Evaluation of Open-Graded Friction Course Mixtures Containing Cellulose Fibers and Styrene Butadiene Rubber Polymer
Publication: Journal of Materials in Civil Engineering
Volume 17, Issue 4
Abstract
Open-graded friction course (OGFC) or porous mixtures consist of an open gradation, mostly of coarse size aggregate with little fines. The benefits of an OGFC mixture are typically increased surface permeability, noise reduction, and enhanced surface friction, especially in wet weather. This paper presents the results of a study investigating four different OGFC mixes containing no additives, cellulose fibers, styrene butadiene rubber (SBR) polymer, and a combination of both fibers and SBR polymer. Mix designs were performed according to the design procedure proposed by the National Center of Asphalt Technology for a range of 4.5–6.5% asphalt content. The mixture containing fibers and SBR polymer was selected as an acceptable mix design with an optimum asphalt content of 6.5%. The moisture susceptibility of the selected mix at optimum asphalt content was evaluated. Results were compared with that for a dense mix.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers gratefully acknowledge the financial support provided by Sultan Qaboos University, and the cooperation and assistance of the technical staff of the Civil and Architectural Engineering Department.
References
Cooley, L. A., Jr., Brown, E. R., and Watson, D. E. (2000). “Evaluation of OGFC mixtures containing cellulose fibers.” Transportation Research Record. 1723, Transportation Research Board, Washington, D.C., 19–25.
Geistlinger, L. (1996). “Safety first: Open-graded friction courses.” Roads Bridges, 34(9), 26–32.
Hassan, H. F., and White, T. D. (1996). “Laboratory and field moisture conditions for flexible pavements.” Transportation Research Record. 1568, Transportation Research Board, Washington, D.C., 96–105.
Huber, G. (2000). “Performance survey on open-graded friction course mixes.” National Cooperative Highway Research Program, Synthesis of Highway Practice 284, Transportation Research Board, Washington, D.C.
Kandhal, P. S., and Mallick, R. B. (1998). “Open graded asphalt friction course: State of the practice.” Rep. No. 98-7, National Center of Asphalt Technology (NCAT), Auburn, Ala.
Kandhal, P. S., and Mallick, R. B. (1999). “Design of new-generation open-graded friction courses.” Rep. No. 99-3, National Center of Asphalt Technology (NCAT), Auburn, Ala.
National Asphalt Pavement Association (NAPA). (1994). “Guidelines for materials production and placement of stone mastic asphalt (SMA).” Information Series 118, Lanham, Md.
Page, G. C. (1993). “Open-graded friction courses: Florida’s experience.” Transportation Research Record. 1427, Transportation Research Board, Washington, D.C., 1–4.
Tappeiner, W. J. (1993). “Open-graded asphalt friction course.” Info Series 115, National Asphalt Pavement Association, Lanham, Md.
Watson, D., Johnson, A., and Jared, D. (1998). “Georgia DOT’s progress in open-graded friction course development.” Transportation Research Record. 1616, Transportation Research Board, Washington, D.C., 20–33.
Welleman, T. (1976). “Porous asphalt against water nuisance.” Proc., Int. Symp. on Porous Asphalt: S.C.W. Record 2, Study Center for Road Construction, Amsterdam, The Netherlands, 16–24.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Apr 15, 2003
Accepted: Sep 7, 2004
Published online: Aug 1, 2005
Published in print: Aug 2005
Notes
Note. Associate Editor: Jason Weiss
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.