Seismic Design of Concrete-Filled Circular Steel Bridge Piers
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Bridge Engineering
Volume 9, Issue 1
Abstract
The adequacy of the existing design provisions for concrete-filled steel pipes subjected to axial forces and flexure is reviewed by comparing the strengths predicted by the CAN/CSA-S16.1-M94, AISC LRFD 1994, and the Eurocode 4 1994 codes and standards against experimental data from a number of investigators. New proposed design equations are then developed, in a format compatible with North American practice. The new equations, based on a simple plasticity model calibrated using experimental data, are shown to provide improved correlation between predicted strength and experimental data. This paper provides information and data in support of the proposed design equations, which have already been implemented in the 2001 edition of the CSA-S16-01 “limit state design of steel structures” (CSA 2001) and in the “Recommended LRFD Guidelines for the Seismic Design of Highway Bridges” (MCEER/ATC 2003).
Get full access to this article
View all available purchase options and get full access to this article.
References
Alfawakiri, F. (1997). “Behavior of high strength concrete-filled circular steel tube beam columns.” MS thesis, Univ. of Ottawa, Ottawa.
American Association of State Highway and Transportation Officials (AASHTO). (1994). “LRFD bridge design specifications.” Washington, D.C.
American Concrete Institution (ACI). (1963). “Standard building code requirements for reinforced concrete.” ACI 318-63, Detroit.
American Institute of Steel Construction (AISC). (1986). Load and resistance factor design—Manual of steel construction. 1st Ed., Chicago.
American Institute of Steel Construction (AISC). (1994). Load and resistance factor design—Manual of steel construction. 2nd Ed., Chicago.
Canadian Standards Association (CSA). (1988). “Standard for the design of highway bridges—CAN/CSA-S6-88.” Rexdale Ont., Canada.
Canadian Standards Association (CSA). (1994). “Limit states design of steel structures—CAN/CSA-S16.1-94.” Rexdale, Ont., Canada.
Canadian Standards Association (CSA). (2001). “Limit states design of steel structures—CAN/CSA-S16-01.” Rexdale, Ont., Canada.
Furlong, R. W.(1967). “Strength of steel-encased concrete beam columns.” J. Struct. Div. ASCE, 93, 113–124.
Hognestad, E. (1951). “A study of combined bending and axial load in reinforced concrete members.” Bulletin Series No. 399, Univ. Illinois Eng., Experimental Station, Urbana, Ill.
Knowles, R. B., and Park, R.(1969). “Strength of concrete-filled steel tubular columns.” J. Struct. Div. ASCE, ST12, 2565–2586.
Mander, J., Priestley, M., and Park, R.(1988). “Observed stress–strain behavior of confined concrete.” J. Struct. Eng., 114(8), 1827–1849.
Marson, J., and Bruneau, M.(2004). “Cyclic testing of concrete-filled circular steel bridge piers having encased fixed-based detail.” J. Bridge Eng., 9(1), 14–23.
Marson, J., and Bruneau, M. (2000). “Cyclic testing of concrete-filledcircular steel bridge piers having encased fixed-based detail.” Ottawa Carleton Earthquake Eng. Res. Center, Rep. No. OCEERC 00-22, Univ. of Ottawa, Ottawa.
MTO. (1991). Ontario highway bridge design code, 3rd Ed., Ministry of Transportation, Government of Ontario, St. Catherines Ont., Canada.
MCEER/ATC. (2003). “Recommended LRFD guidelines for the seismic design of highway bridges.” Multidisciplinary Center for Earthquake Eng. Res. and Applied Technology Council Joint Venture, Rep. No. ATC/MCEER-49, Buffalo, N.Y.
Picard, A., and Beaulieu, D.(1997). “Resistance of concrete-filled hollow structural sections.” Can. J. Civ. Eng., 24, 785–789.
Prion, H., and Boehme, J.(1994). “Beam-column behavior of steel tubes filled with high strength concrete.” Can. J. Civ. Eng., 21(2), 207–218.
Saatcioglu, M., and Razvi, S. R.(1992). “Strength and ductility of confined concrete.” J. Struct. Eng., 118(6), 1590–1607.
Viest, I. M., Colaco, J. P., Furlong, R. W., Griffis, L. G., Leon, R. T., and Wyllie, L. A., Jr. (1997). Composite construction design for buildings, American Society of Civil Engineers and McGraw-Hill, New York.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Jun 11, 2002
Accepted: Jun 24, 2003
Published online: Dec 15, 2003
Published in print: Jan 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.