Recycling Plastics in Polymer Concrete for Construction Applications
Publication: Journal of Materials in Civil Engineering
Volume 5, Issue 2
Abstract
Recycled poly(ethylene terephthalate), or PET, is mainly recovered from plastic beverage bottles and can be used to produce unsaturated polyester resins. Polymer concrete (PC) made with these resins was investigated for their properties and behaviors at the University of Texas. Thermomechanical properties investigated include strength, Young's modulus, ductility index, Poisson's ratio, coefficient of thermal expansion, shrinkage, and exotherm. Durability properties include chemical resistance, water absorption, and sandblast resistance. Structural behavior of PC reinforced with steel bars and fibers includes load deflection and moment curvature. Overlay behavior includes the effect of thermal cycles on the tensile bond strength of thin PC overlays on portland cement concrete slabs. The properties of PC‐using resins based on recycled PET are comparable to those obtained from PC using virgin resins. Potential applications of such PC materials include precast components; repair of portland‐cement concrete; and bridge, wall, and floor overlays. Resins using recycled PET offer the possibility of a lower source cost of materials for making useful PC‐based products. Also, the recycling of PET in PC would help alleviate an environmental problem and save energy.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Al‐Negheimish, A. (1988). “Bond strength, long term performance, and temperature induced stresses in polymer concrete‐portland cement concrete composite members,” PhD thesis, The University of Texas, Austin, Tex.
2.
“Fragile foundations: A report on America's public works.” (1988). Final rep. to the president and congress, Nat. Council on Public Works Improvement, Washington, D.C.
3.
Kline, C. (1989). “Plastics recycling takes off in the USA.” Chem. & Industry, 4(July), 440–442.
4.
Letsch, R. (1984). “Zum Verformungsverhalten von Epoxidharzmoerteln bei stationaeren und instationaeren Temperaturen,” Proc., 4th International Congress on Polymers in Concrete, Institut für Spanende Technologie und Werkzeugmaschinen, Technischen Hochschule Darmstadt, Darmstadt, Germany, 231–235 (in German).
5.
“Market research on plastics recycling.” (1989). Technical report no. 31, N.J. Commission on Sci. and Technol. and Council for Solid Waste Solutions, Trenton, N.J.
6.
“Our neglected infrastructure.” (1989). Weekly Economic & Financial Commentary (Supplement), (May 19), Merrill Lynch, Princeton, N.J.
7.
Rebeiz, K. S., Iyer, V. S., Fowler, D. W., and Paul, D. R. (1990). “Polymer concrete using resins with recycled PET.” Proc., 48th Annual Tech. Conf., Soc. of Plastics Engrs., Brookfield, Conn., 1459–1461.
8.
Schneider, J. B., Ehrig, R. J., Brownell, G. L., and Kosmack, D. A. (1990). “Unsaturated polyesters containing recycled PET.” Proc., 48th Annual Tech. Conf., Soc. of Plastics Engrs., Brookfield, Conn., 1462–1465.
9.
Sprinkel, M. M. (1982). “Thermal compatibility of the polymer concrete overlays.” Transp. Res. Record No. 899, Highway Research Board, Washington, D.C., 64–73.
10.
Sprinkel, M. M. (1986). “Polymer concrete overlay on the Big Swan Creek bridge.” Rep. 37, Virginia Hwy. and Transp. Res. Council, Charlottesville, Va.
11.
“Test method for the tensile properties of plastics; ASTM D638.” (1988). Annual Book of ASTM Standards, ASTM, Philadelphia, Pa.
12.
Thayer, A. M. (1989). “Solid waste concerns spur plastic recycling efforts.” Chem. & Engrg. News, 67(5), 7–15.
13.
“Use of epoxy compounds with concrete.” (1979). ACI Committee 503 Report, Am. Concrete Inst., Detroit, Mich.
14.
Vaidya, U. R., and Nadkarni, V. M. (1987). “Unsaturated polyester resins from poly(ethylene terephthalate) waste.” Ind. & Engrg. Chem. Res., 26(2), 194–198.
15.
Yeon, K. S., Fowler, D. W., and Wheat, D. L. (1987). “Static flexural behavior of various polymer concrete beams.” Proc., 5th Int. Congress on Polymer Concrete, Brighton Polytechnic, Dept. of Civ. Engrg., Brighton, England, 85–89.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 5 • Issue 2 • May 1993
Pages: 237 - 248
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Apr 15, 1992
Published online: May 1, 1993
Published in print: May 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.