Shear Distribution in Simply-Supported Curved Composite Cellular Bridges
Publication: Journal of Bridge Engineering
Volume 3, Issue 2
Abstract
Composite steel-concrete multicell box girder bridges are quite often used in modern bridge superstructures with curved alignments. They provide excellent torsional resistance as well as elegant appearance. While current design practices in North America recommend few analytical methods for the design of curved multicell box bridges, practical requirements in the design process require a need for a simplified design method. This paper summarizes the results from an extensive parametric study, using a finite-element model, in which 120 simply-supported curved bridge prototypes are analyzed to evaluate the shear distribution in the webs due to truck loading as well as dead load. Results from tests on four 1/12 linear-scale simply-supported curved composite concrete deck-steel three-cell bridge models are used to substantiate the analytical modeling. The parameters considered in the study are: cross-bracing system, aspect ratio, number of lanes, number of cells, and degree of curvature. Based on the data generated from the parametric study, expressions for the shear distribution factors for truck loadings as well as dead load are deduced. An illustrative design example is presented.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Aslam, M., and Godden, W. G.(1975). “Model studies of multi-cell curved box girder bridges.”J. Engrg. Mech. Div., ASCE, 101(3), 207–222.
2.
“Canadian highway bridge design code.” (1996). Ontario Ministry of Transp. and Communications, Downsview, Ont., Canada.
3.
Choudhury, D., and Scordelis, A. C. (1988). “Structural analysis and response of curved prestressed concrete box girder bridges.”Transp. Res. Rec. 1180, Hwy. Res. Board, 72–86.
4.
Fam, A. R., and Turkstra, C. J.(1976). “Model study of horizontally curved box girder.”J. Struct. Div., ASCE, 102(5), 1097–1108.
5.
“Geometric design standards for Ontario highways.” (1985). Ministry of Transp. and Communications, Downsview, Ont., Canada.
6.
Heins, C. P.(1978). “Box girder bridge design-state-of-the-art.”AISC Engrg. J., 2, 126–142.
7.
Heins, C. P., and Sheu, F. H.(1982). “Design/analysis of curved box girder bridges.”Comp. and Struct., 15(3), 241–258.
8.
Hibbitt, H. D., Karlson, B. I., and Sorenson, E. P. (1996). ABAQUS version 5.5, finite-element program. Hibbitt, Karlson & Sorenson, Inc., Providence, R.I.
9.
Li, W. Y., Tham, L. G., and Cheung, Y. K.(1988). “Curved box-girder bridges.”J. Struct. Engrg., ASCE, 114(6), 1324–1338.
10.
Ministry of Transportation and Communications. (1985). “Geometric design standards for Ontario highways.” Downsview, Ontario, Canada.
11.
Mukhherjee, D., and Trikha, D. N.(1980). “Design coefficient for curved box girder concrete bridges.”Indian Concrete J., 54(11), 301–306.
12.
Ng, S. F., Cheung, M. S., and Hachem, H. M.(1993). “Study of a curved continuous composite box girder bridge.”Can. J. Civ. Engrg., 20, 107–119.
13.
Razaqpur, A. G., and Li, H. G.(1994). “Refined analysis of curved thin-walled multi-cell box girders.”Comp. and Struct., 53(1), 131–142.
14.
Scordelis, A. C., and Larsen, P. K.(1977). “Structural response of curved RC box-girder bridge.”J. Struct. Div., ASCE, 103(8), 1057–1524.
15.
Sennah, K. M. (1998). “Load distribution and dynamic response of curved composite concrete deck-steel cellular bridges,” PhD thesis, Dept. Civ. and Envir. Engrg., Univ. of Windsor, Windsor, Ont., Canada.
16.
Sennah, K. M., and Kennedy, J. B.(1997). “Dynamic characteristics of simply supported curved composite multi-cell bridges.”Can. J. Civ. Engrg., 24, 621–636.
17.
Soliman, M. I. (1994). “Different aspects affecting the torsional stiffness of R.C. straight and curved box girder bridges.”Proc., 4th Int. Conf. on Short and Medium Span Bridges, Halifax, N.S., Canada, 129–140. Standard specifications for highway bridges .” (1996). American Association of State Highway and Transportation Officials (AASHTO), Washington, D.C.
18.
Trukstra, C. J., and Fam, A. R.(1978). “Behaviour study of curved box bridges.”J. Struct. Div., ASCE, 104(3), 453–462.
19.
Zhang, S. H., and Lyons, L. P. R.(1984). “Thin-walled box beam finite element for curved bridge analysis.”Comp. and Struct., 18(6), 1035–1046.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: May 1, 1998
Published in print: May 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.