Horizontal Support of Historic Roof Structures: Design and Structural Efficiency
Publication: Journal of Architectural Engineering
Volume 14, Issue 1
Abstract
In historic buildings, a variety of different types of timber roof structures reflecting different building traditions and different ideals for the inner space are found. In Sweden, damage to historic roof structures due to a lack of support for horizontal thrust is common. Knowledge of the relation between structurally efficient horizontal support and the extension of a structure in space is essential for obtaining an adequate understanding of the development of building techniques and for making sound decisions concerning restoration. An approach that involves a classification of horizontal supporting structures, together with a mechanical model that defines and distinguishes between inner and outer support, is introduced, with the aim of offering a tool for comparison of different roof-truss designs with focus on the occupation in space. Comparison of the efficiency of different designs is carried out by comparing horizontal stiffness. Eleven different designs divided into four spatial groups have been analyzed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The Lars Erik Lundberg Scholarship Foundation, Formas, and the Elna Bengtsson Foundation are thanked for their financial support.
References
Blackett-Ord Consulting Engineers. (2006). “Structural problems in timber roofs.” ⟨http://freespace.virgin.net/elaine.rigby/roofs.htm⟩ (Feb. 2, 2007).
CALFEM. (1999). “A finite element toolbox to MATLAB: ver. 3.3.” Division of Structural Mechanics, Lund Univ., Lund, Sweden.
Courtenay, L. T. (1993). “Timber roofs and spires.” Architectural technology up to the scientific revolution: The art and structure of large-scale buildings, R. Mark, ed., MIT Press, Cambridge, Mass.
“Historical roofs.” (2006). ⟨http://www.roofs.cz/⟩ (Feb. 2, 2007).
MATLAB. (2003). The Math Works Inc., ⟨http://www.mathworks.com⟩.
Ochshorn, J. (1996). “Contradictions in use of collar beams.” J. Archit. Eng., 2(1), 20–25.
Saabye Ottosen, N., and Petersson, H. (1992). Introduction to the finite element method, Prentice-Hall, New York.
Sandin, Y. (1996). “Verkningssätt hos äldre trätakstolar i svenska kyrkor: kunskapsöversikt och fallstudie (Structural behaviour of old wooden roof trusses in Swedish churches: Survey and case study).” Chalmers Univ. of Technology, Göteborg, Sweden (in Swedish).
Sjömar, P. (1995). “Romanskt och gotiskt—takkonstruktioner i svenska medeltidskyrkor.” Hikuin, 22, 207–230 (in Swedish).
Sjömar, P. (2000). “Byggnadsteknik och kyrkorrum: Kyrklig timmerbyggnadskonst under 1600-och 1700-talen.” Kyrka af träd: kyrkobyggande under 1600-och 1700-talen i Finland, Norge och Sverige, I. Sjöström, ed., Riksantikvarieämbetet, Stockholm, Sweden, 123–145 (in Swedish).
Szabó, B. (2005). Illustrated dictionary of historic load bearing structures. Kriterion Utilitas, Cluj-Napoca, Romania.
Szabó, B. (2006). “Restoration of historic roof structures on common rafter and tie-beams with collars.” Proc., Int. Conf. on Structural Analysis of Historical Construction. Possibilities of Numerical and Experimental Techniques, P. B. Lourenco et al., eds., New Delhi, India.
Information & Authors
Information
Published In
Journal of Architectural Engineering
Volume 14 • Issue 1 • March 2008
Pages: 18 - 24
Copyright
© 2008 ASCE.
History
Received: Jun 1, 2006
Accepted: May 21, 2007
Published online: Mar 1, 2008
Published in print: Mar 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.