Unbonded Posttensioned Concrete Bridge Piers. I: Monotonic and Cyclic Analyses
This article has a reply.
VIEW THE REPLYPublication: Journal of Bridge Engineering
Volume 8, Issue 2
Abstract
The monotonic and cyclic behavior of a proposed unbonded, posttensioned concrete bridge pier system is studied using finite-element analyses. A procedure to evaluate seismic capacities based on results from the monotonic and cyclic analyses is described in the framework of a two-level approach considering functional- and survival-performance limits. A set of criteria to define functional-and survival-level displacement capacities for the system is developed. The proposed criteria represent improvements over existing criteria in that they are applicable to both conventional reinforced concrete structures and unbonded posttensioned structures. The monotonic and cyclic behavior of prototype single-column pier and two-column bent designs is presented. Monotonic analyses are performed to characterize the stiffness, strength, ductility, and limit-state behavior of these systems. Cyclic analyses are carried out to estimate energy dissipation capacity, residual displacements, and general hysteretic behavior. The influence of the degree of unbonded posttensioning on bridge pier behavior is examined. Using the finite-element results and the proposed criteria, seismic capacities of the prototype bridge pier systems are established.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (1996). Standard specifications for highway bridges, 16th Ed., Washington, D.C.
Billington, S. L., Barnes, R. W., and Breen, J. E.(2001). “Alternate substructure systems for standard highway bridges.” J. Bridge Eng., 6(2), 87–94.
Cheok, G. S., Stone, W. C., and Kunnath, S. K.(1998). “Seismic response of precast concrete frames with hybrid connections.” ACI Struct. J., 95(5), 527–539.
El-Sheikh, M., Pessiki, S., Sause, R., and Lu, L.-W.(2000). “Moment rotation behavior of unbonded post-tensioned precast concrete beam-column connections.” ACI Struct. J., 97(1), 122–131.
El-Sheikh, M., Sause, R., Pessiki, S., and Lu, L.-W.(1999). “Seismic behavior and design of unbonded post-tensioned precast concrete frames.” PCI J., 44(3), 54–71.
Feenstra, P. H., Rots, J. G., Arnesen, A., Teigen, J. G., and Hoiseth, K. V. (1998). “A 3D constitutive model for concrete based on a co-rotational concept.” Proc., Euro-C 1998 Conf. on Computational Modelling of Concrete Structures, R. de Borst, N. Bićanić, H. Mang, and G. Meschke, eds., Vol. 1, Balkema, Rotterdam, The Netherlands, 13–22.
FEMA. (1997). “NEHRP guidelines for the seismic rehabilitation of buildings,” FEMA-273, Washington, D.C.
Hose, Y., Silva, P., and Seible, F.(2000). “Development of a performance evaluation database for concrete bridge components and systems under simulated seismic loads.” Earthquake Spectra, 16(2), 412–442.
Ikeda, S. (1998). “Seismic behavior of reinforced concrete columns and improvement by vertical prestressing.” Challenges for Concrete in the Next Millennium, Proc., XIIIth FIP Congress, D. Stoelhorst and G. P. L. den Boer, eds., Vol. 1, Balkema Rotterdam, The Netherlands, 879–884.
Ito, T., Yamaguchi, T., and Ikeda, S.(1997). “Seismic performance of concrete piers prestressed in vertical direction.” Proc., Japan Concrete Institute, 19(2), 1197–1202 (in Japanese).
Kurama, Y. C. (1997). “Seismic analysis, behavior, and design of unbonded post-tensioned precast concrete walls.” PhD dissertation, Dept. of Civil and Environmental Engineering, Lehigh University, Bethlehem, Pa.
Kurama, Y. C., Pessiki, S., Sause, R., and Lu, L.-W.(1999a). “Seismic behavior and design of unbonded post-tensioned precast concrete walls.” PCI J., 44(3), 72–89.
Kurama, Y. C., Sause, R., Pessiki, S., and Lu, L.-W.(1999b). “Lateral behavior and seismic design of unbonded post-tensioned precast concrete walls.” ACI Struct. J., 96(4), 622–632.
Kwan, W.-P. (2001). “Seismic analysis, behavior and performance-based design of unbonded post-tensioned concrete substructure systems.” PhD dissertation, Research Rep. No. 01-01, Cornell University, Ithaca, N.Y.
Kwan, W.-P., and Billington, S. L.(2001). “Simulation of structural concrete under cyclic load.” J. Struct. Eng., 127(12), 1391–1401.
Kwan, W.-P., and Billington, S. L.(2003). “Unbonded posttensioned concrete bridge piers. II: Seismic analyses.” J. Bridge Eng., 8(2), 102–111.
Mander, J. B., and Cheng, C.-T. (1997a). “Seismic design of bridge columns based on control and repairability of damage.” Technical Rep. NCEER-97-0013, National Center for Earthquake Engineering Research, State Univ. of New York, at Buffalo, N. Y.
Mander, J. B., and Cheng, C.-T. (1997b). “Seismic resistance of bridge piers based on damage avoidance design.” Technical Rep. NCEER-97-0014, National Center for Earthquake Engineering Research, State Univ. of New York at Buffalo, N.Y.
Mander, J. B., Priestley, M. J. N., and Park, R.(1988). “Theoretical stress-strain model for confined concrete.” J. Struct. Eng., 114(8), 1804–1826.
Nilson, A. H. (1987). Design of prestressed concrete, 2nd Ed., Wiley, New York.
Priestley, M. J. N.(1996). “The PRESSS program—Current status and proposed plans for phase III.” PCI J., 41(2), 22–40.
Priestley, M. J. N.(1997). “Myths and fallacies in earthquake engineering.” Concr. Int., 19(2), 54–63.
Priestley, M. J. N., and MacRae, G. A.(1996). “Seismic tests of precast beam-to-column joint subassemblages with unbonded tendons.” PCI J., 41(1), 64–80.
Priestley, M. J. N., and Tao, J. R.(1993). “Seismic response of precast prestressed concrete frames with partially debonded tendons.” PCI J., 38(1), 58–69.
Sritharan, S., Priestley, M. J. N., and Seible, F.(1999). “Enhancing seismic performance of bridge cap beam-to-column joints using prestressing.” PCI J., 44(4), 74–91.
Sritharan, S., Priestley, M. J. N., and Seible, F.(2000). “Nonlinear finite element analyses of concrete bridge joint systems subjected to seismic actions.” Finite Elements in Analysis and Design, 36(3–4), 215–233.
Stanton, J. F., Hawkins, N. M., and Hicks, T. R.(1991). “PRESSS project 1.3: Connection classification and evaluation.” PCI J., 36(5), 62–71.
Stanton, J. F., Stone, W., and Cheok, G. S.(1997). “A hybrid reinforced precast frame for seismic regions.” PCI J., 42(2), 20–32.
Su, X., and Zhu, B.(1994). “Algorithm for hysteresis analysis of prestressed-concrete frames.” J. Struct. Eng., 120(6), 1732–1744.
Vecchio, F. J., and Collins, M. P.(1986). “The modified compression-field theory for reinforced concrete elements subjected to shear.” ACI Struct. J., 83(2), 219–231.
Vecchio, F. J., and Collins, M. P.(1993). “Compression response of cracked reinforced concrete.” J. Struct. Eng., 119(12), 3590–3610.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Jul 17, 2001
Accepted: Jan 15, 2002
Published online: Feb 14, 2003
Published in print: Mar 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.