Microstructural Development of Stabilized Fly Ash as Pavement Base Material
Publication: Journal of Materials in Civil Engineering
Volume 13, Issue 4
0899-1561(2001)13:4(316)/asset/6f8b3385-81d6-4ff7-9d9b-08c167f5bc1d/assets/(asce)0899-1561(2001)13:4(316).fp.png)
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ASTM. ( 1992). “Standard test method for compressive strength of molded soil-cement cylinders.” D-1633-84(90), standards on soil stabilization with admixtures, 2nd Ed., West Conshohocken, Pa.
2.
Behera, L. ( 1997). “Geotechnical properties and behavior of blast furnace slag-ash pond mixes.” MTech thesis, Indian Institute of Technology, Kharagpur, India.
3.
Ghosh, A. ( 1996). “Environmental and engineering characteristics of stabilized low lime fly ash.” PhD thesis, Indian Institute of Technology, Kharagpur, India.
4.
Ghosh, A., and Subbarao, C. (1998). “Hydraulic conductivity and leachate characteristics of stabilized fly ash.”J. Envir. Engrg., ASCE, 124(9), 812–820.
5.
Neville, A. M. ( 1991). Properties of concrete, 3rd Ed., 1981 (reprinted 1991), Longmans, Essex, U.K.
6.
Raymond, S. R., Burkes, J. P., and Marian, P. R. (1999). “Sulfate attack on cement stabilized sand.”J. Geotech. and Geoenvir. Engrg., 125(5), 364–372.
7.
Sutherland, H. B., Finlay, T. W., and Cram, I. A. ( 1968). “Engineering and related properties of pulverised fuel ash.” J. Inst. of Hwy. Engrg., 15(6), 19–27.
8.
Johnson-Clarke, J. R., and Smith, P. B. ( 1996). Performance of cement stabilized fly ash pavements—data collected during the Pacific Power Eraring ALF trial, ARRB Transport Research Ltd., Melbourne.
9.
Lav, A. H., and Kenny, P. J. ( 1997). “Leaching characteristics of Eraring (NSW) fly ash as road base material.” Road & Transp. Res., Melbourne, 6(1), 52–63.
10.
Lav, A. H., and Kenny, P. J. ( 1996a). “Utilisation of Eraring (NSW) Power Plant ash as pavement base material.” Proc., 7th Australia–New Zealand Conf. on Geomechanics, Adelaide, 655–660.
11.
Lav, A. H., and Kenny, P. J. ( 1996b). “The use of stabilized fly ash in pavements.” Proc., Nat. Symp. on the Use of Recycled Mat. in Engrg. Constr., Sydney, 77–81.
12.
Sutherland, H. B., Finlay, T. W., and Cram, I. A. ( 1968). “Engineering and related properties of pulverised fuel ash.” J. Inst. of Hwy. Engrg., 15(6), 19–27.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 13 • Issue 4 • August 2001
Pages: 316 - 317
History
Published online: Aug 1, 2001
Published in print: Aug 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.