Uniaxial Experiments on Idealized Asphalt Mixes
Publication: Journal of Materials in Civil Engineering
Volume 12, Issue 3
Abstract
This paper contains details of uniaxial compression experiments on various idealized asphalt mixes with volume fractions of aggregate ranging from 40 to 85%. The compression experiments are performed over a wide range of temperatures, stresses, and strain rates. The steady-state axial behavior of the mixes has the same form as that of bitumen with the aggregate acting as a stiffener. However, the mixes with high volume fractions of aggregate dilate under a uniaxial compressive stress. The experimental results are compared with theoretical predictions of a modified version of Hashin's composite sphere model. Good agreement is observed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Brown, S. F., et al. ( 1992). “Bituminous pavements. Materials, design and evaluation.” Residential course lecture notes, Dept. of Civ. Engrg., Univ. of Nottingham, Nottingham, U.K.
2.
Cheung, C. Y. ( 1995). “The mechanical behaviour of bitumens and bituminous mixes.” PhD thesis, Engrg. Dept., University of Cambridge, Cambridge, U.K.
3.
Cheung, C. Y., and Cebon, D. (1997). “Experimental study of pure bitumen in tension, compression and shear.” J. Rheology, 41(1), 45–73.
4.
Clayton, C. R. I., Khatrush, S. A., Bica, A. V. D., and Siddique, A. (1989). “The use of hall effect semiconductors in geotechnical instrumentation.” Geotech. Testing J., 12(1), 69–76.
5.
Davies, W. (1950). Foundry sand control, Lund Humphries & Co. Ltd., London.
6.
Deshpande, V. S. ( 1997). “Steady-state deformation behaviour of bituminous mixes.” PhD thesis, Engrg. Dept., University of Cambridge, Cambridge, U.K.
7.
Deshpande, V. S., and Cebon, D. (1999). “Models of particle reinforced nonlinear-viscous composite.”J. Engrg. Mech., ASCE, 125(3), 255–262.
8.
Finney, J. L. (1970). “Random packings and the structure of simple liquids. I: The geometry of random close packing.” Proc., Royal Soc., London, A319, 479–493.
9.
Fwa, T. F., Low, B. H., and Tan, S. A. (1993). “Compaction of asphalt mixtures for laboratory testing: Evaluation based on density profile.” J. Testing and Evaluation, 21(5), 414–421.
10.
German, R. M. (1989). Particle packing characteristics, Metal Powder Industries Federation, Princeton, N.J.
11.
Goetz, W. H., and Chen, C. C. ( 1950). “Vacuum triaxial technique applied to bituminous aggregate mixtures.” Proc., Assn. of Asphalt Paving Technologists, 19, 55–81.
12.
Harvey, J., Mills, T., Scheffy, C., and Monismith, C. L. (1994). “An evaluation of several techniques for measuring air-void content in asphalt specimens.” J. Testing and Evaluation, 22(5), 424–430.
13.
Hashin, Z. (1962). “The elastic moduli of heterogeneous materials.” J. Appl. Mech., 29, 143–150.
14.
Heukelom, W., and Herrin, M. ( 1964). “Road design and dynamic loading.” Proc., Assn. of Asphalt Paving Technologists, 33, 92–125.
15.
Hills, J. F. (1973). “The creep of asphalt mixes.” J. Inst. of Petr., 59(570), 247–262.
16.
Huang, Y. H. (1967). “Deformation and volume change characteristics of a sand-asphalt mixture under constant direct triaxial compressive stresses.” Hwy. Res. Rec. 178, 60–74.
17.
Lai, J. S., and Anderson, D. (1973). “Irrecoverable and recoverable nonlinear viscoelastic properties of asphalt concrete.” Hwy. Res. Rec. 468, 73–88.
18.
Monosmith, C. L., Alexander, R. L., and Secor, K. E. ( 1966). “Rheological behaviour of asphalt concrete.” Proc., Assn. of Asphalt Paving Technologists, 35, 400–450.
19.
Monosmith, C. L., and Secor, K. E. (1962). “Viscoelastic behaviour of asphalt concrete pavements.” Proc., 1st Int. Conf. on the Struct. Des. of Asphalt Pavements, Rd. Res. Lab., University of Michigan, Ann Arbor, Mich., 476–498.
20.
Nair, K., Smith, W. S., and Chang, C.-Y. (1972). “Applicability of a linear viscoelastic characterisation for asphalt concrete.” Proc., 3rd Int. Conf. on the Struct. Des. of Asphalt Pavements, Rd. Res. Lab., University of Michigan, Ann Arbor, Mich., 277–289.
21.
Nijboer, L. W. (1948). Plasticity as a factor in the design of dense bituminous road carpets, Elsevier Science, New York.
22.
Pagen, C. A. (1965). “Rheological response of bituminous concrete.” Hwy. Res. Rec. 67, 1–26.
23.
Pagen, C. A. ( 1968). “Size and thermological relationships of asphaltic concrete.” Proc., Assn. of Asphalt Paving Technologists, 37, 228.
24.
Rothenburg, L., Bogobowicz, A., Haas, R., Jung, F. W., and Kennepohl, G. (1992). “Micromechanical modelling of asphalt concrete in connection with pavement rutting problems.” Proc., 7th Int. Conf. on the Struct. Des. of Asphalt Pavements, Rd. Res. Lab., University of Michigan, Ann Arbor, Mich., 476–498.
25.
Rowe, G. M. ( 1993). “Performance of asphalt mixtures in the teapezoidal fatigue test.” Proc., Assn. of Asphalt Paving Technologists, 62, 344–350.
26.
Suquet, P. M. (1993). “Overall potentials and extremal surfaces of power law or ideally plastic composites.” J. Mech. Phys. Solids, 41(6), 981–1002.
27.
Tan, S. A., and Fwa, T. F. (1991). “Non-destructive density measurements of cylindrical specimens by gamma-ray attenuation.” J. Testing and Evaluation, 19(2), 155–160.
28.
Vakili, J. (1983). “An experimental study of asphalt concrete based on a multiple-integral representation of constitutive equations of a nonlinear viscoelastic solid.” J. Rheology, 27(3), 211–200.
29.
van der Poel, C. (1954). “A general system describing the visco-elastic properties of bitumens and it's relation to routine test data.” J. Appl. Chem., 4, 221–236.
30.
van der Poel, C. (1955). “Time and temperature effects on the deformation of asphaltic bitumens and bitumen-mineral mixtures.” Soc. of Petr. Engrs. J., 47–53.
31.
van der Poel, C. (1958). “On the rheology of concentrated suspensions.” Rheologica Acta, 1, 198–205.
32.
Wallace, K., and Monismith, C. L. ( 1980). “Diametral modulus on nonlinear pavement materials.” Proc., Assn. of Asphalt Paving Technologists, 49, 633–644.
33.
Ward, I. M. (1983). Mechanical properties of solid polymers, 2nd Ed., Wiley, New York.
Information & Authors
Information
Published In
History
Received: Oct 18, 1998
Published online: Aug 1, 2000
Published in print: Aug 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.