Using Crushed Clay Brick as Coarse Aggregate in Concrete
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Materials in Civil Engineering
Volume 18, Issue 4
Abstract
This paper provides the results of an experimental investigation into the use of crushed new clay brick as coarse aggregate in producing concrete. The present investigation is the first phase of a two-phase program to study the effects of using recycled masonry aggregate (predominately made of clay brick) with its impurities on the properties of fresh and hardened concrete. Four different types of new clay bricks with different compressive strengths were used in the investigation. Several physical and mechanical properties of fresh and hardened concrete produced from crushed clay brick aggregates were determined and compared to concrete produced using granite as a proven aggregate.
Get full access to this article
View all available purchase options and get full access to this article.
References
Akhtaruzzaman, A. A., and Hasnat, A. (1983). “Properties of concrete using crushed brick as aggregate.” ACI Concrete Inter. J., 5(2), 58–63.
ASTM. (1994). “Specification for Portland cement.” ASTM C 150, West Conshohocken, Pa.
British Standards Institution (BSI). (1982). “Concrete admixtures: Specification for accelerating admixtures. Retarding admixtures and water reducing admixtures.” BS 5075: Part 1, London.
British Standards Institution (BSI). (1983a). “Testing concrete: Method for determination of slump.” BS 1881: Part 102, London.
British Standards Institution (BSI). (1983b). “Testing concrete: Method for determination of Vebe time.” BS 1881: Part 104, London.
British Standards Institution (BSI). (1983c). “Testing concrete: Method for determination of air content of fresh concrete.” BS 1881: Part 106, London.
British Standards Institution (BSI). (1983d). “Testing concrete: Method for making test cubes from fresh concrete.” BS 1881: Part 108, London.
British Standards Institution (BSI). (1983e). “Testing concrete: Method for making test beams from fresh concrete.” BS 1881: Part 109, London.
British Standards Institution (BSI). (1983f). “Testing concrete: Methods for determination of density of hardened concrete.” BS 1881: Part 114, London.
British Standards Institution (BSI). (1983g). “Method for determination of compressive strength of concrete cubes.” BS 1881: Part 116, London.
British Standards Institution (BSI). (1983h). “Testing concrete: Method for determination of flexural strength.” BS 1881: Part 118, London.
British Standards Institution (BSI). (1983i). “Testing concrete: Method for determination of compressive strength using portions of beams broken in flexure. Equivalent cube method.” BS 1881: Part 119, London.
British Standards Institution (BSI). (1985a). “Testing aggregates: Method for determination of particle size distribution, sieve tests.” BS 812: Part 103.1, London.
British Standards Institution (BSI). (1985b). “Specification for clay bricks.” BS 3921, London.
British Standards Institution (BSI). (1985c). “Concrete admixtures: Specification for superplasticizing admixtures.” BS 5075: Part 3, London.
British Standards Institution (BSI). (1990). “Testing aggregates: Method for determination of aggregate impact value (AIV).” BS 812: Part 112, London.
British Standards Institution (BSI). (1992). “Specification for aggregates from natural sources for concrete.” BS 882, London.
British Standards Institution (BSI). (1995). “Testing aggregates: Methods for determination of density.” BS 812: Part 2, London.
British Standards Institution (BSI). (2000a). “Cement: Composition, specifications and conformity criteria for common cements.” BS EN 197: Part 1, London.
British Standards Institution (BSI). (2000b). “Cement: Composition evaluation.” BS EN 197: Part 2, London.
Buck, A. D. (1977). “Recycled concrete as a source of aggregate.” ACI J., 74(5), 212–219.
Building Research Establishment (BRE). (1992). Design of normal concrete mixes, U.K. Dept. of the Environment, London.
Collins, R. J., and Sherwood, P. T. (1995). “Use of waste and recycled materials as aggregates: Specifications and standards.” Dept. of the Environment Rep., HMSO, London.
de Vries, P. (1993). “Concrete re-cycled: Crushed concrete as aggregate.” Concrete, 27(3), 9–13.
Hansen, T. C. (1992). Recycling of demolished concrete and masonry, E&FN Spon, London.
Khalaf, F. M., and De Venny, A. S. (2002). “New tests for porosity and water absorption of fired clay bricks.” J. Mater. Civ. Eng., 14(4), 334–337.
Khalaf, F. M., and De Venny, A. S. (2004). “Recycling of demolished masonry rubble as coarse aggregate in concrete: Review.” J. Mater. Civ. Eng., 16(4), 331–340.
Khaloo, A. R. (1994). “Properties of concrete using crushed clinker brick as coarse aggregate.” ACI J., 91(2), 401–407.
Neville, A. M. (1993). Properties of concrete, 3rd Ed., Longman, London.
Watson, K. (1993). “Rocky road to recycling.” Surveyor, 180(5253), 17–18.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Jul 1, 2004
Accepted: Aug 10, 2005
Published online: Aug 1, 2006
Published in print: Aug 2006
Notes
Note. Associate Editor: Kamran M. Nemati
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.