Stress-Strain Relationship of High-Strength Fiber Concrete in Compression
Publication: Journal of Materials in Civil Engineering
Volume 11, Issue 1
Abstract
Tests conducted to characterize the stress-strain relationship of high-strength fiber concrete in compression using both cylindrical and prismatic specimens are reported. The concrete strength investigated ranges from 70 to 120 MPa. Other parameters include volume fraction of steel fibers and direction of casting in relation to the loading axis. Test results indicate that inclusion of fibers improves the strength and enhances the strain at peak stress but results in a smaller initial tangent modulus for specimens cast in an upright (vertical) position. Vertically cast prisms provide higher strains at peak stress and better postpeak ductility than cylindrical specimens. Based on the test data, an analytical model is proposed to generate the complete stress-strain σ-ε curves of high-strength fiber concrete derived from cylinders and horizontally cast prisms. The proposed model has been found to agree well with the stress-strain curves generated experimentally.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ACI Committee 544. ( 1982). “State-of-the-art report on fiber reinforced concrete.” Concrete Int.: Des. and Constr., American Concrete Institute, Detroit, 4(5), 9–29.
2.
Carreira, D. J., and Chu, K. H. ( 1985). “Stress-strain relationship for plain concrete in compression.” ACI J., 83(6), 797–804.
3.
Chin, M. S., Mansur, M. A., and Wee, T. H. ( 1997). “Effects of shape, size and casting direction of specimens on stress-strain curves of high-strength concrete.” ACI Mat. J., 94(3), 209–219.
4.
Ezeldin, A. S. ( 1989). “Bond and compression behaviour of normal and high-strength fiber-reinforced concrete subjected to generalized loading,” PhD thesis, Rutgers—The State University, New Brunswick, N.J., 355.
5.
Fanella, D. A., and Naaman, A. E. ( 1985). “Stress-strain properties of fiber-reinforced mortar in compression.” ACI J., 82(4), 475–483.
6.
Hsu, L. S. M., and Hsu, C. T. T. ( 1994). “Stress-strain behavior of steel fiber high-strength concrete under compression.” ACI Mat. J., 91(4), 448–457.
7.
Mansur, M. A., Wee, T. H., and Chin, M. S. ( 1994). “Some engineering properties of locally produced high-strength concrete.” Proc., 19th Conf. on Our Worlds in Concrete and Struct., Cl-Premier, 97–106.
8.
Mansur, M. A., Wee, T. H., and Chin, M. S. ( 1995). “Derivation of the complete stress-strain curves for concrete in compression.” Mag. of Concrete Res., 47(173), 285–290.
9.
Taerwe, L. R. ( 1991). “Influence of steel fibers on strain-softening of high-strength concrete.” ACI Mat. J., 88(6), 54–60.
10.
Tanigawa, Y., Hatanaka, S., and Mori, H. ( 1980). “Stress-strain behavior of steel fiber reinforced concrete under compression.” Trans. of the Japan Concrete Inst., Japan, 2, 187–194.
11.
Wafa, F. F., and Ashor, S. A. ( 1992). “Mechanical properties of high-strength fiber reinforced concrete.” ACI Mat. J., 89(5), 449–455.
12.
Wee, T. H., Chin, M. S., and Mansur, M. A. (1996). “Stress-strain relationship of high-strength concrete in compression.”J. Mat. in Civ. Engrg., ASCE, 8(2), 70–76.
Information & Authors
Information
Published In
History
Published online: Feb 1, 1999
Published in print: Feb 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.