Discussion on AASHTO LRFD Load Distribution Factors for Slab-on-Girder Bridges
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Practice Periodical on Structural Design and Construction
Volume 10, Issue 3
Abstract
The present study developed a new set of formulas for load distribution factors that are more rational than the current AASHTO LRFD formulas. A formula to quantify the intermediate diaphragm effect on live load distribution was also proposed. Preliminary coefficients of these formulas were obtained from curve fitting either with the values of AASHTO LRFD formulas or with the results from finite element modeling. The load distribution factors predicted with the proposed formulas were compared with those from AASHTO codes, field measurements, and finite element analysis with or without considering the effects of intermediate diaphragms. While the present study was intended to shed some light in developing future AASHTO LRFD design formulas, development of complete load distribution factors is out of the scope of the present study.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (1996). Standard specification for highway bridges, Washington, D.C.
AASHTO. (1998). LRFD bridge design specifications, Washington, D.C.
Abendroth, R. E., Klaiber, F. W., and Shafer, M. W. (1995). “Diaphragm effectiveness in prestressed-concrete girder bridges.” J. Struct. Eng., 121(9), 1362–1369.
Arockiasamy, M., Amer, A., and Bell, N. (1997). Load distribution on highway bridges based on field test data: Phase II, Report submitted to Florida Dept. of Transportation, Florida Atlantic Univ., Boca Raton, Fla.
Barker, M. G. (2001). “Quantifying field-test behavior for rating steel girder bridges.” J. Bridge Eng., 6(4), 254–261.
Barr, P., Eberhard, M. O., and Stanton, J. (2001). “Live-load distribution factors in prestressed concrete girder bridges.” J. Bridge Eng., 6(5), 298–306.
Cai, C. S., and Shahawy, M. (2004). “Predicted and measured performance of prestressed concrete bridges.” J. Bridge Eng., 9(1), 4–13.
Cai, C. S., Shahawy, M., and Peterman, R. J. (2002). “Effect of diaphragms on load distribution in prestressed concrete bridges.” Transportation Research Record 1814, Transportation Research Board, National Research Council, Washington, D.C., 47–54.
Green, T. M., Yazdani, N., Spainhour, L., and Cai, C. S. (2002). “Intermediate diaphragm and temperature effects on concrete bridge performance.” Transportation Research Record 1814, Transportation Research Board, National Research Council, Washington, D.C., 83–90.
Heins, C. P., and Kuo, J. T. C. (1975). “Ultimate live load distribution factor for bridges.” J. Struct. Div. ASCE, 101(7), 1481–1496.
Kim, S., and Nowak, A. S. (1997). “Load distribution and impact factors for I-girder bridges.” J. Bridge Eng., 2(3), 97–104.
Mabsout, M. E., Tarhini, K. M., Frederick, G. R., and Kesserwan, A. (1999). “Effect of multilanes on wheel load distribution in steel girder brudges.” J. Bridge Eng., 4(2), 99–106.
Zokaie, T., Osterkamp, T. A., and Imbsen, R. A. (1991). “Distribution of wheel load on highway bridges.” National Cooperative Highway Research Program Report 12-26/1, Transportation Research Board, Washington, D.C.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Nov 4, 2003
Accepted: Jan 12, 2004
Published online: Aug 1, 2005
Published in print: Aug 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.