Geotechnical Characterization of Some Indian Fly Ashes
Publication: Journal of Materials in Civil Engineering
Volume 17, Issue 5
Abstract
This paper reports the findings of experimental studies with regard to some common engineering properties (e.g., grain size, specific gravity, compaction characteristics, and unconfined compression strength) of both low and high calcium fly ashes, to evaluate their suitability as embankment materials and reclamation fills. In addition, morphology, chemistry, and mineralogy of fly ashes are studied using scanning electron microscope, electron dispersive x-ray analyzer, x-ray diffractometer, and infrared absorption spectroscopy. In high calcium fly ash, mineralogical and chemical differences are observed for particles, and the particles of size. The mode and duration of curing significantly affect the strength and stress–strain behavior of fly ashes. The geotechnical properties of fly ash are governed by factors like lime content (CaO), iron content and loss on ignition. The distinct difference between self-hardening and pozzolanic reactivity has been emphasized.
Get full access to this article
View all available purchase options and get full access to this article.
References
Brinks, R. H., and Halstead, W. J. (1956). “Studies related to the testing of fly ash for use in concrete.” Proc., American Society of Testing Materials, 56, 1161–1206.
Carette, G. G., and Malhotra, V. M. (1987). “Characterization of Canadian fly ash and their relative performance in concrete.” Can. J. Civ. Eng., 14(5), 667–682.
Charlie, W. A. (1977). “Pulp and paper mill solid waste disposal: A review.” Proc., Geotechnical Practice for Disposal of Solid Waste Material, ASCE, New York, 71–86.
Cokca, E. (2001). “Use of class C fly ashes for the stabilization of an expansive soil.” J. Geotech. Geoenviron. Eng., 127(7), 568–573.
Demirbas, A., Karshoglu, S., and Ayas, A. (1995). “Utilization of lignite ash in concrete mixture.” Cem. Concr. Res., 25(8), 1610–1614.
Diamond, S. (1986). “Particle morphologies in fly ash.” Cem. Concr. Res., 16(4), 569–579.
DiGioia, A. M., and Nuzzo, W. L. (1972). “Fly ash as structural fill.” J. Power Div. (Am. Soc. Civ. Eng.), 98(1), 77–92.
Edil, T. B., Benson, C. H., Bin-Shafique, S, Tanyu, B. F., Kim, W, and Senol, A. (2002). “Field evaluation of construction alternatives for roadway over soft subgrade.” Transportation Research Board, Paper No. 02-3808, Washington, D.C., 1–30.
Erdogdu, K., and Turker, P. (1998). “Effects of fly ash particle size on strength of portland cement fly ash mortars.” Cem. Concr. Res., 28(9), 1217–1222.
Fisher, G. L., and Natusch, D. F. S. (1979). “Size dependence of the physical and chemical properties of fly ash.” Analytical methods for coal by products, Vol-III, Clarence Karr, Jr., ed., Academy, New York, 489–539.
Han, D. (1996). “Use of potential of fly ash-residual soil mixture as a dyke material.” Proc., 2nd Int. Congress on Environmental Geotechnics, Osaka, Japan, A.A. Balkema, Rotterdam, The Netherlands, Vol. 2, 721–726.
Hubbard, F. H., Dhir, R. K., and Ellis, M. S. (1985). “Pulverized fuel ash for concrete; compositional characterization of United Kingdom PFA.” Cem. Concr. Res., 15(7), 185–198.
Indraratna, B., Nautalaya, P., Koo, K. S., and Kuganethira, N. (1991). “Engineering behavior of a low carbon, pozzolanic fly ash and its potential as a construction fill.” Can. Geotech. J., 28(4), 542–555.
Joshi, R. C., and Lohtia, R. P. (1997). Fly ash in concrete, production, properties and uses, Vol. 2, Gordon and Breach Science, Amsterdam, The Netherlands.
Kaniraj, S. R., and Havanagi, V. G. (2001). “Correlation analysis of laboratory compaction of fly ashes.” Pract. Period. Hazard., Toxic, Radioact. Waste Manage., 5(1), 25–32.
Kaniraj, S. R., and Havanagi, V. G. (1999). “Geotechnical characteristics of fly ash-soil mixtures.” Geotech. Eng., 30(2), 129–147.
Koo, K. S. (1991). “Mineralogical and engineering characteristics of low carbon pozzolanic fly ash.” ME thesis, AIT, Bangkok.
Laguros, J. G. (2002). “Discussion of ‘Use of class C’ fly ash stabilization of an expansive soil.” J. Geotech. Geoenviron. Eng., 128(11), 965–966.
Lawton, E. C. (2001). “Non grouting technique.” Practical Engineering Handbook, R. W. Brown, ed., McGraw-Hill, New York.
Lee, S. H., Sakai, E., Damien, M., and Bang, W. K. (1999). “Characteristics of fly ash directly collected from electrostatic precipitator.” Cem. Concr. Res., 29(11), 1791–1797.
Leonard, G. A., and Bailey, B. (1982). “Pulverized coal ash as structural fill.” J. Geotech. Eng. Div., Am. Soc. Civ. Eng., 108(4), 517–531.
Luxan, M. P., Rojas S., and Frias, M. (1989). “Investigation of the fly ash calcium hydroxide reactions.” Cem. Concr. Res., 19(1), 69–80.
Moller, B., and Nilson, G. (1985). “Technical properties of waster products from coal combustion—A laboratory study in accordance with soil analysis procedures.” Proc., XI Int. Conf. on Soil Mechanics and Foundation Engineering, San Francisco, 1271–1274.
Nishikawa, J., Sato, A., and Amano, K. (2002). “Utilisation of coal ash as fill material.” Proc., 4th Int. Congress on Environmental Geotechnics, Rio De Janerio, Brazil, A.A. Balkema, Rotterdam, The Netherlands, Vol. 1. 615–618.
Pandian, N. S., Krishna, K. C., and Leelavathamma, B. (2002). “Effect of fly ash on the CBR behavior of soils.” Proc., Indian Geotechnical Conference, Allahabad, India, 183–186.
Pandian, N. S., Rajasekhar, C., and Sridharan, A. (1998). “Studies of the specific gravity of some Indian coal ashes.” J. Test. Eval., 26(3), 177–186.
Porbaha, A., Pradhan, T. B. S., and Yamane, N. (2000) “Time effect on shear strength and permeability of fly ash.” J. Energy Eng., 126(1), 15–31.
Raymond, S. (1961). “Pulverized fuel ash as embankment material.” Proc.-Inst. Civ. Eng., Paper No. 6538, 515–536.
Sridharan, A. (2002). “Characterization of Indian coal ashes for geotechnical application.” Proc., Indian Geotechnical Conference, Allahabad, India, 700–712.
Toth, P. S., Chan, H. T., and Cragg, C. B. (1988). “Coal ash as a structural fill with specific reference to Ontario experience.” Can. Geotech. J., 25(4), 694–704.
van Roode, M., Esther, D., and Hemmings, R. T. (1987). “X-ray diffraction measurement of glass content in fly ash and slags.” Cem. Concr. Res., 17(2) 183–197.
Watt, J. D., and Thorne, D. J. (1965). “Composition and pozzolanic properties of pulverized fuel ashes. I. Composition of fly ashes from some British power stations and properties of their component particles.” J. Appl. Chem., 15, 585–594.
Winter, M. G., and Clarke, B. G. (2002). “Improved use of pulverized fuel ash as general fill.” Proc. Inst. Civ. Eng., Geotech. Eng., 155(2), 1331–1341.
Yudhbir, and Das, S. K. (1996). “Fly ash as a construction material.” Proc., 2nd Int. Congress on Environmental Geotechnics, Osaka, Japan, A.A. Balkema, Rotterdam, The Netherlands, 2, 961–966.
Yudhbir, and Honjo, Y. (1991). “Application of geotechnical engineering to environmental control.” Proc., 9th Asian Regional Conf. on Soil Mechanics and Foundation Engineering, Bangkok, 2, 431–469.
Zia, N., and Fox, P. J. (2000). “Engineering properties of loess-fly ash mixture for road base construction.” Transport Research Record. 1714, Transportation Research Board, Washington, D.C., 49–56.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Jun 17, 2003
Accepted: Mar 5, 2004
Published online: Oct 1, 2005
Published in print: Oct 2005
Notes
Note. Associate Editor: Manoochehr Zoghi
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.