Compression Tests of Circular Timber Column Confined with Carbon Fibers Using Inorganic Matrix
Publication: Journal of Materials in Civil Engineering
Volume 19, Issue 2
Abstract
Many engineering wooden components in our nation’s infrastructure are deteriorating and are in need of repair and strengthening. Timber piles, timber poles, timber posts, and naval fender systems are examples of timber infrastructure elements that are experiencing significant deterioration due to moisture, extreme temperatures, and weathering and are in need of repair and upgrade. The use of fiber-reinforced polymer composites (FRPC) has proven to be effective in rehabilitating and upgrading infrastructure elements. FRPC are also now being considered for new structures to improve strength, ductility, predictability, and durability. This note describes an experimental investigation of circular columns made of poplar wood confined with carbon fibers in an inorganic matrix and subjected to axial compression. Results from this study showed that carbon fiber confinement increased strength, stiffness, ductility, and reduced the variability in timber column behavior under axial loads. The study showed that the full fiber wrap and full fabric wrap confinement were more effective than spirals and hoops and will make the timber column behavior much more reliable and provide protective coating.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Concrete Institute (ACI). (2002). “State-of-the-art report on fiber reinforced plastic (FRP) reinforcement for concrete structures.” ACI 440R-96, reapproved 2002, Detroit.
Balaguru, P., Kurtz, S., and Rudolph, J. (1996). “Geopolymer for repair and rehabilitation of reinforced concrete beams.” Civil Engineering Rep. No. 96-14, Vol. 19, Rutgers, State Univ. of New Jersey, Piscataway, N.J., 35–42.
Chidiaq, R. (2003). “Axial compression of rounded wood poles reinforced with carbon fibers.” MSc Special Project, Dept. of Civil Engineering, Rutgers, State Univ. of New Jersey, Piscataway, N.J.
Davalos, J. F., Zipfel, M. G., and Qiao, P. (1999). “Feasibility study of prototype GFRP-reinforced wood railroad crosstie.” J. Compos. Constr., 3(2), 92–99.
Davidovits, J. (1991). “Geopolymers: Inorganic polymeric new materials.” J. Therm. Anal., 37(8), 1633–1756.
Demers, M., and Neale, K. W. (1999). “Confinement or reinforced concrete columns with fiber-reinforced composite sheets—An experimental study.” Can. J. Civ. Eng., 26, 226–241.
Emerson, R. N. (2004). “In situ repair technique for decayed timber piles.” Proc., 2004 Structures Congress (ASCE/SEI), G. Blandford, ed., Nashville, Tenn., 1–9.
Foden, A. J. (1999). “Mechanical properties and material characterization of polysialate structural composites.” Ph.D. dissertation, Dept. of Civil Engineering, Rutgers, State Univ. of New Jersey, Piscataway, N.J.
Kurtz, S., and Balaguru, P. (2001). “Comparison of inorganic and organic matrices for strengthening of RC beams with carbon sheets.” J. Struct. Eng., 127(1), 35–42.
Lyon, R. E., Balaguru, P., Foden, A. J., Sorathia, U., and Davidovits, J. (1997). “Fire resistant aluminosilicate composites.” Fire Mater., 21(2), 61–73.
Nanni, A., Norris, M. S., and Bradford, N. M. (1993). “Lateral confinement of concrete using FRP reinforcement.” ACI Special Publication No. SP138-13, Detroit, 193–209.
Purba, B., and Mufti, A. (1999). “Investigation of the behavior of circular concrete columns reinforced with carbon fiber reinforced polymers (CFRP) jackets.” Can. J. Civ. Eng., 26, 590–596.
Toutanji, H., and Balaguru, P. (1998). “Durability characteristics of concrete columns wrapped with fiber tow sheets.” J. Mater. Civ. Eng., 10(1), 52–57.
U.S. Forest Products Laboratory. (1999). Wood handbook, U.S. Dept. of Agriculture Forest Service, Madison, Wis.
Verhulst, S. M., Fuentes, L., Jirsa, J., Fowler, D., Wheat, H., and Moon, T. (2001). “Evaluation and performance monitoring of corrosion protection by fiber-reinforced composite wrapping.” Rep. No. 1774-1, Texas Dept. of Transportation, Austin, Tex.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Feb 8, 2005
Accepted: Dec 29, 2005
Published online: Feb 1, 2007
Published in print: Feb 2007
Notes
Note. Associate Editor: Houssam A. Toutanji
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.