eccentric connection is a benefit for slab construction, the flexible connection limits the amount of bracing provided by the forms. This paper presents results from the first phase of a research study investigating the bracing behavior of metal bridge deck forms. Shear diaphragm tests were conducted to determine the shear stiffness and strength of bridge deck forms, and modified connection details were developed that substantially improve the bracing behavior of the forms. The measured stiffness and strength of diaphragms with the modified connection often met or exceeded the values of diaphragms with conventional noneccentric connections. The experimental results for the diaphragms with the modified connection details dramatically improve the potential for bracing of steel bridge girders by metal deck forms.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (2002). Standard specifications for highway bridges, 17th Ed., Washington, D.C.
AASHTO. (2004). Load and resistance factor design specification (LRFD) bridge design specifications, 3rd Ed., Washington, D.C.
Currah, R. M. (1993). “Shear strength and shear stiffness of permanent steel bridge deck forms.” MS thesis, Univ. of Texas at Austin, Austin, Tex.
Davies, J. M., and Bryan, E. R. (1982). Manual of stressed skin diaphragm design, Wiley, New York.
Egilmez, O. O. (2005). “Lateral bracing of steel bridge girders by Permanent metal deck forms.” Ph.D. dissertation, Univ. of Houston, Houston.
Errera, S. J., and Apparao, T. V. S. R. (1976). “Design of I-shaped beams with diaphragm bracing.” J. Struct. Div., 102(4), 769–781.
Galambos, T. V., ed. (1998). Guide to stability design criteria for metal structures, 5th Ed., Wiley, New York.
Helwig, T. A. (1994). “Lateral bracing of bridge girders by metal deck forms.” Ph.D. dissertation, Univ. of Texas at Austin, Austin, Tex.
Helwig, T. A., and Frank, K. H. (1999). “Stiffness requirements for diaphragm bracing of beam.” J. Struct. Eng., 125(11), 1249–1256.
Luttrell, L. D. (1981). Steel Deck Institute diaphragm design manual, 1st Ed., St. Louis, Mo.
Luttrell, L. D. (2004). Steel Deck Institute diaphragm design manual, 3rd Ed.
Soderberg, E. (1994). “Strength and stiffness of stay-in-place metal deck form systems.” MS thesis, Univ. of Texas at Austin, Tex.
Texas Dept. of Transportation (TxDOT). (2004). Permanent metal deck form standards, Bridge Division.
Winter, G. (1958). “Lateral bracing of columns and beams.” J. Struct. Div., 84(2), 1–22.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Apr 13, 2006
Accepted: Jul 17, 2006
Published online: Jul 1, 2007
Published in print: Jul 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.