Electrical Properties of Freshly Mixed Concrete
Publication: Journal of Materials in Civil Engineering
Volume 11, Issue 3
Abstract
The current procedures for the design of concrete mixes are based on specifying target workability and strength. Graphs are then used to determine the masses of constituent materials. Small changes in initial water content will result in the concrete mix not achieving its target, as water is necessary for the workability and hydration of cement, to produce cement paste that acts as the binder. Therefore, it is important to understand the distribution of water in fresh concrete to achieve the required workability, strength, and durability. This paper considers the use of electrical measurements to study the movement and special distribution of water within freshly mixed concrete. The technique is used to determine moisture content and rates of water absorption and adsorption of individual components forming the concrete. A theoretical model is developed, and simplified, using electrical formulas. The results from this investigation show that the cement paste is the primary governing factor in determining the electrical resistance of a fresh concrete. However it also shows that all constituents have some influence.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Blackledge, G. F. (1992). Concrete practice. British Cement Association, Berkshire, England.
2.
Calleja, J. (1952). “Effect of current on the measurement of electrical resistance in cement pastes.” J. Am. Concrete Inst., 49, 329–332.
3.
Chadda, L. R. (1955). “The rapid determination of cement content in concrete and mortar.” Indian Concrete J., Bombay, 29(8), 258–260.
4.
Hughes, B. P., Soleit, A. K., and Brierly, R. W. (1985). “New technique for determining the electrical resistivity of concrete.” Mag. of Concrete Res., 37(133), 243–248.
5.
Lakshminarayanan, V., Ramesh, P. S., and Rajagopalem, S. R. (1992). “A new technique for the measurement of the electrical resistivity of concrete.” Mag. of Concrete Res., 44(158), 47–52.
6.
McCarter, W. J., and Curran, P. N. (1984). “The electrical response characteristics of setting cement paste.” Mag. of Concrete Res., 36(126), 42–49.
7.
McCarter, W. J., Forde, M. C., and Whittington, H. W. (1981). “Resistivity characteristics of concrete.” J. Inst. of Civil Engineers, London, 71(2), 107–117.
8.
“Methods of testing cement: Determination of standard consistency.” (1995a). BS EN 196-3, British Standards Institution, London.
9.
“Methods of testing cement: Test for setting times.” (1995b). BS EN 196-3, British Standards Institution, London.
10.
Monfore, G. F. (1968). “The electrical resistivity of concrete.” J. Portland Cement Assoc. Res. and Devel. Lab., 2(10), 35–48.
11.
Neville, A. M. (1996). Properties of concrete, 4th Ed., Longman's, Essex, England.
12.
“Specification for aggregate from natural sources for concrete.” (1992). BS 882, British Standards Institution, London.
13.
“Testing concrete: Method for making test cubes from fresh concrete.” (1983a). Part 108, BS 1881, British Standards Institution, London.
14.
“Testing concrete: Method for determination of the compressive strength of concrete cubes.” (1983b). Part 116, BS 1881, British Standards Institution, London.
15.
“Testing aggregate: Sieve tests.” (1985). Part 103, Sect. 103.1, BS 812, British Standards Institution, London.
16.
“Testing aggregate: Method for determination of aggregate impact value.” (1990). Part 112, BS 812, British Standards Institution, London.
17.
“Testing aggregate: Methods for determination of density.” (1995). Part 2, BS 812, British Standards Institution, London.
18.
Teychenné, D. C., et al. (1992). Design of normal concrete mixes. Her Majesty's Stationery Office, Dept. of the Environment, London.
19.
Wilson, J. G., and Whittington, H. W. (1990). “Variations in the electrical properties of concrete with change in frequency.” Inst. of Electr. Engrs. Proc., U.K., 137(5), 246–254.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 11 • Issue 3 • August 1999
Pages: 242 - 248
History
Received: Apr 30, 1998
Published online: Aug 1, 1999
Published in print: Aug 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.