Optimum Layout of Buildings Subjected to Geometric Constraints
Publication: Practice Periodical on Structural Design and Construction
Volume 10, Issue 4
Abstract
Given the preliminary layout of a building, the vertical members will be relocated through optimization techniques to obtain the best building performance possible when subjected to lateral loads under specified constraints. The analysis is based on a nonlinear programming algorithm and the movable elements are chosen using a sensitivity analysis. The optimization will be done for static constraints. The analysis is carried out in conjunction with a finite element code. Examples are presented.
Get full access to this article
View all available purchase options and get full access to this article.
References
Balling, R. J., and Yoa, X. (1997). “Optimization of reinforce concrete frames.” J. Struct. Eng., 123(2), 193–202.
Bertero, R. D. (1995). “Inelastic torsion for preliminary seismic design.” J. Struct. Eng., 121(8), 1183–1189.
Bertero, V. (1996). “State-of-the-arte report on: Design criteria.” Proc., 11th World Conf. on Earthquake Engineering, Paper No. 2005.
Blume, J., Newmark, N. M., and Corning, L. (1961). Design of multi-storey reinforced concrete buildings for earthquake motions, Portland Cement Association, Chicago.
Chan, C., Grierson, D. E., and Sherbourne, A. N. (1995). “Automatic optimal design of tall steel building frameworks.” J. Struct. Eng., 121(5), 838–847.
Daniels, R. W. (1978). An introduction to numerical methods and optimization techniques, Elsevier North-Holland, New York.
Building Seismic Safety Council. (1997). “NEHRP recommended provisions for seismic regulations for new buildings and other structures.” Washington, D.C.
Goel, R., and Chopra, A. (1993). “Seismic code analysis of buildings without locating centers of rigidity.” J. Struct. Eng., 119(10), 3039–3055.
International Conference of Building Officials. (1997). “Uniform building code.” Whittier, Calif.
Kato, B., Nakamura, Y., and Anraku, H. (1972). “Optimum earthquake design of shear buildings.” J. Eng. Mech. Div., 98(4), 891–910.
Lin, J. H., Che, W. Y., and Yu, Y. S. (1982). “Structural optimization on geometrical configuration and element sizing with statical and dynamical constraints.” Comput. Struct., 15(5), 507–515.
Martin, C. R., and Soong, T. T. (1976). “Modal control of multistory structures.” J. Eng. Mech. Div., 102(4), 613–623.
Naeim, F. (1989). The seismic design handbook, Van Nostrand Reinhold, New York, 171.
Nelder, J. A., and Mead, R. (1964). “A simplex method for function minimization.” Comput. J., 7, 308–313.
Ohsaki, M., Nakamura, T., and Isshiki, Y. (1998). “Shape-size optimization of plane trusses with designer’s preference.” J. Struct. Eng., 124(11), 1323–1330.
Paulay, T., and Priestley, M. J. N. (1992). Seismic design of reinforced concrete and masonry buildings, Wiley, New York.
Shrestha, S. M., and Ghaboussi, J. (1998). “Evolution of optimum shapes using genetic algorithm.” J. Struct. Eng., 124(11), 1331–1338.
Spires, D., and Arora, J. S. (1990). “Optimal design of tall RC-framed tube buildings.” J. Struct. Eng., 116(4), 877–897.
Topping, B. H. V. (1983). “Shape optimization of skeletal structures: A review.” J. Struct. Eng., 109(8), 1933–1951.
Vanderplaats, G. N. (1993), Structural optimization: Status and promise, M. P. Kamat, ed., American Institute of Aeronautics and Astronautics, Inc., Washington D.C., 29–49.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: May 25, 2004
Accepted: Oct 27, 2004
Published online: Nov 1, 2005
Published in print: Nov 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.