Research on Steel Shell of a Road Bridge Made of Corrugated Plates during Backfilling
This article is a reply.
VIEW THE ORIGINAL ARTICLEThis article has a reply.
VIEW THE REPLYPublication: Journal of Bridge Engineering
Volume 10, Issue 5
Abstract
This paper presents the results and conclusions of the research conducted on a backfilled shell structure made of Super Cor SC-56B corrugated steel plates of a road bridge located in Gimån, Sweden. The conclusions drawn from the tests can be helpful mostly for the assessment of the behavior of this type of steel–soil bridge structure under the load of backfilling. In consideration of an even more frequent application of this type of structure for small and middle-sized road and rail bridges, conclusions from the conducted research can be generalized to the whole class of such structural solutions.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Association of State Highway and Transportation Officials (AASHTO). (1996). “Standard specifications for highway bridges.” AASHTO, New York.
American Iron and Steel Institute (AISI). (1994). Handbook of steel drainage and highway construction products 5th Ed., AISI, Chicago.
Beben, D. (2002). “Research of road bridge made of steel corrugated plate super Cor type.” Proc., 4th Conf. on the PhD Students of Civil Engineering, Scientific Books of Silesia Technical University Building Series, Gliwice-Wisla, Poland, 65–74 (in Polish).
Beben, D. (2003). “Dynamic research of road bridge made of steel corrugated plate.” Proc., 4th Conf. on the PhD Students of Civil Engineering, Scientific Books of Silesia Technical University Building Series, Gliwice-Wisla, Poland, 79–86 (in Polish).
Beben, D., and Manko, Z. (2002a). “Application of steel structures made of corrugated plates to fast rebuilding of bridges in crisis situations.” Proc., 12th Int. Scientific Conf.: Military Engineering on Infrastructure Transportation and Building in Crises Situations, Warszawa-Rynia, Poland, 126–133 (in Polish).
Beben, D., and Manko, Z. (2002b). “Reliability of bridge structures made of corrugated steel plates situated on mountain rivers.” Proc., 3rd Scientific Conf. on Safety and Durability Water Plant, Kamien Slaski, Poland, 39–54 (in Polish).
Beben, D., and Manko, Z. (2002c). “Research on road bridge made of Super Cor corrugated steel plates.” Proc., 48th Scientific Conf. Civil Engineering Committee Polish Academy of Sciences and Scientific Committee PZITB Krynica 2002: Scientific-Research Civil Engineering Problems, Opole-Krynica, Poland, Vol. 4, 167–174 (in Polish).
Beben, D., and Manko, Z. (2003a). “Experimental research on road bridge of flexible structure made of Cor Type SC-54B corrugated steel plate Super under static load.” Proc., 2nd Scientific-Technical Symp.: Research and Diagnostic of Bridges, Opole, Poland, 69–120 (in Polish).
Beben, D., and Manko, Z. (2003b). “Research on road bridge made of Cor type SC-56B super corrugated steel plate under static load.” Proc., 1st Scientific-Technical Symp.: Diagnostic and Research of Bridges, Opole, Post Conference Papers, Opole-Wroclaw, Poland, 27–70 (in Polish).
Beben, D., and Manko, Z. (2003c). “Research on steel road bridge with corrugated plate multiplate type under static load.” Proc., 1st Scientific-Technical Symp.: Diagnostic and Research of Bridges, Opole, Post Conference Papers, Opole-Wroclaw, Poland, 71–96 (in Polish).
Beben, D., and Manko, Z. (2003d). “Static research on road bridge made of corrugated steel plate.” Quarterly of Road and Bridges Research Institute, Warszawa, Poland, 3, 17–42 (in Polish).
Beben, D., and Manko, Z. (2003e). “The first bridge in Scandinavia made of Super Cor corrugated steel plate.” Bezpieczne Drogi, Warszawa, Poland, 11(59), 18–22 (in Polish).
Beben, D., and Manko, Z. (2004). “Research on road bridge on flexible structure made of super Cor corrugated steel plates under static load in Gimån (Sweden).” Konstrukcje Stalowe, Warszawa, Poland, 2(67), 29–34 (in Polish).
Beben, D., Czyzewski, P., and Manko, Z. (2004). “Construction of the largest bridge in Europe made of Super Cor corrugated steel plate.” Inzynieria i Budownictwo, Warszawa, Poland, 4, 198–201 (in Polish).
Beben, D., Manko, Z., Janusz, L., and Vaslestad, J. (2003). “Research on steel shell of road bridge in Gimån in Sweden made of corrugated plate Super Cor type SC-54B during its backfilling.” Proc., 2nd Scientific-Technical Symp.: Research and Diagnostic of Bridges, Opole, Poland, 31–67 (in Polish).
Beben, D., Manko, Z., and Truch, J. (2002). “Reinforcement of arch bridge with the help of structure made of multiplate corrugated steel plate type.” Proc., 12th Seminar: Present Methods of Reinforcing and Rebuilding Bridges, Poznan-Kiekrz, Poland, 7–12 (in Polish).
Bednarek, B., Janusz, L., Mielnik, L., and Wysokowski, A. (2003). “Research on culvert of corrugated steel plate box section in the natural scale. Comparison analysis of stresses value in wall structure during backfilling and under statical load.” Proc., 2nd Scientific-Technical Symp.: Research and Diagnostic of Bridges, Opole, Poland, 23–29 (in Polish).
Madaj, A., Bednarek, B., Janusz, L., and Vaslestad, J. (2003). “Test after one-year’s service co-operation steel structure on corrugated plate use to reinforcement steel culvert.” Proc., 13th Seminar: Present Methods of Reinforced and Rebuilding Bridges, Poznan-Kiekrz, Poland, 173–181 (in Polish).
Madaj, A., Janusz, L., and Vaslestad, J. (2001). “Research on brick culvert reinforcing of steel structure made of corrugated plate.” Proc., 11th Seminar: Present Methods of Reinforced and Rebuilding Bridges, Poznan-Kiekrz, Poland, 98–105 (in Polish).
Madaj, A., Vaslestad, J., and Janusz, L. (1999). “Research in situ steel culvert made of corrugated plate use to rebuild railway frame viaduct.” Proc., 9th Seminar: Present Methods of Reinforced and Rebuilding Bridges, Poznan-Kiekrz, Poland, 106–117 (in Polish).
Manko, Z., and Beben, D. (2002). “On test loading acceptance of a small unconventional arch bridge construction built of steel plate.” Inzynieria i Budownictwo, Warszawa, Poland, 9, 506–509 (in Polish).
Manko, Z., and Beben, D. (2003). “Acceptance tests of detour road bridge on arch structure made of flat steel plates.” Proc., 1st Scientific-Technical Symp.: Diagnostic and Research of Bridges, Opole, Post Conference Papers, Opole-Wroclaw, Poland, 97–111 (in Polish).
McCavour, T. C., Byrne, P. M., and Morrison, T. D. (1998). “Long span reinforced steel box culverts.” A2C06, Transport Research Board Committee, Culverts and Hydraulic Structures, Washington D.C.
PN-77/S-10040. (1977). “The Polish bridge standards. Concrete and reinforced concrete bridges structure. Requirements and testing.”
PN-82/S-10052. (1982). “The Polish bridge standards. Bridge structure. Steel construction. design.”
PN-85/S-10030. (1985). “The Polish bridge standards. Bridge objects. Loads.”
PN-89/S-10050. (1989). “The Polish bridge standards. Bridge structures. Steel constructions. Requirements and testing.”
PN-91/S-10042. (1991). “The Polish bridge standards. Bridge structures. Concrete, reinforced concrete and pre-stressed concrete structures. Design.”
Vaslestad, J. (1987). “Long-span corrugated steel structure at Dover. Observations of Earth pressure stresses, deformations and temperature.” Internal Rep. No. 1134, Norwegian Road Research Laboratory, Oslo, Norway (in Norwegian).
Vaslestad, J. (1990). “Long-term behavior of flexible large-span culverts.” Transportation Research Record, 1231, Transportation Research Board, Washington, D.C., 14–24.
Wysokowski, A., Korusiewicz, L., and Kunecki, B. (1999). “Report of executed researches for structure of culverts in system multiPlate and pipe DV/AROT OPTIMA. Part I: MultiPlate.” Rep. No. TW 26999/W-374, Roads and Bridges Research Institute, Zmigrod-Weglewo, Poland (in Polish).
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Feb 3, 2004
Accepted: Oct 20, 2004
Published online: Sep 1, 2005
Published in print: Sep 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.