New AASHTO Guide Manual for Load and Resistance Factor Rating of Highway Bridges
Publication: Journal of Bridge Engineering
Volume 9, Issue 1
Abstract
This paper introduces the American Association of State Highway Officials’ (AASHTO) new Guide Manual for Condition Evaluation and Load and Resistance Factor Rating of Highway Bridges that was completed in March 2000 under a National Cooperative Highway Research Program research project and adopted as a Guide Manual by the AASHTO Subcommittee on Bridges and Structures at the 2002 AASHTO Bridge Conference. The new Manual is a companion document to the AASHTO Load and Resistance Factor Design (LRFD) Bridge Design Specifications in the same manner that the current Manual for Condition Evaluation of Bridges is to the AASHTO Standard Specifications. The new Manual is consistent with the LRFD Specifications in using a reliability based limit states philosophy and extends the provisions of the LRFD Specifications to the areas of inspection, load rating, posting and permit rules, fatigue evaluation, and load testing of existing bridges. This paper presents an overview of the manual; specifically, the new Load and Resistance Factor rating procedures are explained and the basis for their calibration is discussed.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Association of State Highway and Transportation Officials. (1989). Guide specifications for strength evaluation of existing steel and concrete bridges, AASHTO, Washington, D.C.
American Association of State Highway and Transportation Officials. (1990). Guide specifications for fatigue evaluation of existing steel bridges, AASHTO, Washington, D.C.
American Association of State Highway and Transportation Officials. (1994). Manual for condition evaluation of bridges, AASHTO, Washington, D.C.
American Association of State Highway and Transportation Officials. (1998). LRFD Bridge Design Specifications, 2nd Ed., AASHTO, Washington, D.C.
A. G. Lichtenstein and Associates, Inc. (1998). Manual for bridge rating through load testing, Transportation Res. Board No. NRD234, National Cooperative Highway Research Program (NCHRP).
Lichtenstein Consulting Engineers, Inc. (2000). “NCHRP Web Document 28; Contractor’s Final Report: Manual for Condition Evaluation and Load Rating of Highway Bridges Using Load and Resistance Factor Philosophy.” Transportation Res. Board Project No. C12-46, http://nationalacademies.org/trb/publications/nchrp/nchrp_w28.pdf
Moses, F., Schilling, C., and Raju, K. (1987). “Fatigue evaluation procedures for steel bridges.” National Cooperative Highway Research Program (NCHRP), Transportation Res. Board No. NR299.
Moses, F., and Verma, D. (1987). “Load capacity evaluation of existing bridges.” National Cooperative Highway Research Program (NCHRP). Transportation Res. Board No. NR301.
Moses, F. (2000). “Calibration of load factors for LRFR bridge evaluation.” National Cooperative Highway Research Program (NCHRP). Transportation Res. Board NCHRP Rep. No. 454.
Nowak, A. (1999). “Calibration of LRFD Bridge Design Code.” National Cooperative Highway Research Program (NCHRP), Transportation Res. Board No. NR368.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Jan 4, 2001
Accepted: Dec 20, 2002
Published online: Dec 15, 2003
Published in print: Jan 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.