Comparing Superpave Gyratory Compactor Data to Field Cores
Publication: Journal of Materials in Civil Engineering
Volume 16, Issue 1
Abstract
Achieving proper compaction of asphalt pavement is crucial to its longevity and acceptable performance. Laboratory compaction is an essential part of mix design. In order for the mix design process to be effective, laboratory compaction must adequately simulate field compaction. This study used mechanical properties measured with the Superpave shear tester to evaluate field compaction and laboratory compaction. The field compaction consisted of three test sections with different compaction patterns. The laboratory compaction used the Superpave gyratory compactor with adjustments to several parameters. Results of this study indicate that current gyratory protocol produces specimens with significantly different mechanical properties than field cores produced with the same material and compacted to the same air voids. Results also show that adjustments to certain parameters of the gyratory can produce specimens that better simulate the mechanical properties of pavement cores.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Association of State Highway and Transportation Officials (AASHTO). (1998). “Standard test method for determining the permanent deformation and fatigue cracking characteristics of hot mix asphalt (HMA) using the simple shear test (SST) device.” TP7 Provisional Standards, Washington, D.C.
American Association of State Highway and Transportation Officials (AASHTO). (1999). “Standard method for preparing and determining the density of hot mix asphalt (HMA) specimens by means of the SHRP gyratory compactor.” TP4 Provisional Standards, Washington, D.C.
American Society for Testing and Materials (ASTM). (1989). “Standard practice for preparation of test specimens of bituminous mixtures by means of gyratory shear compactor.” D 4013, West Conshohocken, Pa.
Anderson, R. M., Huber, G. A., Walker, D. E., and Zhang, X.(2000). “Mixture testing, analysis, and field performance of the pilot Superpave projects: The 1992 SPS-9 mixtures.” J. Assoc. Asphalt Paving Technol.,69, 177.
Blankenship, P. B., Mahboub, K. C., and Huber, G. A. (1994). “Rational method for laboratory compaction of hot-mix asphalt.” Transportation Research Record 1454, Transportation Research Board, Washington, D.C.
Harvey, J., Monismith, C., and Sousa, J.(1994). “An investigation offield- and laboratory-compacted asphalt-rubber, SMA, recycled and conventional asphalt-concrete mixes using SHRP A-003A equipment.” J. Assoc. Asphalt Paving Technol.,63, 511.
Mason, R. L., Gunst, R. F., and Hess, J. L. (1989). Statistical design and analysis of experiments, Wiley, New York.
Neter, J., Wasserman, W., and Kutner, M. H. (1990). Applied linear statistical models, 3rd Ed., Richard D. Irwin, Homewood, Ill.
Strategic Highway Research Program (SHRP). (1994). “Permanent deformation response of asphalt aggregate mixes.” Rep. No. SHRP-A-415, National Research Council, Univ. of California, Berkeley, Calif.
Von Quintus, H. L., Scherocman, J. A., Hughes, C. S., and Kennedy, T. W. (1991). “Asphalt-aggregate mixture analysis system (AAMAS).” National Cooperative Highway Research Program Rep. No. 338.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: May 10, 2002
Accepted: Apr 9, 2003
Published online: Jan 16, 2004
Published in print: Feb 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.