Prediction of Asphalt Rheological Properties Using HP-GPC
Publication: Journal of Materials in Civil Engineering
Volume 11, Issue 1
Abstract
Asphalt cement is a rheological material because its deformation characteristics vary not only with load but also with rate of load application. The chemical composition of asphalt cement affects its behavior. One of the methods that has been developed to study the molecular structure of materials is high pressure-gel permeation chromatography (HP-GPC). In this paper, the possibility of using the HP-GPC chromatograms to predict asphalt rheological properties is evaluated. Mathematical models are generated to predict the rheological properties of asphalt cement based on its molecular size. In the Gulf countries, there are currently four asphalt-producing refineries that include Ras Tanura and Riyadh refineries in Saudi Arabia, Al-Ahmadi refinery in Kuwait, and Bapco refinery in Bahrain. The asphalt produced by those refineries is referred to as “Arabian asphalt.” For this study to be comprehensive, it was decided to collect asphalt samples from all those refineries. Another set of polymer modified asphalt samples with 5, 10, and 15% crumb rubber and 3, 6, and 9% styrene-butadiene-styrene was included in this study to evaluate the effect of polymer modification on the molecular size distribution of the asphalt samples.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Al-Abdul Wahhab, H. I., Ali, M. F., Asi, I. M., and Al-Dubabe, I. A. ( 1996). “Adaptation of SHRP performance based specifications for Gulf countries.” Final Rep., King Abdul Aziz City for Science and Technology (KACST) Project, Riyadh, Saudi Arabia.
2.
“Background of SHRP asphalt binder test methods.” (1993). National Asphalt Training Ctr. Demonstration Proj. 101, Asphalt Institute Research Center, Federal Highway Administration Office of Technology Application, Washington, D.C., 1–79.
3.
Branthaver, J. F., et al. ( 1993). “Binder characterization and evaluation.” Chemistry, Vol. 2. Strategic Highway Research Program, National Research Council, Washington, D.C., 1–76.
4.
Breen, J. J., and Stephens, J. E. ( 1969). “The interrelationship between the glass transition temperature and molecular characteristics of asphalt.” Proc., AAPT, Vol. 38, 706–712.
5.
Brule, B., Raymond, G., and Such, C. ( 1986). “Relationship between composition, structure, and properties of road asphalts: State of research at the French public works central laboratory.” Transp. Res. Rec. 1096, Transportation Research Board, Washington, D.C., 22–34.
6.
Button, J. W., et al. ( 1983). “Influence of asphalt temperature susceptibility on pavement construction and performance.” NCHRP Rep. 268, Transportation Research Board, Washington, D.C.
7.
Bynom, D., and Traxler, R. N. ( 1970). “Gel permeation chromatography data on asphalts before and after service in pavements.” Proc., AAPT, Vol. 39, 683–702.
8.
Donaldson, G. R., Hlanlinka, M. W., Bullin, J. A., Glover, C. J., and Davison, R. R. ( 1988). “The use of toluene as a carrier solvent for gel permeation chromatography analyses of asphalt.” Liq. Chromat., 11, 749–765.
9.
Garrick, N. W. ( 1986). “Using high pressure-gel permeation chromatography to evaluate the chemical composition of blended asphalts,” PhD dissertation, Purdue University, West Lafayette, Ind., 6–77.
10.
Garrick, N. W. (1994). “Use of gel-permeation chromatography in predicting properties of asphalt.”J. Mat. in Civ. Engrg., ASCE, 6(3), 376–389.
11.
Garrick, N. W., and Wood, L. E. ( 1988). “Predicting asphalt properties from HP-GPC profiles.” Proc., AAPT, Vol. 57, 26–40.
12.
Glover, C. J., et al. ( 1988). “Chemical characterization of asphalt cement and performance-related properties.” Transp. Res. Record 1171, Transportation Research Board, Washington, D.C., 71–81.
13.
Hattingh, M. H. ( 1984). “The fractionation of asphalt.” Proc., AAPT, Vol. 53, 197–215.
14.
Jennings, P. W. ( 1982). “Uses of high pressure liquid chromatography to determine the effects of various additives and fillers on characteristics of asphalt.” Rep. FHWA/MT-82/001, Montana Department of Highways, Helena, Mont., 24.
15.
Jennings, P. W., Pribanic, J. A., Dawson, K. R., Smith, J. A., and Koontz, S. ( 1985). “Uses of high performance gel permeation chromatography for asphalt analysis.” Proc., 64th Annu. Meeting of the Transp. Res. Board, Washington, D.C.
16.
Jennings, P. W., and Pribanic, J. A. S. ( 1985). “The expanded Montana asphalt quality study using high pressure liquid chromatography.” Res. Rep. FHWA/MT-85/001, Montana Department of Highways, Helena, Mont.
17.
Jennings, P. W., Pribanic, J. A. S., Dawson, K. R., and Bricca, C. E. ( 1981). “Use of HPLC and NMR spectroscopy to characterize asphaltic materials.” Preprints, Div. of Petr. Chemistry, American Chemical Society, Vol. 26, 915–922.
18.
Jennings, P. W., Pribanic, J. A. S., Smith, J., and Mendes, T. M. ( 1988). “Predicting the performance of Montana test sections by physical and chemical testing.” Transp. Res. Rec. 1171, Transportation Research Board, Washington, D.C. 59–65.
19.
McLeod, N. W. ( 1989). “Relationship of paving asphalt temperature susceptibility as measured by PVN to paving asphalt specifications, asphalt paving mixture design and asphalt pavement performance.” Proc., AAPT, Vol. 58, 410–489.
20.
Monismith, C. L., Epps, J. S., and Finn, F. N. ( 1985). “Asphalt pavements mixtures: Design, construction and performance course notes.” Institute of Transportation Studies, University of California, Berkeley, 1–75.
21.
Noureldin, A. S. ( 1982). “Experimental and statistical evaluation and improvements of local 60/70 asphalt cement,” MS thesis, Facu. of Engrg., Cairo University, Cairo, Egypt, 191–197.
22.
Price, R. P., and Burati, J. L., Jr. ( 1990). “Predicting laboratory results for modified asphalts using HP-GPC.” Proc., AAPT, Vol. 59, 1–32.
23.
Puzinauskas, V. P. ( 1967). “Evaluation of properties of asphalt cements with emphasis on consistencies at low temperatures.” Proc., AAPT, Vol. 36, 489.
24.
Richman, W. B. ( 1967). “Molecular weight distribution of asphalts.” Proc., AAPT, Vol. 36, 106–113.
25.
Roberts, F. L., Kandhal, P. S., Brow, E. R., Lee, D.-Y., and Kennedy, T. W. ( 1991). “Hot mix asphalt materials, mixture design and construction, national centre for asphalt technology.” 21–62.
26.
Terrel, R. L., Epps, J. A., and Crawford, C. ( 1988). “Making the most of temperature/viscosity characteristics.” National Pavement Association Information Series 102/88.
27.
Zenewitz, J. A., and Tran, K. T. ( 1987). “A further statistical treatment of the expanded Montana asphalt quality study.” Public Roads, 51(3), 72–81.
Information & Authors
Information
Published In
History
Published online: Feb 1, 1999
Published in print: Feb 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.