Protected‐Paste Volume of Air‐Entrained Cement Paste. Part 1
Publication: Journal of Materials in Civil Engineering
Volume 4, Issue 2
Abstract
Expressions for the protected‐paste volume of air‐entrained cement paste are derived using the hydraulic‐pressure mechanism of frost damage. The protected‐paste volume is the total common volume of cement paste protected from frost damage by all the air voids in the paste. The derived expressions are shown to reduce to known results for simple geometrical arrangements of air voids. The relative importance of air‐void parameters, material properties, and environmental parameters are deduced from the structure of the derived expressions. It is shown that material and environmental factors have at least as great an effect as air‐void parameters on the protected‐paste ratio. Though the expressions have been derived on the basis of the hydraulic‐pressure mechanism, it is suggested that the concept of protected‐paste volume as well as the form of the expressions may be applicable to other mechanisms of frost damage.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bogen, R. (1983). MACYSMA reference manual, 10th Ed., The MATHLAB Group, Laboratory for Computer Science, Cambridge, Mass.
2.
Dolch, W. (1984). “Air entraining admixtures.” Concrete admixtures handbook, V. Ramachandran, ed., Noyes Publications, Park Ridge, N.J., 291–293.
3.
Fagerlund, G. (1977a). “The critical degree of saturation method of assessing the freeze/thaw durability of concrete.” Mat. and Struct., 10(58), 217–229.
4.
Fagerlund, G. (1977b). “Equations for calculating the mean free distance between aggregate particles or air pores in concrete.” Research 8:77. Swedish Cement and Concrete Research Institute, Stockholm, Sweden.
5.
“Guide to durable concrete: ACI 201.2R‐77.” (1990). ACI manual of concrete practice: Part I. American Concrete Institute (ACI), Detroit, Mich.
6.
Larson, T., Cady, P., and Malloy, J. (1967). “The protected paste volume concept using new air‐void measurement and distribution techniques.” J. Mat., 2(1), 202–226.
7.
Litvan, G. G. (1973). “Frost action in cement paste.” Mat. and Struct., 6(34), 293–298.
8.
Litvan, G. G. (1988). “The mechanism of frost action in concrete—theory and practical implication.” Workshop on low temperature effects on concrete. National Research Council, Ottawa, Canada, 115–134.
9.
Philleo, R. E. (1983). “A method for analyzing void distribution in air‐entrained concrete.” Cement, Concrete, and Aggregates, 5(2), 128–130.
10.
Powers, T. C. (1945). “A working hypothesis for further studies of frost resistance of concrete.” Proc., ACI, American Concrete Institute, (ACI), Detroit Mich., 41, 245–272.
11.
Powers, T. C. (1949). “The air requirements of frost resistant concrete.” Proc., Highway Research Board, 29, 184–202.
12.
Powers, T. C., and Helmuth, R. A. (1953). “Theory of volume changes in hardened Portland cement paste during freezing.” Proc., Highway Research Board, 32, 285–297.
13.
Reid, W. D. (1955). “Distribution of sizes of sphere in a solid from a study of slices of the solid.” J. Mathematics and Physics, 34(2), 95–102.
14.
Roberts, L. R., and Scheiner, P. (1981). “Microprocessor based linear traverse apparatus for air‐void distribution analysis.” Proc., 3rd Int. Conf. on Cement Microscopy, International Cement Microscopy Association, Houston, Tex., 211–227.
15.
Standard mathematical tables. (1987). 28th Ed., W. H. Beyer, ed., CRC Press Inc., Boca Raton, Fla., 9.
16.
“Standard practice for concrete highway bridge deck construction. ACI 345‐82.” (1986). ACI manual of concrete practice: Part 2. American Concrete Institute (ACI), Detroit, Mich.
17.
“Standard practice for microscopical determination of air‐void content and parameters of the air‐void system in hardened concrete. C457‐82a, A.” (1990). Annual book of ASTM standards. ASTM, Philadelphia, Pa.
18.
Warriss, B. (1964). “The influence of air entrainment on the frost resistance of concrete.” Proc., Swedish Cement and Concrete Institute, Stockholm, Sweden, 36.
19.
Willis, T. F. (1949). “Discussion of ‘The air requirements of frost resistant concrete,’ by T. C. Powers.” Proc., Highway Research Board, 29, 203–211.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: May 1, 1992
Published in print: May 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.