Fuzzy Time-Dependent Reliability Analysis of RC Beams Subject to Pitting Corrosion
Publication: Journal of Materials in Civil Engineering
Volume 20, Issue 9
Abstract
Steel bars pitting corrosion is an electrochemical process that could seriously jeopardize the reliability of reinforced concrete structures. Even if detailed models exist to predict the lifetime of the concrete element when it is subject to this environmental attack, their applications present serious limitations that undergo, to the noteworthy sources of, uncertainty of many problem parameters. This restriction could produce erroneous solutions, especially when analysis deals with existing buildings or little information about problem parameters are accessible. In detail this takes place when real environmental conditions, mechanical properties as well as load conditions, could only be estimated and not known with enough accuracy. To overcome this problem, some methodologies have been developed, assuming that uncertainty variables can be suitably modeled in a probabilistic way, and therefore traditional theories for reliability assessment can be used. Nonetheless, in the analysis of this problem, there are other parameters that cannot be treated opportunely in a probabilistic way. The main purpose of this paper is to develop an efficient alternative approach for time-dependent reliability analysis regarding reinforced concrete beams subject to pitting corrosion, when probabilistic and nonprobabilistic parameters occur at the same time. With this new approach, it is possible to obtain a versatile tool to support the decision maker in planning maintenance interventions.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Present work has been developed by the triennial research project “DPC/RELUIS 2005/2008, Linea 2—MND.”
References
Apostolopoulos, C. A., and Koutsoukos, P. G. (2008). “Study of the corrosion of reinforcement in concrete elements used for the repair of monuments.” Constr. Build. Mater., 22(7), 1583–1593.
Beeby, A. W. (1983). “Cracking, cover and corrosion of reinforcement.” Concr. Int.: Des. Constr., 5(2), 35–40.
Chakraborty, S., and Sam, P. C. (2007). “Probabilistic safety analysis of structures under hybrid uncertainty.” Int. J. Numer. Methods Eng., 70(4), 405–422.
De Luca, A., and Termini, S. (1972). “A definition of non probabilistic entropy in the setting of fuzzy sets theory.” Inf. Control., 20(4), 301–312.
Du, Y. G., Clark, L. A., and Chan, A. H. C. (2005). “Residual capacity of corroded reinforcing bars.” Mag. Concrete Res., 57(3), 135–147.
Duprat, F. (2007). “Reliability of RC beams under chloride-ingress.” Constr. Build. Mater., 21(8), 1605–1616.
Elishakoff, I., and Ferracuti, B. (2006a). “Four alternative definitions of the fuzzy safety factor.” J. Aerosp. Eng., 19(4), 281–287.
Elishakoff, I., and Ferracuti, B. (2006b). “Fuzzy sets based interpretation of the safety factor.” Fuzzy Sets Syst., 157(18), 2495–2512.
Elsener, B. (2005). “Corrosion rate of steel in concrete-measurements beyond the Tafel law.” Corros. Sci., 47(12), 3019–3033.
Engelund, S., Sorensen, J. D., and Krenk, S. (1995). “Estimation of the time to initiation of corrosion in existing uncracked concrete structures.” Proc., Application of Statistics and Probability ICASP7, M. Lemaire, J. L. Favre, and A. Mébarki, eds., Balkema, Rotterdam, 501–506.
Enright, M. P., and Frangopol, D. M. (1998). “Probabilistic analysis of resistance degradation of reinforced concrete bridge beams under corrosion.” Eng. Struct., 20(11), 960–971.
Eurocode 2. (2004). “Design of concrete structures—Part 1.1: General rules and rules for buildings.” EN 1992-1-1:2004, Brussels.
Gonzalez, J. A., Andrade, C., Alonso, C., and Feliu, S. (1995). “Comparison of rates of general corrosion and maximum pitting penetration on concrete embedded steel reinforcement.” Cem. Concr. Res., 25(2), 257–264.
Haldar, A., and Reddy, R. K. (1992). “A random-fuzzy analysis of existing structures.” Fuzzy Sets Syst., 48(2), 201–210.
Hoffman, P. C., and Weyers, R. E. (1994). “Predicting critical chloride levels in concrete bridge decks.” G. I. Shuëller, M. Shinozuka, and J. T. P. Yao, eds., Proc., Structural Safety & Reliability, ICOSSAR ’93, Balkema, Rotterdam, The Netherlands, 957–959.
Kirkpatrick, T. J., Weyers, R. E., Sprinkel, M. M., and Anderson-Cook, C. M. (2002). “Impact specification changes on chloride-induce corrosion service life of bridge decks.” Cem. Concr. Res., 32(8), 1189–1197.
Klir, G. J. (2006). Uncertainty and information—Foundation of generalized information theory, Wiley, New York, 303–305.
Klir, G. J., and Yuan, B. (1995). Fuzzy sets and fuzzy logic—Theory and applications, Prentice-Hall, Englewood Cliffs, N.J., 280–290.
Leira, J. B., and Lindgård, J. (2000). “Statistical analysis of laboratory test data for service life prediction of concrete subjected to chloride ingress.” Proc., Application of Statistics and Probability ICASP8, R. E. Melchers, ed., 291–296.
Möller, B., Beer, M., Graf, W., and Sickert, J. U. (2006). “Time-dependent reliability of textile-strengthened RC structures under consideration of fuzzy randomness.” Comput. Struct., 84(8–9), 585–603.
Shrestha, B., and Duckstein, L. (1998). “A fuzzy reliability measure for engineering applications.” Uncertainty modelling and analysis in civil engineering, B. M. Ayyub, ed., CRC Press LLC, Boca Raton, Fla., 121–135.
Stewart, M. G. (2004). “Spatial variability of pitting corrosion and its influence on structural fragility and reliability of RC beams in flexure.” Struct. Safety, 26(4), 453–470.
Stewart, M. G., and Al-Harthy, A. (2008). “Pitting corrosion and structural reliability of corroding RC structures: Experimental data and probabilistic analysis.” Reliab. Eng. Syst. Saf., 93(3), 373–382.
Stewart, M. G., and Mullard, J. A. (2007). “Spatial time-dependent reliability analysis of corrosion damage and the timing of first repair for RC structures.” Eng. Struct., 29(7), 1457–1464.
Stewart, M. G., and Rosowsky, D. V. (1998). “Time-dependent reliability of deteriorating reinforced concrete bridge decks.” Struct. Safety, 20(1), 91–109.
Tuutti, K. (1982). “Corrosion of steel in concrete.” Fo. 4.82, Swedish Cement and Concrete Research Institute, Stockholm, Sweden.
Val, D. V., and Melchers, R. E. (1997). “Reliability of deteriorating RC slab bridges.” J. Struct. Eng., 123(12), 1638–1644.
Val, D. V., Stewart, M. G., and Melchers, R. E. (1998). “Effect of reinforcement corrosion on reliability of highway bridges.” Eng. Struct., 20(11), 1010–1019.
Vu, K. A. T., and Stewart, M. G. (2000). “Structural reliability of concrete bridges including improved chloride-induced corrosion models.” Struct. Safety, 22(4), 313–333.
Wallbank, E. J. (1989). The performance of concrete in bridges: A survey of 200 highway bridges, Mansell & Partners, eds., HSMO, Department of Transport, London.
Zadeh, L. A. (1965). “Fuzzy sets.” Inf. Control, 8(3), 338–353.
Zhenyu, L., and Qiu, C. (2002). “A new approach to fuzzy finite element analysis.” Comput. Methods Appl. Mech. Eng., 191(45), 5113–5118.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Sep 11, 2007
Accepted: Jan 28, 2008
Published online: Sep 1, 2008
Published in print: Sep 2008
Notes
Note. Associate Editor: Clarissa F. Ferraris
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.