Size Effect on Fatigue in Bending of Concrete
Publication: Journal of Materials in Civil Engineering
Volume 13, Issue 6
Abstract
This paper presents a semianalytical method to predict fatigue behavior in flexure of concrete in the case of maximum flexural moment larger than that of the first crack moment based on force equilibrium in the critical cracked section. The model relies on the cyclic bridging law, the so-called stress–crack-width relation under cyclic tensile load as the fundamental constitutive relationship in tension. The structural size effect on fatigue in bending of concrete beams is studied by the present model. Eight series of beams, with heights from 50 to 800 mm, are analyzed. The model results show that the fatigue performance in bending, normally expressed in terms of the maximum flexural stress versus fatigue life diagram (S-N) is strongly dependent on the structural size, even when the same material parameters are used in the model. Under the same cyclic flexural stress levels, the smaller the beam height, the longer the fatigue life is. Besides this, the deformation characteristics, such as fatigue crack growth history as well as the final fatigue crack length, are also size dependent. Finally, the model predictions are compared with experimental results. Good agreement between model predictions and experiments has been obtained.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bazant, Z. P. (1984). “Size effect in blunt fracture: Concrete, rock, metal.”J. Engrg. Mech., ASCE, 110(4), 518–535.
2.
Bazant, Z. P. ( 1987). “Fracture energy of heterogeneous materials and similitude.” Fracture of concrete and rock, S. P. Shah and S. E. Swartz, eds., Springer, New York, 229–241.
3.
Bazant, Z. P. ( 1992). “Size effect and brittleness of structures.” Fracture mechanics of concrete structures, Z. P. Bazant, ed., Elsevier Science, New York, 58–67.
4.
Bazant, Z. P., and Xu, K. ( 1991). “Size effect in fatigue fracture of concrete.” ACI Mat. J., 88(4), 390–399.
5.
Bazant, Z. P., and Schell, W. F. ( 1993). “Fatigue fracture of higher strength concrete and size effect.” ACI Mat. J., 90(5), 472–478.
6.
Gopalaratnam, V. S., and Shah, S. P. ( 1985). “Softening response of plain concrete in direct tension.” ACI J., 82(3), 310–323.
7.
Hillerborg, A., Modéer, M., and Petersson, P.-E. ( 1976). “Analysis of crack formation and crack growth by means of fracture mechanics and finite elements.” Cement and Concrete Res., 6, 773–782.
8.
Hordijk, D. A. ( 1992). “Tensile and tensile fatigue behaviour of concrete, experiments, modelling and analyses.” Heron, 37(1), 1–77.
9.
Hsu, T. T. C. ( 1981). “Fatigue of plain concrete.” ACI J., 78(4), 292–305.
10.
Kim, J., and Kim, Y. ( 1996). “Experimental study of the fatigue behavior of high strength concrete.” Cement and Concrete Res., 26(10), 1513–1523.
11.
Li, V. C., Lin, Z., and Matsumoto, T. ( 1998). “Influence of fiber bridging on structural size-effect.” Int. J. Solids and Struct., 35(31-32), 4223–4238.
12.
Maalej, M., and Li, V. C. (1994). “Flexural strength of fiber cementitious composites.”J. Mat. in Civ. Engrg., ASCE, 6(3), 390–406.
13.
Murdock, J. W., and Kesler, C. E. ( 1959). “Effect of range of stress on fatigue strength of plain concrete beams.” ACI J., 55(2), 221–232.
14.
Neville, A. M., and Brooks, J. J. ( 1987). Concrete technology, Longman Scientific & Technical, London.
15.
Otter, D. E., and Naaman, A. E. ( 1988). “Properties of steel fiber reinforced concrete under cyclic loading.” ACI Mat. J., 85(4), 254–261.
16.
Paris, P. C., and Erdogan, F. ( 1963). “A critical analysis of crack propagation laws.” J. Basic Engrg., 85, 528–534.
17.
Reinhardt, H. W., Cornelissen, A. W., and Hordijk, D. A. (1986). “Tensile tests and failure analysis of concrete.”J. Struct. Engrg., ASCE, 112(11), 2462–2477.
18.
Stang, H. ( 1992). “Evaluation of properties of cementitious materials.” Proc., Int. RILEM/ACI Workshop, High Performance Fiber Reinforced Cement Compos., H. W. Reinhardt and A. E. Naaman, eds., Chapman and Hall, London, 388–406.
19.
Stang, H., and Zhang, J. ( 1994). “Experimental determination of fatigue crack growth in fibre reinforced concrete.” Recent advances in experimental mechanics, J. F. Silva Gomez, ed., Balkema, Rotterdam, The Netherlands, 1347–1352.
20.
Tada, H. ( 1985). The stress analysis of cracks handbook, Paris Prod. Inc., Louis, Mo.
21.
Tepfers, R. ( 1979). “Tensile fatigue strength of plain concrete.” ACI J., 76(5), 919–993.
22.
Tepfers, R., and Kutti, T. ( 1979). “Fatigue strength of plain, ordinary and lightweight concrete.” ACI J., 76(8), 636–652.
23.
Ulfkjær, J. P., Krenk, S., and Brincker, R. (1995). “Analytical model for fictitious crack propagation in concrete beams.”J. Engrg. Mech., ASCE, 121(1), 7–15.
24.
Zhang, B., and Phillips, D. V. ( 1989). “Fatigue life of plain concrete under stress reversal.” Proc., Int. Conf. on Recent Devel. in Fracture of Concrete and Rock, S. P. Shah, S. E. Swartz, and B. Barr, eds., Elsevier Applied Science, London, 183–192.
25.
Zhang, J., and Stang, H. ( 1998a). “Fatigue performance in flexure of fiber reinforced concrete.” ACI Mat. J., 95(1), 58–67.
26.
Zhang, J., and Stang, H. ( 1998b). “Application of stress crack width relationship in predicting the flexural behavior of fiber reinforced concrete.” Cement and Concrete Res., 28(3), 439–452.
27.
Zhang, J., Stang, H., and Li, V. C. ( 1999). “Fatigue life prediction of fiber reinforced concrete under flexure load.” Int. J. Fatigue, 21(10), 1033–1049.
28.
Zhang, J., Stang, H., and Li, V. C. (2000). “Experimental study on crack bridging in FRC under uniaxial fatigue tension.”J. Mat. in Civ. Engrg., ASCE, 12(1), 66–73.
Information & Authors
Information
Published In
History
Received: Aug 30, 1999
Published online: Dec 1, 2001
Published in print: Dec 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.