Software Environment to Support Early Phases in Building Design (SEED): Overview
Publication: Journal of Architectural Engineering
Volume 1, Issue 4
Abstract
This paper describes the overall goals of SEED, the approach taken by its developers to achieve these goals, and the subprojects that comprise the entire project. SEED aims at providing computational support for the early design phase in all aspects that can benefit from such support. It addresses specifically architectural programming, schematic layout design, and the generation of a fully three-dimensional configuration of physical building components like structure and enclosure. These tasks are handled by three individual modules, SEED-Pro, SEED-Layout, and SEED-Config. A standards processor is under development to support standards and code checking in any module, as is an object database to store and retrieve different design versions, alternatives, and past designs that can be reused and adapted in different contexts (case-based design). Usability issues, especially the interfaces to the modules, receive special attention. Subsequent papers elaborate on these efforts in greater detail. The present paper provides an overview of the entire project and introduces shared concepts presumed known in subsequent papers.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Akin, Ö., Sen, R., Donia, M., and Zhang, Y.(1995). “SEED-Pro: computer-assisted architectural programming in SEED.”J. Arch. Engrg., ASCE, 1(4), 153–161.
2.
Bhavnani, S., Flemming, U., Garrett, J., and Shaw, D. (1995). “Understanding and helping CAD users in the real world.”Proc., ACADIA95 Workshop.
3.
Carrara, G., Kalay, Y. E., and Novembri, G. (1994). “Knowledge-based computational support for architectural design.”Knowledge-based computer-aided architectural design, G. Carrara and Y. E. Kalay, eds., Elsevier, New York, N.Y., 147–201.
4.
Coyne, R. F., Flemming, U., Piela, P., and Woodbury, R. (1993). “Behavior modeling in design system development.”CAAD Futures '93: Proc., Int. Conf. on Comp.-Aided Arch. Des. Futures, U. Flemming and S. Van Wyk, eds., Elsevier, New York, N.Y., 335–354.
5.
Domeshek, E. A., and Kolodner, J. L. (1992). “A case-based design aid for architecture.”Proc., Artificial Intelligence in Des. '92, J. Gero, ed., Kluwer Academic Publishers, Boston, Mass., 497–516.
6.
Fenves, S., et al. (1994). Concurrent computer-integrated building design. Prentice-Hall, Englewood Cliffs, N.J.
7.
Fenves, S. J., Rivard, H., Gomez, N., and Chiou, S.-C.(1995). “Conceptual structural design in SEED.”J. Arch. Engrg., ASCE, 1(4), 179–186.
8.
Flemming, U. (1994). “Case-based design in the SEED system.”Knowledge-based computer-aided architectural design, G. Carrara and Y. E. Kalay, eds., Elsevier, New York, N.Y., 69–91.
9.
Flemming, U., and Chien, S.-F.(1995). “Schematic layout design in SEED environment.”J. Arch. Engrg., ASCE, 1(4), 162–169.
10.
Flemming, U., Coyne, R., and Snyder, J. (1994a). “Case-based design in the SEED system.”Proc., 1st Congr. on Comp. in Civ. Engrg., K. Khozeimeh, ed., 446–453.
11.
Flemming, U., Coyne, R., Fenves, S., Garrett, J., and Woodbury, R. (1994b). “SEED: A software environment to support the early phases in building design.”Proc., IKM '94 ( Internationales Kolloquium ueber Anwendungen der Informatik und Mathematik in Architektur und Bauwesen ), L. Hempel, ed., 5–10.
12.
Flemming, U., and Woodbury, R.(1995). “Software environment to support early phases in building design (SEED).”J. Arch. Engrg., ASCE, 1(4), 147–152.
13.
Garrett, J. H. Jr., Kiliccote, H., and Choi, B.(1995). “Providing formal support for standards usage within SEED.”J. Arch. Engrg., ASCE, 1(4), 187–194.
14.
Gielingh, W. (1988). “General AEC reference model.”ISO TC 184/SC4/WG1 doc 3.2.2.1, TNO Rep. BI-88-150.
15.
Hua, K., Smith, I., Faltings, B., Shih, S., and Schmitt, G. (1992). “Adaptation of spatial design cases.”Proc., Artificial Intelligence in Design '92, J. Gero, ed., Kluwer Academic Publ., Boston, Mass., 559–575.
16.
Jacobson, I., Christerson, M., Jonsson, P., and Overgaard, G. (1992). Object-oriented software engineering : a use case driven approach . Addison-Wesley, New York, N.Y.
17.
Kolodner, J. L.(1991). “Improving human decision making through case-based decision aiding.”AI Mag., 12(2), 52–68.
18.
Pohl, J., and Myers, L. (1993). “A distributed cooperative model for architectural design.”Knowledge-based computer-aided architectural design, G. Carrara and Y. E. Kalay, eds., Elsevier, New York, N.Y., 205–242.
19.
Rutherford, J. H. (1993). “KNODES: knowledge-based design decision support.”CAAD Futures '93: Proc., Int. Conf. on Comp.-Aided Arch. Des. Futures, U. Flemming and S. Van Wyk, eds., Elsevier, New York, N.Y., 357–374.
20.
Snyder, J., Aygen, Z., Flemming, U., and Tsai, J.(1995). “SPROUT—modeling language for SEED.”J. Arch. Engrg., ASCE, 1(4), 195–203.
21.
Woodbury, R., and Chang, T.-W.(1995). “Massing and enclosure design with SEED-Config.”J. Arch. Engrg., ASCE, 1(4), 170–178.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Dec 1, 1995
Published in print: Dec 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.