Permeable Porosity and Thermal Conductivity of Construction Materials
Publication: Journal of Materials in Civil Engineering
Volume 16, Issue 4
Abstract
Water permeable porosities and thermal conductivity of ceramic construction materials have been experimentally determined in this work. The samples were selected so as to obtain a wide variation in their apparent porosity. To study the influence of porosity on thermal conductivity, thermal conductivities of all the samples were measured in oven dried and water saturated conditions. A model relating porosity with thermal conductivity of these materials is proposed. In the model, two types of pores are hypothesized, namely; enclosed pores and enclosing pores. The three-dimensional steady-state heat transfer through unit cells containing each of the two types of pores, is solved to evaluate their effective thermal conductivity. By using the law of mixture for the random distribution of the type of pores, an equation combining the conductivities of the two cells is framed to get overall effective thermal conductivity of the material, in both dry and saturated states. The experimentally determined values of thermal conductivities reported in literature for some bricks are then compared with those predicted through this model.
Get full access to this article
View all available purchase options and get full access to this article.
References
Arnold, P. J.(1969). “Thermal conductivity of masonry material.” Building Research Station Current Paper 1/70, reprinted from J. Heat. Ventilation Eng., 37, 101–109.
American Society for Testing and Materials (ASTM). (1997). “Standard test method for density, absorption, and voids in hardened concrete.” C 642-97, West Conshohocken, Pa.
Bhattacharjee, B. (1990). “A study on the influence of void and moisture contents of some building materials on their thermal transport properties and implications on thermal performance of building envelope.” PhD thesis, Indian Institute of Technology, Delhi, India.
Brewer, H. W.(1967). “General relation of heat flow factors to unit weight of concrete.” J. Portland Cement Assoc. Res. Dev. Lab.,9(1), 48–60.
Campbell-Allen, D., and Thorne, C. P.(1963). “The thermal conductivity of concrete.” Mag. Concr. Res.,15(43), 39–48.
Chawla, O. P.(1972). “Regression correlation relating thermal conductivity, temperature, porosity and pore diameter of kaolin refractory bricks.” Climate Control,5, 41–43.
Clews, F. H. (1969). Heavy clay technology, Academic, London.
Deng, Y., Fedler, C. B., and Gregory, J. M.(1992). “Predictions of thermal characteristics for mixed porous media.” J. Mater. Civ. Eng., 4(2), 185–195.
Diamant, R. E. E. (1986). Thermal and acoustic insulation, Butterworth, London.
Diamond, S.(2000). “Mercury porosimetry—An inappropriate method for the measurement of pore size distributions in cement based materials (a review).” Cem. Concr. Res., 30(10), 1517–1525.
Gori, F. (1986). “On the theoretical prediction of the effective thermal conductivity of bricks.” Proc., 8th Heat Transfer Conf., [Heat transfer (II)], Hemisphere, New York, 627–632.
Guiffant, G., and Flaud, P.(1986). “Numerical model for the determination of effective thermal conductivity of composite materials.” Int. Commun. Heat Mass Transfer, 13(6), 675–685.
Harmathy, T. Z.(1970). “Thermal properties of concrete at elevated temperature.” J. Mater., 5, 47–74.
Jakob, M. (1959). Heat transfer (I), Wiley, New York.
Khan, M. I., and Bhattacharjee, B. (1999). “Influence of aggregate type, porosity, and nature of the pores on thermal conductivity of concrete.” Proc., Int. Conf. on Infrastructure Regeneration and Rehabilitation Improving the Quality of Life Through Better Construction, Univ. of Sheffield, Sheffield, U.K., 393–403.
Laskar, M. A. I., Kumar, R., and Bhattacharjee, B.(1997). “Some aspects of evaluation of concrete through mercury intrusion porosimetry.” Cem. Concr. Res., 27(1), 93–105.
Loudon, A. G.(1968). “U-values in the 1970 guide.” J. Heat. Ventilation Eng.,36, 167–174.
Luikov, A. V. (1980). Heat and mass transfer, Mir, Moscow.
Marcussen, L. (1985). “Mathematical models for effective thermal conductivity.” Thermal conductivity, (18), Plenum, New York, 588–598.
Marshall, A. L.(1972). “The thermal properties of concrete.” Build. Sci., 7, 167–174.
Pai, D. K., and Raghavan, V. R.(1982). “A thermal conductivity model for two phase media.” Lett. Heat Mass Transfer, 9, 21–27.
Paipetis, S. A. (1981). “Mathematical modeling of composites.” Development in composite material—2 stress analysis, G. S. Holister, eds., Applied Science, London, 1–37.
Prakouras, A. G., Vachon, R. J., Crane, R. A., and Khader, M. S.(1978). “Thermal conductivity of heterogeneous mixture.” Int. J. Heat Mass Transfer, 21, 1157–1166.
Pratt, A. W. (1982). Heat transmission in buildings, Wiley, Chichester.
Saxena, N. S., Chohan, M. A., and Gustafsson, S. E.(1986). “Effective thermal conductivity of loose granular materials.” J. Phys. D, 19, 1625–1630.
Wilson, A. (1974). “A computer efficient model for calculating the thermal conductivity of void-ridden materials.” Advances in Thermal Conductivity, Proc., 12th Int. Conf. On Thermal Conductivity, Ozark, Mo., R. L. Reisbig and H. J. Sauer, eds., University of Missouri-Rolla, Rolla, Mo., 370–376.
Zimmerman, R. W.(1989). “Thermal conductivity of fluid-saturated rocks.” J. Pet. Sci. Eng., 3, 219–227.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 16 • Issue 4 • August 2004
Pages: 322 - 330
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Sep 6, 2002
Accepted: Jun 17, 2003
Published online: Jul 15, 2004
Published in print: Aug 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.