Effect of Bar Diameter on the Behavior of Lightly Reinforced Concrete Beams
Publication: Journal of Materials in Civil Engineering
Volume 17, Issue 1
Abstract
The transition from the uncracked to the cracked phase in lightly reinforced concrete beams was experimentally investigated by subjecting five full-scale beams to three-point bending. All beams had the same dimensions and the same percentage of flexural reinforcement, but varying diameters and number of reinforcing bars. By means of transducers, strain gauges, and geometric moiré, the crack profiles and the concrete strain field around the cracks were measured. In this way, it was possible to observe and to reproduce numerically the crack onset and its stable propagation up to the unstable behavior that follows the effective cracking moment. During the growth of the crack, the moment rotation diagrams, the values of tensile strains in concrete, and the shape of crack profiles demonstrate the dependence of the mechanical response on bar diameter. Consequently, to avoid brittle failure, the minimum reinforcement ratio for lightly reinforced concrete beams should likewise be a function of bar diameter.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers would like to express their gratitude to Professor Ivo Iori and Professor Paolo Vallini for their encouragement and useful suggestions.
References
American Concrete Institute (ACI). (1995). “Building code requirements for structural concrete.” ACI 318-95, Detroit.
Bažant, Z. P., and Cedolin, L. (1991). Stability of structures—elastic, inelastic, fracture, and damage theories, Oxford University Press, Oxford, U.K.
Bažant, Z. P., and Oh, B. H. (1983). “Crack band theory for fracture of concrete.” Mater. Constr. (Paris), 16, 155–177.
Bianchini, A. C., Kesler, C. E., and Lott, J. L. (1968). “Cracking of reinforced concrete under external load.” Causes, mechanism, and control of cracking in concrete, American Concrete Institute, Detroit, 73–85.
Bosco, C., and Carpinteri, A. (1992). “Softening and snap through behavior of reinforced elements.” J. Eng. Mech., 118(8), 1564–1577.
Bosco, C., Carpinteri, A., and Debernardi, P. G. (1990). “Fracture of reinforced concrete: scale effect and snap-back instability.” Eng. Fract. Mech., 35(4/5), 665–677.
Carpinteri, A. (1988). “Snap-back and hyperstrength in lightly reinforced concrete beams.” Mag. Concrete Res., 40(145), 209–215.
Cattaneo, S., and Rosati, G. (1999). “Effect of different boundary conditions in direct tensile tests: experimental results.” Mag. Concrete Res., 51(5), 365–374.
Comité Europeéen du Béton (CEB). (1958). CEB Bulletin d’Information No. 6, Lausanne, Switzerland.
Comitè Euro-International du Bèton (CEB). (1993). “CEB-FIP model code 1990.” CEB Bulletin d’Information No. 213/214, Lausanne, Switzerland.
Cossu, P., and Pozzo, E. (1990). “Experimental behavior and hyper-strength of slightly reinforced concrete members bent up to collapse.” Mater. Struct., 23, 204–212.
European Committee for Standardization. (2001). Eurocode 2: design of concrete structures. Part 1: General rules and rules for buildings, Brussels, Belgium.
Fantilli, A. P., Ferretti, D., Iori, I., and Vallini, P. (1998). “Behaviour of R/C elements in bending and tension: the problem of minimum reinforcement ratio.” Minimum reinforcement in concrete members, A. Carpinteri, ed., Elsevier, London, 99–125.
Giuriani, E., and Rosati, G. (1984). “Experimental investigation on RC elements subjected to a single crack. Analysis of the unstable branches of the moment-rotation relationship.” Studi e Ricerche, Corso di Perfezionamento per le Costruzioni in Cemento Armato F.lli Pesenti, Vol. 6, Politecnico di Milano, Milan, Italy, 151–200 (in Italian).
Kobayashi, A. S. (1993). Handbook on experimental mechanics, Society for Experimental Mechanics, Bethel, Conn.
Levi, F. (1985). “On minimum reinforcement in concrete structures.” J. Struct. Eng., 111(12), 2791–2796.
Levi, F., Bosco, C., and Debernardi, P. G. (1988). “Two aspects of the behavior for slightly reinforced structures.” CEB Bulletin d’Information No. 185, Comité Euro-International du Beton, Lausanne, Switzerland, 39–50.
Maldague, J. C. (1965). “Contribution a l’étude des déformations instantanées des poutres en béton armé.” Ann. Inst. Tech. Bat. Trav. Publics, 213, 1170–1218 (in French).
Nanni, A. (1991). “Pseudoductility of fiber reinforced concrete.” J. Mater. Civ. Eng., 3(1), 78–90.
Park, R., and Paulay, T. (1975). Reinforced concrete structures, Wiley, New York.
Planas, J., Ruiz, G., and Elices, M. (1995). “Fracture of lightly reinforced concrete beams: theory and experiments.” Proc. 2nd Int. Conf. on Fracture Mechanics, F. H. Wittmann, ed., AEDIFICATIO Publishers, Freiburg, Germany, 1179–1188.
Polak, M. A., and Killein, D. T. (1998). “The influence of the reinforcing bar diameter on the behavior of members in bending and in-plane tension.” ACI Struct. J., 95(5), 471–479.
Rokugo, K., Uchida, Y., and Koyanagi, W. (1992). “Flexural failure behavior of lightly reinforced concrete beams.” Proc., 1st Int. Conf. on Fracture Mechanics, Z. Bažant, ed., Elsevier, London, 775–781.
Romualdi, J. P., and Mandel, J. A. (1964). “Tensile strength of concrete affected by uniformly distributed and closely spaced short lengths of wire reinforcement.” J. Am. Concr. Inst., 61, 657–670.
Ruiz, G., Elices, M., and Planas, J. (1998). “Size effect and bond-slip dependence of lightly reinforced concrete beams.” Minimum reinforcement in concrete members, A. Carpinteri, ed., Elsevier, London, 67–97.
Saouma, V., and Ingraffea, A. R. (1981). “Fracture mechanics analysis of discrete cracking.” Proc., IABSE Colloquium on Advanced Mechanics of Reinforced Concrete, Delft University Press, Delft, The Netherlands, 34, 413–436.
Westergaard, H. M. (1933). “Stresses at a crack, size of the crack, and the bending of reinforced concrete.” J. Am. Concr. Inst., 5(2), 93–102.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 17 • Issue 1 • February 2005
Pages: 10 - 18
Copyright
© 2005 ASCE.
History
Received: Aug 25, 2003
Accepted: Nov 19, 2003
Published online: Feb 1, 2005
Published in print: Feb 2005
Notes
Note. Associate Editor: Nemkumar Banthia
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.