Material Flow-Based Facility Layout Analysis of a Manufactured Housing Production Plant
Publication: Journal of Architectural Engineering
Volume 12, Issue 4
Abstract
The layout of an assembly line type production plant can be designed or evaluated based on multiple criteria including, qualitative and/or quantitative aspects according to Mehrotra et al. in 2005. This paper presents the process of quantitative modeling and evaluation of the facility layout alternatives of a manufactured housing plant based on the material flow aspect. Manufactured homes are built on an assembly line similar to other manufactured products. However, production process, facility layout, and material handling system of the manufactured housing industry in the United States are still primitive as compared to automobile or other technologically advanced manufacturing facilities. In many of the manufactured housing factories, the facility layouts are inefficient because the stations are arranged without any prior planning and evaluation. The facility layout technologies in industrial engineering are used to develop an efficient facility layout for a manufactured housing plant. A manufactured housing plant was used as a case study plant. A material-flow based quantitative model was developed and implemented in a facility layout evaluation software program, FACTORYFLOW by EDS in 2002. The software was used to analyze the impact of material-flow on the facility layout of the case study plant and to develop alternatives. These layout alternatives were evaluated based on the feasibility and the projected cost savings. The analysis results indicated that many alternatives will result in cost savings as compared to existing layout. Once the alternatives were generated and evaluated, the comprehensive process steps for evaluating the facility layout alternatives based on the material-flow were developed in the form of a process flow diagram.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The funding for this research is provided by the National Science Foundation NSFCMS-0080209 and NSFCMS-0229856 as part of its Partnership for Advancing Technology in Housing Initiative in conjunction with the U.S. Department of Housing and Urban Development. In addition, Michigan Manufactured Housing Association and Indiana Manufactured Housing Association and two of their members provided industry support. The writers gratefully acknowledge these contributions.
References
Banerjee, D. (2003). “Material flow-based analysis of manufactured housing production plant facility layout.” Master's thesis, Michigan State Univ., East Lansing, Mich.
Barriga, E. (2003). “Material supply management system for manufactured housing industry.” MS thesis, Construction Management Program, Purdue Univ., Ind.
Donaghey, C. E., and Pire V. F. (2000). MHAND, BLOCPLAN Industrial Engineering Dept., Univ. of Houston, Houston.
EDS. (2002). FactoryFlow Class Guide, FactoryFLOW Training Manual, V. 1.2.
Engineering Animation, Inc. (EAI). (1999). FactoryPLAN user's manual, USG Corp., Plano, Tex.
Hammad, A. A. A. (2001). “Simulation modeling for manufactured processes in construction.” Master's thesis, Dept. of Civil and Environmental Engineering, Univ. of Cincinnati, Cincinnati.
Hammad, A. A. A. (2003). “A decision support system for manufactured housing production process planning and facility design.” Ph.D. dissertion, Dept. of Civil and Environmental Engineering, Univ. of Cincinnati, Cincinnati.
Heragu, S. (1997). Facilities design, PWS Publishing Company, Boston.
Manufactured Housing Research Alliance (MHRA). (2000). “Plants that shine.” Newsletter 2(1).
Mehrotra, N., Syal, M., and Hastak, M. (2004). “Manufactured housing trends and codes in Michigan.” Journal of the American Institute of Constructors, 28(1), 26–36.
Mehrotra, N., Syal, M., and Hastak, M. (2005). “Manufactured housing production layout design.” J. Archit. Eng., 11(1), 25–34.
Mullens, M. (2004). “Housing constructability laboratory.” http://hcl.engr.ucf.edu/research.htm (Sep. 2004).
Partnership for Advancing Technologies in Housing (PATH). (2004). Focus Area Rep. on Whole House, http://www.pathnet.org/i.asp?id=1062 (Sep. 2004).
Ragsdale, C. T. (2001). Spreadsheet modeling and decision analysis, 3rd Ed., South-Western, Ohio.
Senghore, O. (2001). “The production and material flow process model for manufactured housing.” MS thesis, Construction Management Program, Michigan State Univ., East Lansing, Mich.
Tompkins, J. A., White, J. A., Bozer, Y. A., Frazelle, E. H., Tanchoco, J. M. A., and Trevino, J. (1996). Facilities planning, Wiley, New York.
Information & Authors
Information
Published In
Journal of Architectural Engineering
Volume 12 • Issue 4 • December 2006
Pages: 196 - 206
Copyright
© 2006 ASCE.
History
Received: Sep 14, 2004
Accepted: Sep 12, 2005
Published online: Dec 1, 2006
Published in print: Dec 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.