Indicator Generalized Parameterization for Interpolation Point Selection in Groundwater Inverse Modeling
Publication: Journal of Hydrologic Engineering
Volume 14, Issue 3
Abstract
This study developed an indicator generalized parameterization (IGP) method to cope with the problem of selecting interpolation points in estimating hydraulic conductivity fields. The IGP method introduced data indicators and d-neighborhoods to describe the actual contribution of sample data to unsampled locations. Moreover, the IGP method was applied to nonkriging basis functions to characterize spatially correlated hydraulic conductivity. This study used probabilistic data indicators to take into consideration the randomness and heterogeneity of hydraulic conductivity. The groundwater inverse method, along with an adjoint state method, was adopted to estimate the indicator probabilities. Then a cutoff was applied to determine the values of the data indicators for the IGP to estimate hydraulic conductivity. The numerical example validated the IGP and illustrated the significance of selecting interpolation points for hydraulic conductivity distributions. Further, the study demonstrated the IGP applicability to estimating hydraulic conductivity in the Alamitos Gap area, Calif. It was concluded that increasing the amount of data selected for interpolation results in smaller conditional variances, but causes the ensuing distribution to be smoother. However, smooth distributions of hydraulic conductivity may not be preferred. Proper selection of interpolation points can result in better hydraulic conductivity distributions for groundwater modeling purposes.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported in part by Louisiana Board of Regents under Award No. LEQSF(2005-08)-RD-A-12 and Department of the Interior, U.S. Geological Survey under Grant Nos. 05HQGR0142 and 06HQGR0088. The thorough and constructive reviews provided by three anonymous reviewers are greatly appreciated.
References
Bard, Y. (1974). Nonlinear parameter estimation, Academic, New York.
Byrd, R. H., Lu, P., Nocedal, J., and Zhu, C. (1994). “A limited memory algorithms for bound constrained optimization.” Technical Rep. No. NAM-08, Dept. of Electrical Engineering and Computer Science, Northwestern Univ., Evanston, Ill.
Callison, J., Amabisco, M., and Wilkins, A. (1991). Hydrogeology of Alamitos Gap, Los Angeles County, Department of Public Works, Los Angeles.
Carrera, J., and Neuman, S. P. (1986). “Estimation of aquifer parameters under transient and steady-state conditions. 2: Uniqueness, stability, and solution algorithms.” Water Resour. Res., 22(2), 211–227.
Cassiani, G., and Medina, M. A. (1997). “Incorporating auxiliary geophysical data into ground-water estimation.” Ground Water, 35(1), 79–91.
Certes, C., and de Marsily, G. (1991). “Application of the pilot point method to the identification of aquifer transmissivities.” Adv. Water Resour., 14(5), 284–300.
Doherty, J. (2003). “Ground water model calibration using pilot points and regularization.” Ground Water, 41(2), 170–177.
George, E. I. (2000). “The variable selection problem.” J. Am. Stat. Assoc., 95(452), 1304–1308.
George, E. I., and McCulloch, R. E. (1993). “Variable selection via Gibbs sampling.” J. Am. Stat. Assoc., 88(423), 881–889.
Gomez-Hernanez, J. J., Sahuquillo, A., and Capilla, J. E. (1997). “Stochastic simulation of transmissivity fields conditional to both transmissivity and piezometric data. 1: Theory.” J. Hydrol., 203(1–4), 162–174.
Harbaugh, A. W., Banta, E. R., Hill, M. C., and McDonald, M. G. (2000). “MODFLOW-2000, the U.S. Geological Survey modular ground-water model—User guide to modularization concepts and the ground-water flow Process.” U.S. Geological Survey Open-File Rep. No. 00-92, Washington, D.C.
Hocking, R. R. (1972). “Criteria for selection of a subset regression—Which one should be used.” Technometrics, 14(4), 967–970.
Isaaks, E. H., and Srivastava, E. H. (1989). An introduction to applied geostatistics, Oxford University Press, Oxford, U.K.
Kitanidis, P. K., and Vomvoris, E. G. (1983). “A geostatistical approach to the inverse problem in groundwater modeling (steady-state), and one-dimensional simulations.” Water Resour. Res., 19(3), 677–690.
Kohn, R., Smith, M., and Chan, D. (2001). “Nonparametric regression using linear combinations of basis functions.” Stat. Comput., 11(4), 313–322.
Kuo, L., and Mallick, B. (1997). “Bayesian semiparametric inference for the accelerated failure-time model.” Can. J. Stat., 25(4), 457–472.
LaVenue, A. M., RamaRao, B. S., de Marsily, G., and Marietta, M. G. (1995). “Pilot point methodology for automated calibration of an ensemble of conditionally simulated transmissivity fields. 2: Application.” Water Resour. Res., 31(3), 495–516.
Neuman, S. P., and Yakowitz, S. (1979). “Statistical approach to the inverse problem of aquifer hydrology. 1: Theory.” Water Resour. Res., 15(4), 845–860.
RamaRao, B. S., LaVenue, A. M., de Marsily, G., and Marietta, M. G. (1995). “Pilot point methodology for automated calibration of an ensemble of conditionally simulated transmissivity fields. 1: Theory and computational experiments.” Water Resour. Res., 31(3), 475–493.
Sibson, R. A. (1980). “A vector identity for the Dirichlet tessellation.” Math. Proc. Cambridge Philos. Soc., 87(1), 151–155.
Sibson, R. A. (1981). “A brief description of natural neighbour interpolation.” Interpreting multivariate data, Chap. 2, V. Barnett, ed., Wiley, New York.
Stone, M. (1974). “Cross-validatory choice and assessment of statistical predictions.” J. R. Stat. Soc. Ser. B (Methodol.), 36(2), 111–147.
Sun, N.-Z., Yang, S.-L., and Yeh, W. W.-G. (1998). “A proposed stepwise regression method for model structure identification.” Water Resour. Res., 34(10), 2561–2572.
Sun, N.-Z., and Yeh, W. W.-G. (1985). “Identification of parameter structure in groundwater inverse problem.” Water Resour. Res., 21(6), 869–883.
Tsai, F. T.-C. (2006). “Enhancing random heterogeneity representation by mixing the kriging method with the zonation structure.” Water Resour. Res., 42, W08428.
Tsai, F. T.-C., Sun, N.-Z., and Yeh, W. W.-G. (2003a). “A combinatorial optimization scheme for parameter structure identification in ground water modeling.” Ground Water, 41(2), 156–169.
Tsai, F. T.-C., Sun, N.-Z., and Yeh, W. W.-G. (2003b). “Global-local optimization for parameter structure identification in three-dimensional groundwater modeling.” Water Resour. Res., 39(2), 1043.
Tsai, F. T.-C., Sun, N.-Z., and Yeh, W. W.-G. (2005). “Geophysical parameterization and parameter structure identification using natural neighbors in groundwater inverse problems.” J. Hydrol., 308(1–4), 269–283.
Tsai, F. T.-C., and Yeh, W. W.-G. (2004). “Characterization and identification of aquifer heterogeneity with generalized parameterization and Bayesian estimation.” Water Resour. Res., 40(10), W10102.
Wagner, B. J., and Gorelick, S. M. (1986). “A statistical methodology for estimating transport parameters—Theory and applications to one-dimensional advective-dispersive systems.” Water Resour. Res., 22(8), 1303–1315.
Watson, D. F. (1981). “Computing the n-dimensional Delaunay tessellation with application to Voronoi polytopes.” Comput. J., 24(2), 167–172.
Yeh, W. W.-G., and Sun, N.-Z. (1990). “Variational sensitivity analysis, data requirements, and parameter-identification in a leaky aquifer system.” Water Resour. Res., 26(9), 1927–1938.
Yeh, W. W.-G., and Yoon, Y. S. (1976). “A system identification procedure for the identification of inhomogeneous aquifer parameters.” Advances in groundwater hydrology, Z. A. Saleen, ed., AWRA, Minneapolis, Minn., 72–82.
Yeh, W. W.-G., and Yoon, Y. S. (1981). “Aquifer parameter-identification with optimum dimension in parameterization.” Water Resour. Res., 17(3), 664–672.
Zheng, C., and Wang, P. (1996). “Parameter structure identification using tabu search and simulated annealing.” Adv. Water Resour., 19(4), 215–224.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Jan 22, 2008
Accepted: Jun 3, 2008
Published online: Mar 1, 2009
Published in print: Mar 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.