Design of Mechanical Viscous Dampers for Stay Cables
This article has been corrected.
VIEW CORRECTIONPublication: Journal of Bridge Engineering
Volume 5, Issue 2
Abstract
External dampers have been utilized in a number of cable-stayed bridges to suppress transverse cable vibrations. However, simple and accurate damper design recommendations that concurrently consider all important cable parameters are lacking. Previous efforts have been based on the idealization of cables as taut strings. In this paper, the governing differential equation for vibration of cables containing a viscous damper was first converted to a complex eigenvalue problem containing nondimensional cable parameters. Then, a parametric study was conducted involving repeated solutions of the eigenvalue problem for a wide range of nondimensional parameters. Based on the results of the parametric study, the effects of dampers on first mode vibration frequencies and first mode cable damping ratios were presented in nondimensional format. It is shown that for the range of parameters involved in most stay cables, the influence of cable sag is insignificant, whereas the cable bending stiffness can have a significant influence on the resulting cable damping ratios. Simplified nondimensional relationships are proposed for calculating damper-induced changes in the first mode cable damping ratios. Results of laboratory tests on a scaled model cable are compared with the estimated values using the formulation presented. Finally, example problems are presented for comparison with other relationships, and for the design of mechanical viscous dampers for suppression of cable vibrations including rain-wind induced vibrations.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Crandall, S. H., and McCalley, R. B. Jr. ( 1996). “Chapter 28: Matrix methods of analysis.” Handbook of shock and vibration, M. H. Harris, ed., McGraw-Hill, New York.
2.
“EISPACK: A package for solving matrix eigenvalue problems.” (1977). Mathematics and Computer Science Division, Argonne National Laboratory, Argonne, Ill.
3.
Irvine, M. (1991). Cable structures. Dover, New York.
4.
Irwin, P. A. (1997). “Wind vibrations of cables on cable-stayed bridges.” Proc., ASCE Struct. Congr., ASCE, New York, 1, 383–387.
5.
Kovacs, I. (1982). “Zur frage der seilschwingungen und der seildampfung.” Die Bautechnik, 10, 325–332 (in German).
6.
Matsumoto, M., Shiraishi, N., and Shirato, H. (1992). “Rain-wind induced vibration of cables of cable-stayed bridges.” J. Wind Engrg. and Industrial Aerodyn., 41–44, 2011–2022.
7.
Mehrabi, A. B., and Tabatabai, H. (1998). “Unified finite difference formulation for free vibration of cables.”J. Struct. Engrg., ASCE, 124(11), 1313–1322.
8.
Pacheco, B. M., and Fujino, Y. (1989). “Perturbation technique to approximate the effect of damping non-proportionality in modal dynamic analysis.”J. Struct. Engrg./Earthquake Engrg., Tokyo, 6(1), 169s–178s.
9.
Pacheco, B. M., Fujino, Y., and Sulekh, A. (1993). “Estimation curve for modal damping in stay cables with viscous damper.”J. Struct. Engrg., ASCE, 119(6), 1961–1979.
10.
“Recommendations for stay cable design, testing and installation.” (1998). 4th Draft, Post-Tensioning Institute Committee on Cable-Stayed Bridges.
11.
Tabatabai, H., and Mehrabi, A. B. (1998). “Combined effects of sag and bending stiffness on cable vibrations.” Proc., 12th Engrg. Mech. Conf., 390–393.
12.
Tabatabai, H., Mehrabi, A. B., Morgan, B. J., and Lotfi, H. R. (1998). “Non-destructive bridge evaluation technology: Bridge stay cable condition assessment.” Rep. Prepared for Fed. Hwy. Admin., Construction Technology Laboratories, Inc., Skokie, Ill.
13.
Uno, K., Kitagawa, S., Tsutsumi, J., Inoue, A., and Nakaya, S. (1991). “A simple method of designing cable vibration dampers of cable-stayed bridges.”J. Struct. Engrg., Tokyo, 37, 037A, 789–798.
14.
Yoneda, M., and Maeda, K. (1989). “A study on practical estimation method for structural damping of stay cable with damper.” Proc., Canada-Japan Workshop on Bridge Aerodyn., 119–128.
Information & Authors
Information
Published In
Journal of Bridge Engineering
Volume 5 • Issue 2 • May 2000
Pages: 114 - 123
History
Received: Aug 7, 1998
Published online: May 1, 2000
Published in print: May 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.