Complete Triaxial Stress-Strain Curves of High-Strength Concrete
Publication: Journal of Materials in Civil Engineering
Volume 13, Issue 3
Abstract
The axial-stress–axial-strain and axial-stress–lateral-strain behavior of concrete under active lateral confinement is presented. The uniaxial strengths investigated are 41.9 MPa, 60.6 MPa, 73.1 MPa, and 103.3 MPa. The confining pressures (σ3) used are 4 MPa, 8 MPa, and 12 MPa. Details of an economical lateral-strain-measuring device used in this investigation to produce accurate and repeatable measurements are presented. For low levels of confinement, the constant in the Mohr-Coulomb failure criterion (k) is shown to be closer to five than the traditional value of four. The axial strain at peak stress is shown to have a strong linear relationship with the level of confinement. Parameter values are suggested for Ottosen's constitutive model based on nonlinear elasticity. It was discovered that descending portion of the nonlinearity index (β) versus the secant value of Poisson's ratio (νa) was independent of the uniaxial strength and the level of confinement. A simple model is proposed for the descending portion of the β versus νa curves.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ahmad, S. H., and Shah, S. P. ( 1982). “Stress-strain curves of concrete by spiral reinforcement.” ACI J., 79(46), 484–490.
2.
Ansari, F., and Li, Q. ( 1998). “High-strength concrete subjected to triaxial compression.” ACI Mat. J., 95(6), 747–755.
3.
Attard, M. M., and Setunge, S. ( 1996). “Stress-strain relationship of confined and unconfined concrete.” ACI Mat. J., 93(5), 432–442.
4.
Candappa, D. P., Sanjayan, J. G., and Setunge, S. ( 1996). “Behavior of high performance concrete under lateral confinement.” Proc., 21st Conf. on Our World in Concrete and Struct., CI-Premier, Singapore, 77–83.
5.
Candappa, D. P., Setunge, S., and Sanjayan, J. G. ( 1998). “Experimental stress-strain curves for high strength concrete under triaxial confinement.” Proc., Int. Conf. on High Perf. High Strength Concrete, Curtin University of Technology, Perth, Australia, 285–297.
6.
Candappa, D. P., Setunge, S., and Sanjayan, J. G. ( 1999). “Stress versus strain relationship of high strength concrete under lateral confinement.” Cement and Concrete Res., 29(12), 1977–1982.
7.
Chin, M. S., Mansur, M. A., and Wee, T. H. ( 1997). “Effects of shape, size, and casting direction of specimens on stress-strain curves of high-strength concrete.” ACI Mat. J., 94(3), 209–219.
8.
Dahl, K. K. B. ( 1992a). “A constitutive model for normal and high strength concrete.” Project 5, Rep. 5.7, American Concrete Institute, Detroit.
9.
Dahl, K. K. B. ( 1992b). “A failure criterion for normal and high strength concrete.” Project 5, Rep. 5.6, American Concrete Institute, Detroit.
10.
Imran, I., and Pantazopoulou, S. J. ( 1996). “Experimental study of plain concrete under triaxial stress.” ACI Mat. J., 93(6), 589–601.
11.
Ottosen, N. S. (1979). “Constitutive model for short-time loading of concrete.”J. Engrg. Mech. Div., ASCE, 105(2), 127–141.
12.
Smith, S. S., William, K. J., Gerstle, K. H., and Sture, S. ( 1989). “Concrete over the top, or: Is there life after peak?” ACI Mat. J., 86(5), 491–497.
13.
van Mier, J. G. M. ( 1986). “Fracture of concrete under complex stress.” HERON, 31(3), 1–90.
14.
Xie, J., Elwi, A. E., and MacGregor, J. G. ( 1995). “Mechanical properties of three high-strength concretes containing silica fume.” ACI Mat. J., 92(2), 135–145.
Information & Authors
Information
Published In
History
Received: Jul 13, 1999
Published online: Jun 1, 2001
Published in print: Jun 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.