Ladle Furnace Slag in Construction
Publication: Journal of Materials in Civil Engineering
Volume 17, Issue 5
Abstract
Ladle furnace reducing slag is a common byproduct in steelmaking of carbon and low alloy steels. After air cooling and weathering over several days, this material is completely ground into fine white particles. Physical, chemical, and crystalline characterizations were performed in order to verify possibilities for its direct application as a construction material. Two ways are proposed for the immediate use of ladle furnace slag: masonry mortars and paving mixes for rural roads with low levels of traffic.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers acknowledge the Basque Country Government for financial support, in Research Project No. UNSPECIFIEDUE-99-7, and the Diputación Foral de Guipuzcoa for financial support, in Research Project: “Behavior of slag mixtures used in country roads, 2001.”
References
Bagampadde, U., Al-Abdul Wahhab, H. I., and Aiban, S. A. (1999). “Optimization of steel slag aggregates for bituminous mixes in Saudi Arabia.” J. Mater. Civ. Eng., 11(1), 30–35.
Comeau, Y. (2001). “Épuration des eaux du Biodôme.” Forum Univ. Montreal, 35(22), 12–16.
Drissen, P., and Art, K. J. (2000). “Entstehung feinkörniger Pfannenschlacken.” Rep. Forschungsinstituts, FEHS, Duisburg, Germany, 7(1), 12–16.
Geiseler, J. (1996). “Use of steelworks slag in Europe.” Waste Manage. Res., 16(1–3), 59–63.
Geyer, R. T., Dal Molin, D., and Vilella, A. C. F. (2001). “Evaluation of the durability of the reinforced concrete with electric arc furnace addition.” Congresso Annual Associacao Brasileira de Metalurgia e Materiais, 56, 127–136.
Jones, N. C. (2001). “The successful use of EAF slag in asphalt.” Proc., 2nd European Slag Conf., Düsseldorf, Germany, Euroslag, Vol. 1, 123–135.
Kanagawa, A., and Kuwayama, T. (1997). “The improvement of soft clayey soil utilizing reducing slag produced from electric arc furnace.” Denki Seiko, 68(4), 261–267.
Kojimori, M., Nemoto, K., Fukuokaya, T., Uchida, S., Matumoto, H., and Mori, T. (2003). “Construction of new slag granulating equipment.” Denki Seiko, 74(1), 55–59.
Manso, J. M. (2001). “Fabricación de hormigón hidráulico con escorias de horno eléctrico de arco.” PhD Engineering thesis, Univ. of Burgos, Burgos, Spain.
Motz, H., and Geiseler, J. (2001). “Products of steel slags: An opportunity to save natural resources.” Waste Manage. Res., 21, 285–293.
Portland Cement Association. (1992). Soil–cement laboratory handbook, Stokie, Ill.
San José, J. T., and Uría, A. (2000). “Escorias de horno de arco eléctrico en mezclas bituminosas.” Arte Cemento, 1905, 122–125.
Shelburne, W. M., and DeGroot, D. J. (1998). “The use of waste and recycled materials in highway construction.” Civ. Eng. Pract., 13(1), 5–16.
Shi, C. (2002). “Characteristics and cementitious properties of ladle slag fines from steel production.” Cem. Concr. Res., 32(3), 459–462.
Shinkai, M., Tsuno, M., and Ogawa, N. (1997). “Used-refractories recycle technology in melting shop.” Denki Seiko, 68(4), 295–299.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Feb 23, 2004
Accepted: Aug 9, 2004
Published online: Oct 1, 2005
Published in print: Oct 2005
Notes
Note. Associate Editor: Shin-Che Huang
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.