Alternate Substructure Systems for Standard Highway Bridges
Publication: Journal of Bridge Engineering
Volume 6, Issue 2
Abstract
This paper focuses on improving bridge substructures by developing attractive and rapidly constructed substructure systems for short- and moderate-span bridges. The importance of improved substructure design is discussed. A review of current cast-in-place and precast concrete substructure systems is presented. A specific proposal for a precast segmental substructure system is described including methods of fabrication and erection. The goal of this system is to improve aesthetics and reduce construction time for standard bridges. Reduced construction time leads to important safety and economic advantages when traffic disruption or rerouting is necessary. Precasting would result in an increased use of high performance concrete and will bring improved substructure durability. Recommendations are made for standardization of precast substructure systems.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Billington, S. L. ( 1997). “Improving standard bridges through aesthetic guidelines and attractive efficient concrete substructures.” PhD dissertation, University of Texas at Austin, Austin, Tex.
2.
Billington, S. L., Barnes, R. W., and Breen, J. E. ( 1999). “A precast substructure design for standard bridge systems.” Res. Rep. 1410-2, Center for Transportation Research, Austin, Tex.
3.
Billington, S. L., and Breen, J. E. ( 1999). “Development process for a new substructure system for standard bridges.” Symp. on Struct. for the Future—The Search for Quality, Rio de Janeiro, IABSE, Vol. 83.
4.
Billington, S. L., and Breen, J. E. (2000). “Improving standard highway bridges with attention to cast-in-place substructures.”J. Bridge Engrg., ASCE, 5(4), 344–351.
5.
Billington, S. L., Ratcheye, S., Breen, J. E., and Vernooy, D. A. ( 2000). “Example applications of aesthetics & efficiency guidelines.” Concrete Int., 22(2), 66–75.
6.
California Department of Transportation (CALTRANS). ( 1990). Bridge design details, Sect. 7, Sacramento, Calif., 7-31–7-31.2.
7.
Freyermuth, C. L. ( 1992). “Building better bridges: Concrete vs. steel.” Civ. Engrg., ASCE, 62(7), 66–71.
8.
Green, P. ( 1996). “Placing spans at a dire strait.” Engrg. News Rec., Sept. 16, 26–30.
9.
Kraker, J. ( 1997). “Contractor wins race to finish roadway with days to spare.” Engrg. News Rec., July 7, 40–41.
10.
LoBuono, Armstrong & Associates, HDR Engineering, Inc., and Morales & Shumer Engineers, Inc. ( 1996). “Development of precast bridge substructures.” Prepared for the Florida Department of Transportation.
11.
Matsumoto, E. E. ( 2000). “Development of a precast bent cap system.” PhD dissertation, University of Texas at Austin, Austin, Tex.
12.
Merriam-Webster's collegiate dictionary. (1997). 10th Ed., Merriam-Webster, Inc., Springfield, Mass.
13.
Muller, J. M., and Barker, J. M. ( 1985). “Design and construction of Linn Cove Viaduct.” PCI J., 30(5), 38–53.
14.
Munn, W. D. ( 1987). “Precast cofferdams speed pier construction.” Hwy. & Heavy Constr., 130(10), 58–60.
15.
Podolny, W., Jr. and Muller, J. M. ( 1982). Construction and design of prestressed concrete segmental bridges, Wiley, New York, 543–545.
16.
Poston, R. W., Diaz, M., and Breen, J. E. ( 1986). “Design trends for concrete bridge piers.” J. ACI, 83(1), 14–20.
17.
Texas Department of Transportation (TxDOT). ( 1999). “Research project 0-1748.” Center of Transportation Research, Austin, Tex.
18.
Texas State Department of Highways and Public Transportation. ( 1984). Manual of procedures; bridge inventory, inspection and appraisal program (BRINSAP), Safety and Maintenance Operations Division, Austin, Tex., 32–33.
19.
Concrete Constr., 34(5), 447–452.
20.
West, J. S. ( 1999). “Durability design of posttensioned bridge substructures.” PhD thesis, University of Texas at Austin, Austin, Tex.
21.
Wolf, L. M., and Friedman, N. K. ( 1994). “Redfish Bay and Morris & Cummings Cut: Innovations on bridge construction and durability.” Tech. Quarterly, 9(2), 1–3.
Information & Authors
Information
Published In
Journal of Bridge Engineering
Volume 6 • Issue 2 • April 2001
Pages: 87 - 94
History
Received: Aug 11, 1998
Published online: Apr 1, 2001
Published in print: Apr 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.