Ultrasonic Pulse Velocity Technique for Inspection and Evaluation of Timber
Publication: Journal of Materials in Civil Engineering
Volume 12, Issue 2
Abstract
The ultrasonic pulse velocity technique was used to assess the structural integrity of timber elements in monumental buildings. Six species of timber of different strength values were selected to establish the pulse velocity ranges. The effect of moisture content, specific gravity, internal voids, and external voids on the pulse velocity was measured from tests on different samples. The pulse velocity perpendicular to the grain was found to increase with increase in specific gravity or compressive strength parallel to the grain. A correlation between compressive strength parallel to the grain and ultrasonic pulse velocity perpendicular to the grain was established from test results on six species of timber. A condition-rating system was developed to estimate the strength and to assess the extent of deterioration or the reduction in strength in timber beams. Tests on laboratory samples and extensive field studies on large timber joists and beams of a nearly 140-year-old church building suggest that the recommended procedure can be used effectively for in-service assessment (nondestructively) of wood.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ashurust, J. N. ( 1988). “Practical building construction.” English heritage handbook, Vol. 5 (Wood), Gower Technical Press, U.K.
2.
Beall, F. C. (1987). “Fundamentals of acoustic emission and acoustic-ultrasonics.” Proc., 6th Non-destructive Testing of Wood Symp., Washington State University, Pullman, Wash., 3–28.
3.
Bodig, J., and Goodman, J. R. (1988). “NDE for performance of wood structures.” Proc., Int. Workshop on Non-destructive Evaluation for Perf. Evaluation of Civ. Struct., M. S. Agbabian and S. F. Masri, eds., University of Southern California, Los Angeles, 203–215.
4.
Brown, P. (1964). Indian architecture, Vol. 1, Taraporewala, Bombay.
5.
Degroot, R. C., and Esenther, G. R. ( 1982). “Insects, fungi, and other organisms that attack wood.” Wood structures, ASCE, New York, 126–135.
6.
Fiest, W. C. ( 1982). “Structural use of wood in adverse environments.” Wood, R. Mayer and W. Kellogg, eds., Van Nostrand Reinhold, New York, 156–178.
7.
Fiest, W. C. (1988). “Outdoor wood weathering and protection.” Proc., 196th Meeting of Am. Chem. Soc., Archeological wood: Properties, chemistry, and preservation, Adv. in Chem. Ser. 225, R. M. Rowell and J. R. Barbour, eds., Washington, D.C., 263–298.
8.
Freas, A. D. ( 1982). “Inspection.” Wood structures: A guide and commentary, ASCE, New York.
9.
Kemp, E. ( 1982). “Old wood structures.” Wood structures: A guide and commentary, ASCE, New York, 24–39.
10.
Kirk, T. K., Lamar, R. T., and Glaser, J. A. ( 1992). “The potential of white-rot fungi in bioremediation.” Biotechnology and environmental science molecular approaches, S. Mongkolsuk, P. S. Lowett, and J. E. Tempy, eds., Plenum, New York, 131–137.
11.
Lyon, D. E. ( 1982). “Degradation of wood in use and wood protection.” Wood as a structural material, Clark C. Heritage Memorial Ser. on Wood, Vol. II, Pennsylvania State University, University Park, Pa., 237–266.
12.
“Method of testing of small clear specimens of timber.” (1986). IS 1708 (Parts 1 to 18), Indian Standards Institute, New Delhi.
13.
Rajput, S. S., Shukla, N. K., Gupta, V. K., and Jain, J. D. (1991). Timber mechanics. India Council of Forestry Research and Education, Dehra Dun, India.
14.
Ross, R. J., and Pellerin, R. F. (1991). “Non-destructive testing for assessing wood members in structures.” General Tech. Rep. FPL-GTR-70, Forest Products Laboratory, Madison, Wisc.
15.
Sanyal, S. N., and Gulati, A. S. (1979). “Compressive strength of timber by ultrasonic pulse technique.” Indian Forester, 105(2), 180–185.
16.
Shaji, T. L. ( 1994). “Non-destructive evaluation and inspection of timber components in historic buildings.” M.Tech thesis, Civ. Engrg., Dept., IIT Madras, Chennai, India.
17.
Shaji, T. L., Mathews, M. S., and Somayaji, S. (1993). “Inspection and restoration of timber in historic buildings.” Congr. on Traditional Sci. and Technol. of India, Vol. of Abstracts, IIT Bombay, Bombay, 2–19.
18.
Walters, C. S. ( 1981). “The chemical treatment of wood for end use.” Wood: Its structures and properties, F. F. Wangaard, ed., Clark C. Heritage Memorial Ser. on Wood, Vol. 1, Pennsylvania State University, University Park, Pa., 272–320.
19.
Winandy, J. E., and Morrell, J. J. (1993). “Relationship between incipient decay strength and chemical composition of Douglas fir heartwood.” Wood and Fiber Sci., 25(3), 278–288.
20.
“Wood handbook.” (1987). Agric. Handbook No. 72, Forest Products Lab., U.S. Department of Agriculture, Washington, D.C.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 12 • Issue 2 • May 2000
Pages: 180 - 185
History
Received: Dec 5, 1994
Published online: May 1, 2000
Published in print: May 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.