Absorption and Sorptivity of Cover Concrete
Publication: Journal of Materials in Civil Engineering
Volume 9, Issue 3
Abstract
The absorption characteristics and sorptivity of cover concrete obtained by the initial surface absorption test (ISAT), the covercrete absorption test (CAT), and the sorptivity test have been studied and compared. Two types of concrete, namely ordinary portland cement (OPC) control and low water concrete (LWC) of grade 35 have been tested. The laboratory work has shown close agreement between the ISAT and sorption results but the CAT yields higher results. An analytical model has been developed based on the mechanisms of capillary suction and pressure-driven flow. In this model water entering concrete during the tests is assumed to be concentrated in a well-defined volume. This volume is fully saturated and is separated from the surrounding concrete by a wetting front at which capillary suction occurs. By applying the physical equations for capillary suction pressures and permeability the experimental results are explained in terms of the basic properties of the concrete. The model gives good agreement with the experimental results.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Basheer, P. A. M., Montgomery, F. R., and Long, A. E. (1993). “The `autoclam permeability system' for measuring the in-situ permeation properties of concrete.”Conf. Proc., of British Inst. of Non-Destructive Testing, British Inst. for Non-Destructive Testing, Northampton, U.K., 235–259.
2.
British Standards Institute. (1970). “Methods of testing hardened concrete for other than strength.”BS 1881: Part 5, London, U.K.
3.
Bungey, J. H. (1989). The testing of concrete in structures. Surrey University Press, London, U.K., 137–161.
4.
Claisse, P. A. (1988). “Properties and performance of high strength silica fume concrete,” PhD thesis, Univ. of Leeds, U.K.
5.
Concrete Society. (1984). “Development in testing concrete for durability.”Proc., One-Day Symp., London, U.K., 59–64.
6.
Dhir, R. K., and Byars, E. A.(1991). “PFA concrete: near surface absorption property.”Mag. Concrete Res., London, U.K., 43(157), 219–232.
7.
Dhir, R. K., Hewlett, P. C., and Chan, Y. N.(1987). “Near surface characteristics of concrete: assessment and development of in-situ test methods.”Mag. Concrete Res., London, U.K., 39(141), 183–195.
8.
Hall, C.(1989). “Water sorptivity of mortars and concretes: a review.”Mag. Concrete Res., London, U.K., 41(147), 51–61.
9.
Illston, J. M. (1994). Construction materials, 2nd Ed., E & FN Spon, London, U.K., 171.
10.
Levitt, M. (1969). “Non-destructive testing of concrete by the initial surface absorption method.”Proc., Symp. on Non-Destructive Testing of Concrete and Timber, Inst. of Civ. Engrs., London, U.K., 23–36.
11.
Price, W. F., and Bamforth, P. B.(1993). “Initial surface absorption of concrete: examination of modified test apparatus for obtaining uniaxial absorption.”Mag. Concrete Res., London, U.K., 456(162), 17–24.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Aug 1, 1997
Published in print: Aug 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.