Risks of Cracking and Delamination in Patch Repair
Publication: Journal of Materials in Civil Engineering
Volume 14, Issue 4
Abstract
The durability of concrete repair may be measured in terms of its resistance to cracking and to ingress by aggressive species. This paper addresses the various issues that form the nucleus of cracking resistance, including the role of material parameter indices such as free drying shrinkage and specific tensile creep. Data for these indices are presented for two new generation repair materials, and attention is drawn to the inherent anomalies existing in international specifications for shrinkage measurement. The paper concludes by defining risk factors associated with the probability of failure of a patch repair in one of three identified modes. The risk factors are computed for a patch repair using a rigid substrate idealization, and the probability of failure in cracking, delamination, or peeling modes is assessed.
Get full access to this article
View all available purchase options and get full access to this article.
References
Asad, M., Baluch, M. H., and Al-Gadhib, A. H.(1997). “Drying shrinkage stresses in concrete patch repair systems.” Mag. Concrete Res., 49(181), 283–293.
Asad, M., Baluch, M. H., Al-Gadhib, A. H., Al-Amoudi, O. S. B., and Alghamdi, S. A. (1995). “Nonlinear finite element model for moisture diffusion in repair materials.” Proc., Joint ASCE (S. Arabia) and ASCE (Lebanon) Conf. on Saving the Environment, ASCE, Beirut, 2, 891–898.
Balogh, A. (1996). “New admixture combats concrete shrinkage.” Concrete Constr., 546–551.
Banthia, N., Yan, C., and Mindess, S.(1996). “Restrained shrinkage cracking in fiber reinforced concrete: A novel test technique.” Cem. Concr. Res., 26(1), 9–14.
Bissonnette, B., and Pigeon, M.(1995). “Tensile creep at early ages of ordinary, silica fume and fiber reinforced concretes.” Cem. Concr. Res., 25(5), 1075–1085.
Bloom, R., and Bentur, A.(1995). “Free and restrained shrinkage of normal and high-strength concretes.” ACI Mater. J., 92(2), 211–217.
Carlson, R. W., and Reading, J. J.(1988). “Model of studying shrinkage cracking in concrete building walls.” ACI Struct. J., 85(4), 395–404.
Decter, M. H., and Keeley, C.(1997). “Durable concrete repair—importance of compatibility and low shrinkage.” Constr. Build Mater., 11(5–6), 267–273.
Grzybowski, M., and Shah, S. P.(1990). “Shrinkage cracking of fiber reinforced concrete.” ACI Mater. J., 87(2), 138–148.
Ignatiev, N., and Chatterji, S.(1992). “On the mutual compatibility of mortar and concrete in composite members.” Cem. Concr. Compos., 14, 179–183.
Khajuria, A., and Balaguru, P. (1992). “Plastic shrinkage characteristics of fiber reinforced cement composites.” Fiber reinforced cement and concrete, R. N. Swamy, ed., E&FN Spon, London, 82–90.
Paillere, A. M., Buil, M., and Serrano, J. J.(1989). “Effect of fiber addition on the autogeneous shrinkage of silica fume concrete.” ACI Mater. J., 86(2), 139–144.
Pinelle, D. J.(1995). “Curing stresses in polymer-modified repair mortars.” Cem. Concr. Aggregates, 17(2), 195–200.
Rahman, M. K. (1999). “Simulation and assessment of concrete repair system.” PhD thesis, King Fahd Univ. of Petroleum & Minerals, Dhahran, Saudi Arabia.
Rahman, M. K., Baluch, M. H., and Al-Gadhib, A. H. (1997). “Modeling of concrete patch repair systems using finite element approach.” Proc., Saudi-French Workshop on Recent Developments in Material Processing and Modeling, King Fahd Univ. of Petroleum & Minerals, Dhahran, Saudi Arabia, 59–75.
Rahman, M. K., Baluch, M. H., and Al-Gadhib, A. H.(1999). “Modeling of shrinkage and creep stresses in concrete repair.” ACI Mater. J., 96(5), 542–550.
Shah, S. P., Weiss, W. J., and Yang, W.(1998). “Shrinkage cracking: Can it be prevented?” Concr. Int., 20(4), 51–55.
Wiegrink, K., Marinkunte, S., and Shah, S. P.(1996). “Shrinkage cracking of high strength concrete.” ACI Mater. J., 93(5), 409–415.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Jun 28, 1999
Accepted: Mar 27, 2001
Published online: Jul 15, 2002
Published in print: Aug 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.