Design of Concrete Members Subjected to Triaxial Compression
Publication: Practice Periodical on Structural Design and Construction
Volume 14, Issue 1
Abstract
A new strength theory for the design of concrete members subjected to triaxial compression stress has been developed which is an extension of the traditional Mohr’s strength theory. This new theory explicitly relates the maximum principal stress, , to the confining pressure, . It is shown that this new theory requires information about the uniaxial compressive strength, , the uniaxial tensile strength, , and a quantity relating to the shape of Mohr’s envelope of ultimate strength states which depends on the degree of confinement. Because few test results that include the values of have been reported in the engineering literature, a preliminary and simplified version of this new theory has been proposed and verified using results from 236 tests of normal strength concrete specimens and 50 tests of high strength concrete specimens previously reported in the engineering literature. Agreement between values predicted by means of the proposed theory and test results has been found to be satisfactory.
Get full access to this article
View all available purchase options and get full access to this article.
References
Akroyd, T. N. W. (1961). “Concrete under triaxial stress.” Concrete research, Vol. 13, Issue 39, Cement and Concrete Association, U.K., 111–118.
American Concrete Institute (ACI). (2002). Building code requirements for structural concrete (318-02) and commentary (318R-02), ACI Committee 318, Farmington Hills, Mich.
Ansari, F., and Li, Q.-b. (1998). “High strength concrete subjected to triaxial compression.” ACI Mater. J., 95(6), 747–755.
Avram, C., Facadaru, R. E., Filimon, I., Mîrşu, O., and Tertea, I. (1981). Concrete strength and strains, Elsevier Scientific, Amsterdam, The Netherlands, 156–178.
Balmer, G. G. (1949). “Shearing strength of concrete under high triaxial stress—Computation of Mohr’s envelope as a curve.” Structural Research Laboratory Report No. SP-23, Branch of Design and Construction, Denver.
Candappa, D. C., Sanjayan, J. G., and Setunge, S. (2001). “Complete triaxial stress-strain curves of high-strength concrete.” J. Mater. Civ. Eng., 13(3), 209–215.
Chen, W. F. (1982). Plasticity in reinforced concrete, McGraw-Hill, New York.
Chen, W. F., and Han, D. J. (1988). Plasticity for structural engineers, Springer, New York.
Chen, W. F., and Saleeb Atef, F. (1994). Constitutive equations for engineering materials, Vol. 1, Elsevier, Amsterdam, The Netherlands.
Chinn, J., and Zimmerman, R. M. (1965). “Behavior of plain concrete under various high triaxial compression loading conditions.” Technical Rep. No. WL TR 64-163, University of Colorado, Denver.
Considere, A. (1903). Experimental researches on reinforced concrete, L. L. Moisseiff, English translation, McGraw-Hill, New York.
Cordon, W. A., and Gillespie, H. A. (1963). “Variables in concrete aggregates and Portland cement paste which influence the strength of concrete.” ACI Struct. J., 60(9), 1029–1050.
Fan, S.-C., and Wang, F. (2002). “A new strength criterion for concrete.” ACI Struct. J., 99(3), 317–326.
Gardner, N. J. (1969). “Triaxial behavior of concrete.” ACI Struct. J., 66(2), 136–146.
Gunawan, L. (2003). “Ultimate strength of plain concrete subjected to triaxial stresses.” Ph.D. thesis, Illinois Institute of Technology, Chicago.
Guralnick, S. A. (1960). “Strength of reinforced concrete beams.” Trans. ASCE J., 125, 603–643.
Guralnick, S. A., and Gunawan, L. (2006). “Strengthening of reinforced concrete bridge columns with FRP wrap.” Pract. Period. Struct. Des. Constr., 11(4), 218–228.
Hobbs, D. W. (1972). “The strength and deformation properties of plain concrete under combined stress RILEM: The deformation and the rupture of solids subjected to multiaxial stresses.” 17th Int. Symp., Secretariat General, 12 Rue Brancian, Paris XV, France.
Imran, I., and Pantazopoulou, S. J. (1996). “Experimental study of plain concrete under triaxial stress.” ACI Mater. J., 93(6), 589–601.
Khan, A. S., and Huang, S. (1995). Continuum theory of plasticity, Wiley, New York.
Krishnaswamy, K. T. (1968). “Strength and microcracking of plain concrete under triaxial compression.” ACI Struct. J., 65(10), 856–862.
Mills, L. L., and Zimmerman, R. M. (1970). “Compressive strength of plain concrete under multiaxial loading conditions.” ACI J., 67(10), 802–807.
Mohr, O. (1914). Abhandlungen aus dem Gebiet d. technischen Mechanik, Belrin, 192.
Mullar, K. F. (1975). Dissertation, Technische Universitat, Munchen, Germany.
Nadai, A. (1950). Theory of flow and fracture of solids, 2nd Ed., Vol. 1, McGraw-Hill Book Company, New York, 89–108, 107–228.
Ottosen, N. S. (1977). “A failure criterion for concrete.” J. Engrg. Mech. Div., 103(4), 527–535.
Palaniswamy, R., and Rangaswamy, G. (1973). “Fracture and stress-strain law of concrete under triaxial compressive stresses.” Ph.D. thesis, Univ. of Illinois at Chicago, Chicago.
Palaniswamy, R., and Shah, S. P. (1974). “Fracture and stress-strain relationship of concrete under triaxial compression.” J. Struct. Div., 100(5), 901–916.
Richart, E. F., Brandtzaeg, A., and Brown, L. R. (1928). “A study of the failure of concrete under combined compressive stresses.” Univ. of Illinois Bulletin, No. 185, Engineering Experiment Station, Urbana, Ill.
Sfer, D., Carol, I., Gettu, R., and Etse, G. (2002). J. Eng. Mech., 128(2), 156–163.
Singh, S. (1968). “Strength of plain concrete subjected to multi-axial stress states.” MSc thesis, Illinois Institute of Technology, Chicago.
Smee, D. J. (1967). “The effect of aggregate size and concrete strength on the failure of concrete under triaxial compression.” Civ. Eng. Trans., October, 339–345.
Willam, K. J., and Warnke, E. P. (1975). “Constitutive model for the triaxial behaviour of concrete.” Seminar on concrete structures subjected to triaxial stresses, Vol. 19, International Assocaition for Bridge and Structure Engineering, Bergand, Italy, 1–30.
Yu, M. H. (1983). “Twin shear stress yield criterion.” Int. J. Mech. Sci., 25(1), 71–74.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Feb 28, 2008
Accepted: May 7, 2008
Published online: Feb 1, 2009
Published in print: Feb 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.