Excavation of Surface Installed Pipeline
Publication: Journal of Infrastructure Systems
Volume 7, Issue 3
Abstract
A research program was undertaken to investigate the behavior of high-density polyethylene pipe during surface installation by horizontal directional drilling. In the fall of 1997, an instrumented high-density polyethylene pipe [55 m (180 ft) long, 200 mm (8 in.) in diameter, and dimension ratio of 17] was installed and monitored. Approximately 2 years later, three test pit excavations were completed to obtain in situ information along the bore, including pipe subsurface profile, characterization of site soils and bore slurry surrounding the pipe, location of the pipe in the bore, and pipe rotation and ovality. Research results indicate that pilot bore and in situ pipe profiles agree well, pipe buoyancy forces are small, drilling practice and fluid flow characteristics influence the slurry composition, well-designed drilling fluids provide bore support during and for extended periods following installation, significant voids are not created within the bore, slurry consolidates to a density similar to the surrounding soil (when the bore is located above the groundwater table), pipe torsion loading is inferred to be low, and pipe ovality is less than specified long-term deflection limits.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“A comprehensive survey on the state of horizontal directional drilling in North America provides an inside look at this increasingly growing industry.” (1999). Directional Drilling, 7(1), 20.
2.
Basic drilling fluids workshop manual. (1999). Baroid Industrial Drilling Products, Houston, Tex.
3.
Chevron Chemical Co. ( 1999). “Technical note No. 1 horizontal directional drilling (guided boring) with PLEXCO pipe.”
4.
Darley, H. C., and Gray, G. R. ( 1988). Composition and properties of drilling and completion fluids, 5th Ed., Gulf Publishing Co., Houston, Tex.
5.
Directional Drilling, 7(3), 46.
6.
Underground Constr., 56(3), 50.
7.
Gelinas, M. M. ( 1998a). “Strain in high-density polyethylene pipe as a result of installation using horizontal directional drilling.” Proc., No-Dig '98 Conf., North America Society of Trenchless Technology, Arlington, Va., 57–78.
8.
Gelinas, M. M. ( 1998b). “Field monitoring and analysis of high density polyethylene pipe installed using horizontal directional drilling.” MASc thesis, Dept. of Civ. Engrg., University of Waterloo, Waterloo, Ont., Canada.
9.
Khan, S., Bennett, D., McCrary, S., and Iseley, T. ( 1994). “Mini-horizontal directional drilling: State-of-the-art review.” Trenchless Technol. Ctr., Louisiana Tech University, Ruston, La.
10.
Kirby, M., Kramer, S. R., Pittard, G. T., and Mamoun, M. ( 1996). “Design guidelines and procedures for guided horizontal drilling.” Proc., 1996 Int. No-Dig Conf., North America Society of Trenchless Technology, Arlington, Va.
11.
Moodle, P. M. ( 1983). “Surficial geology of the north campus of the University of Waterloo.” BSc thesis, Dept. of Earth Sci., University of Waterloo, Waterloo, Ont., Canada.
12.
Plastic Pipe Institute (PPI). ( 2000). “Polyethylene pipe for horizontal directional drilling.” Washington, D.C.
13.
Polak, M. A., Gelinas, M., McKim, R., and Knight, M. A. ( 1999). “Analysis of strain data from field tests on high density polyethylene pipes installed using horizontal directional drilling.” Proc., No-Dig 1999 Conf., North America Society of Trenchless Technology, Arlington, Va., 15–28.
14.
Stangle, G. A. ( 1990). “Historical development of mini-directional horizontal boring methods.” Proc., Microtunnelling and Horizontal Directional Drilling Symp., Trenchless Technol. Ctr., Louisiana Tech University, Ruston, La.
Information & Authors
Information
Published In
History
Received: Nov 6, 2000
Published online: Sep 1, 2001
Published in print: Sep 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.