Effect of Temperature on the Setting Behavior of Concrete
Publication: Journal of Materials in Civil Engineering
Volume 22, Issue 3
Abstract
The effects of fluctuating temperatures on the setting times of concrete mixtures made with different water-to-cement ratios, supplementary cementing materials (SCMs), and SCM dosages are evaluated in this paper. Initial and final set times of the concrete were determined with penetration resistance testing. Wet-sieved mortar samples were placed in hot and cold water baths that cycled over 24 h between temperature ranges of 32– and 4– , respectively. The control samples were cured at temperatures between 20 and . Results show that Class F fly ash will slightly retard setting, ground granulated blast furnace slag will slightly accelerate setting, and Class C fly ash will significantly increase setting times. It is shown that the equivalent age maturity method may be used to estimate setting times of concrete samples cured under fluctuating temperatures. Activation energy values are recommended for use with the equivalent age maturity method to predict setting.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Funding for this study was provided by the Alabama DOT (ALDOT). The funding, cooperation, and assistance of ALDOT are gratefully acknowledged, particularly the guidance provided by Larry Lockett and Sergio Rodriguez. The contents of this paper reflect the views of the writers who are responsible for the facts and accuracy of the data presented. The contents do not necessarily reflect the official views or policies of ALDOT.
References
ASTM. (1999). “Standard test method for time of setting of concrete mixtures by penetration resistance.” C 403, West Conshohocken, Pa.
ASTM. (2004). “Standard practice for estimating concrete strength by the maturity method.” C 1074, West Conshohocken, Pa.
Carino, N. J. (1991). “The maturity method.” CRC handbook on nondestructive testing of concrete, Chapter 5, V. M. Malhotra and N. J. Carino, eds., CRC, Boca Raton, Fla., 101–146.
Eren, O., Brooks, J. J., and Celik, T. (1995). “Setting times of fly ash and slag cement concretes as affected by curing temperatures.” Cem., Concr., Aggregates, 17(1), 11–17.
Neville, A. M. (1996). Properties of concrete, 4th Ed., Wiley, New York.
Pinto, R. C. A., and Hover, K. C. (1999). “Application of maturity approach to setting times.” ACI Mater. J., 96(6), 686–691.
Schindler, A. K. (2004). “Prediction of concrete setting.” Proc., RILEM Int'l Symposium on Advances in Concrete through Science and Engineering, RILEM Publications SARL, Evanston, Ill.
Tuthill, L. H., and Cordon, W. A. (1955). “Properties and uses of initially retarded concrete.” Proceedings of the American Concrete Institute, 52(2), 273–286.
Yu, H. T., Khazanovich, L., Darter, M. I., and Ardani, A. (1998). “Analysis of concrete pavement responses to temperature and wheel loads measured from instrumented slabs.” Transp. Res. Rec., 1639, 94–101.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Aug 6, 2007
Accepted: Oct 23, 2009
Published online: Feb 12, 2010
Published in print: Mar 2010
Notes
Note. Associate Editor: Carl Liu
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.