Effect of Transition Zone on Elastic Stresses in Concrete Materials
Publication: Journal of Materials in Civil Engineering
Volume 10, Issue 4
Abstract
Concrete or mortar has three phases, namely, aggregate, bulk paste, and the transition zone. The transition zone is the weakest link in the composite system; its presence may considerably affect the overall elastic moduli and the stress distributions in a concrete material. The transition zone has a relatively more porous structure compared with that of bulk paste, and it may not be perfectly bonded to the aggregate. This paper proposes a four-phase composite model for investigating the elastic stress analysis of concrete materials. The analytical solutions of a four-phase composite model subjected to uniaxial compression are presented in two dimensions (2D) and three dimensions (3D). Modeling of imperfect shear interfacial bond in a four phase composite model is shown. The 3D and 2D uniaxial compression solutions are compared. The effect of an imperfect shear interfacial bond on the elastic moduli and stress solutions is illustrated. A parametric study is carried out to study the sensitivity of the stress distributions in the transition zone due to different aggregate types and due to changes in the elastic moduli of the transition zone. It is shown that the elastic moduli of the transition zone and its interfacial shear bond with the aggregate could considerably affect the overall elastic moduli and stress distributions in a cement composite.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Benveniste, Y.(1984). “On the effect of debonding on the overall behavior of composite materials.”Mech. of Mat., 3, 349–358.
2.
Benveniste, Y.(1985). “The effective mechanical behavior of composite materials with imperfect contact between the constituents.”Mech. of Mat., 4, 197–208.
3.
Chen, W. F., and Cohen, M. D. (1992). “Micromechanical considerations in concrete constitutive modeling.”Proc., 10th ASCE Struct. Congr., ASCE, Reston, Va., 270–273.
4.
Christinsen, R. M. (1979). Mechanics of composite materials. Wiley-InterScience, New York, N.Y.
5.
Christinsen, R. M., and Lo, K. H.(1979). “Solutions for effective shear properties in three phase sphere and cylinder models.”J. Mech. and Phys. of Solids, 27(4), 315–330.
6.
Cohen, M. D., Goldman, A., and Chen, W. F.(1994). “The role of silica fume in mortar: transition zone versus bulk paste modification.”Cement and Concrete Res., 24, 95–98.
7.
Cohen, M. D., Lee, T., and Goldman, A. (1995). “A method for estimating the dynamic moduli of cement paste-aggregate interfacial zones in mortar.” Microstructure of cement-based systems/bonding and interfaces in cementitious materials: Mat. Res. Symp. Proc., Materials Research Society, Warrendale, Pa., 407–412.
8.
Hashin, Z.(1991). “Spherical inclusion with an imperfect interface.”J. Appl. Mech., 29, 143–150.
9.
Hashin, Z., and Shtrikman, S.(1963). “A variational approach to the theory of the elastic behavior of multiphase materials.”J. Mech. and Phys. of Solids, 11, 127–140.
10.
Herve, E., and Zaoui, A.(1993). “n-layered inclusion-based micromechanical modelling.”Int. J. Engrg. Sci., 31(1), 1–10.
11.
Hirsch, T.(1962). “Modulus of elasticity of concrete affected by elastic moduli of cement paste matrix and aggregate.”ACI J., 59, 427–451.
12.
Lure, A. (1964). Three-dimensional problems of the theory of elasticity. Interscience Publishers, New York, N.Y.
13.
Ramesh, G., Chen, W. F., and Sotelino, E. D. (1996a). “Elastic stress analysis on micromechanical models of concrete materials.”Tech. Rep. CE-STR-96-9, Purdue University, West Lafayette, Ind.
14.
Ramesh, G., Sotelino, E. D., and Chen, W. F.(1996b). “Effect of transition zone on elastic moduli of concrete materials.”Cement and Concrete Res., 26(4), 611–622.
15.
Zhao, X. H., and Chen, W. F.(1996a). “The influence of interface layer on microstructural stresses in mortar.”Int. J. Numer. and Analytical Methods in Geomech., 20, 215–228.
16.
Zhao, X. H., and Chen, W. F.(1996b). “Stress analysis of a sand particle with interface in cement paste under uniaxial loading.”Int. J. Numer. and Analytical Methods in Geomech., 20, 275–285.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 10 • Issue 4 • November 1998
Pages: 275 - 282
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Nov 1, 1998
Published in print: Nov 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.