Effect of Alloy Composition on Atmospheric Corrosion of Weathering Steel
Publication: Journal of Materials in Civil Engineering
Volume 17, Issue 2
Abstract
A reliable method of predicting the thickness loss of weathering steel due to corrosion is currently unavailable. Corrosion loss depends significantly on the service life of the structure, the corrosive nature of the environment, and the alloy content of the steel. Therefore, a prediction method accounting for these factors should be possible. Models showing the effects of five alloying elements (copper, nickel, chromium, silicon, and phosphorus) on thickness loss in three environments (rural, industrial, and marine) are provided in this paper based on a comprehensive database. The models result in correlation coefficients higher than 0.95. The effects of the alloying elements indicated by the models show that failure to properly account for the alloying elements can yield as much as 20% error in thickness loss. The model can be integrated with existing service life models to forecast a thickness loss estimate for a required design life.
Get full access to this article
View all available purchase options and get full access to this article.
References
Albrecht, P., Coburn, S. K., Wattar, F. M., Tinklenberg, G., and Gallagher, W. P. (1989). “Guidelines for the use of weathering steel in bridges.” NCHRP Rep. No. 314, Transportation Research Board, National Research Council, Washington, D.C.
Albrecht, P., and Hall, T. T. (2003). “Atmospheric corrosion resistance of structural steels.” J. Mater. Civ. Eng., 15(1), 2–24.
Albrecht, P., and Naeemi, A. (1984). “Performance of weathering steel in bridges.” NCHRP Rep. No. 272, Transportation Research Board, National Research Council, Washington, D.C.
Buck, D. M. (1919). “The influence of very low percentages of copper in retarding the corrosion of steel.” Proc., ASTM, 224–235.
Copson, H. R. (1960). “Long-time atmospheric corrosion tests on low-alloy steels.” Proc. ASTM, 650–666.
Komp, M. E., (1987). “Atmospheric corrosion ratings of weathering steels: calculation and significance.” Materials Performance, Paper No. 423, NACE, Corrosion/87, 22–44.
Larrabee, C. P., and Coburn, S. K. (1962). “The atmospheric corrosion of steel as influenced by changes in chemical composition.” Proc., 1st Int. Congress on Metallic Corrosion, Butterworth, London, 276–285.
Legault, R. A., and Leckie, H. P. (1974). “Effect of alloy composition on the atmospheric corrosion behavior of steel based on a statistical analysis of the Larrabee-Coburn data set.” Corrosion in Natural Environments, ASTM STP 558, West Conshohocken, Pa., 334–347.
McCuen, R. H., and Albrecht, P. (1994). “Composite modeling of corrosion penetration data.” Application of accelerated corrosion tests to service life prediction of materials, ASTM STP 1194, Gustavo Cragnolino, ed., ASTM, West Conshohocken, Pa., 65–102.
Morcillo, M., Feliu, S., and Simancas, J. (1993). “Deviation from bi-logarithmic law for atmospheric corrosion of steel.” Br. Corros. J., London, 28(1), 50–52.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Jan 15, 2002
Accepted: Jul 20, 2004
Published online: Apr 1, 2005
Published in print: Apr 2005
Notes
Note. Associate Editor: David Trejo
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.