Mold—A Structural Engineer’s Perspective
Publication: Practice Periodical on Structural Design and Construction
Volume 12, Issue 2
Abstract
Mold is a clear and present danger that the practicing structural engineer should be aware of and equipped to handle. Although mold has been with us since the dawn of time, toxicologists have only recently trumpeted the need for concern with respect to indoor air quality and human exposure. The availability of moisture and organic matter in the building envelope are the key factors in controlling the occurrence and spread of mold. Consequently, the structural engineer must be aware of the risks that mold presents to building occupants and the importance of building design in limiting the potential for mold impacts. The danger areas for the structural engineer include; current design practices, the insurance industry’s efforts to shift responsibility for mold remediation to construction professionals and building owners, the legal profession’s proclivity to litigate, and the general public’s perception that molds are “toxic” and serious health hazards. The structural engineer is also being compelled to design tighter structures using more “green” building materials, which adds further challenge in preventing the growth of mold. Thus, the structural engineer must work closely with the architect and project design team during the engineering design phase to limit the potential for mold impact and limit the project team’s liability for mold impacts over the projected life of the new structure. A short check list prepared and presented by the writers should assist the structural engineer with this effort.
Get full access to this article
View all available purchase options and get full access to this article.
References
Barron, A. J. (2002). “An overview on mold—the latest challenge to the construction industry.” Thelen Reid & Priest LLP, ⟨http://www.constructionweblinks.com/Resources/Industry_Reports⟩.
Centers for Disease Control and Preventation (CDC). (2005a). “Basic facts about mold.” National Center for Environmental Health, ⟨http://www.cdc.gov/mold/basics.htm⟩.
Centers for Disease Control and Preventation (CDC). (2005b). “Get rid of mold.” National Center for Environmental Health, ⟨http://www.cdc.gov/mold/cleanup.htm⟩.
Centers for Disease Control and Preventation (CDC). (2005c). “Molds in the environment.” National Center for Environmental Health, ⟨http://www.cdc.gov/mold/faqs.htm⟩.
Dybdahl, D. (2003). Domino effect, American Risk Management Resources Network, LLC, Middleton, Wis.
Gomes, A. (2003). “Legal showdown looms over Hilton mold tab.” The Honolulu Advertiser, April 27.
Insurance Information Institute. (2003). Mold and Insurance, New York.
Insurance Information Institute. (2005). Mold and the insurance industry, New York.
Lstiburek, J. (2002). “Moisture, building enclosures, and mold.” HPAC Engineering, Part 2 of 2.
Lstiburek, J., and Brennan, T. (2005). “Healthy and affordable housing: Housing and asthma; practical recommendations for building, renovating and maintaining housing.” Sponsored by U.S. Department of Housing and Urban Development, U.S. Department of Energy, Washington, D.C.
Occupational Safety and Health Administration (OSHA). (2003). A brief guide to mold in the workplace, Directorate of Science, Technology and Medicine, Office of Science and Technology Assessment, U.S. Department of Labor, Washington, D.C.
Quesada, T. (2006). “Mold spawning litigation.” The Business Journal of Jacksonville.
U.S. Environmental Protection Agency (USEPA). (2001). “Mold remediation in schools and commercial buildings.” EPA 402-K-01-001, Office of Air and Radiation, Indoor Environments Division, Washington, D.C.
U.S. Environmental Protection Agency (USEPA). (2002). “A brief guide to mold, moisture and your home.” EPA 402-K-02-003, Office of Air and Radiation, Indoor Environments Division, Washington, D.C.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Apr 24, 2006
Accepted: May 3, 2006
Published online: May 1, 2007
Published in print: May 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.