Continuum Modeling of an Innovative Space-Based Radar Antenna Truss
Publication: Journal of Aerospace Engineering
Volume 19, Issue 4
Abstract
Many proposed inflatable designs for space applications consist of truss-like or lattice structures due to their simplicity of construction coupled with large stiffness to density ratios. An analytical approach is presented here in order to derive the governing partial differential equations of motion which are decoupled for bending and rotational coordinates of vibrations and applies this formulation to the truss structure model of an innovative space-based radar antenna. Kinetic and potential energy expressions are written in terms of nodal velocities and strain components of bar members within a repeating truss element. Hamilton’s principle is then employed to find the equations of motion for the system. The equations for bending are presented in their decoupled form in order to derive an equivalent Timoshenko beam model for the truss. Finally, the physical characteristics of the continuum model are written in terms of the material and geometrical properties of the original truss, which provide a simple tool for comparing dynamic characteristics of lattices with different properties. The natural frequencies are found for each of the bending coordinates of vibration and are compared to those of a standard finite-element method (FEM) solution, for the purpose of validation. The partial differential equations predictions of the natural frequencies for the truss are very close to the FEM. Finally the errors in the frequency estimations are found in terms of the wavelength of the traveling waves.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was conducted at the Center for Intelligent Materials Systems and Structures (CIMSS) at Virginia Polytechnic Institute and State University. This work was supported by the Defense Advanced Research Projects Agency (DARPA) through NASA-LaRc and the National Institute of Aerospace, for which we are grateful. The writers also acknowledge Pablo Tarazaga, Ph.D. candidate at CIMSS, Virginia Tech, for providing us with a figure of the 3D schematic of ISAT.DARPANASA
References
Burgart, B., and Cartraud, P. (1999). “Continuum modeling of beamlike lattice trusses using averaging method.” Comput. Struct., 73(1), 267–279.
Chmielewski, A. B. (2001). “Overview of gossamer structures.” Gossamer spacecraft: Membrane and inflatable structures technology for space applications, C. H. M. Jenkins, ed., Progress in Astronautics and Aeronautics Vol. 191, AIAA, Reston, Va., 2–3.
Dean, D. L., and Avent, R. R. (1975). “State of the art of discrete field analysis of space structures.” Proc., 2nd Int. Conf. on Space Structures, W. J. Supple, ed., Univ. of Surrey, Guildford, U.K., 7–16.
GangaRao, H. V. S., and Smith, J. C. (1972). “Dynamic field analysis of torsionless grids.” J. Engrg. Mech. Div., 98(3), 679–693.
Heki, K., and Saka, T. (1972). “Stress analysis of lattice plates as anisotropic continuum plates.” Proc., 1971 IASS Pacific Symposium Part II on Tension Structures and Space Frames, Tokyo and Kyoto, Japan, 663–674.
Inman, D. J. (2001). “Finite element method.” Engineering vibrations, 2nd Ed., Prentice-Hall, Upper Saddle River, N.J., 533–563.
Lake, M. S., and Kalng, E. C. (1992) “Generation and comparison of globally isotropic space-filling truss structures.” AIAA J., 30(5), 1416–1424.
Lee, U. (1993). “Dynamic continuum plate representations of large thin lattice structures.” AIAA J., 31(9), 1734–1736.
Lee, U. (1998). “Equivalent continuum representation of lattice beams: Spectral element approach.” Eng. Struct., 20(7), 587–592.
Nayfeh, A. H., and Hefzy, M. S. (1977). “Continuum modeling of three dimensions rod-like discrete structures.” Proc., Int. Symp. On Continuum Models of Discrete Systems, Univ. of Waterloo, Ont., Canada, 339–357.
Noor, A. K., et al. (1977). “Continuum models for static and dynamic analysis of repetitive lattices.” Proc., AIAA/ASME/SAE 18th Structures, Structural Dynamics and Materials Conf., San Diego, 299–310.
Noor, A. K., et al. (1978). “Continuum models for beam and plate-like lattice structures.” AIAA J., 16(12), 1219–1228.
Noor, A. K., and Russell, W. C. (1986). “Anisotropic continuum models for beamlike lattice trusses.” Comput. Methods Appl. Mech. Eng., 57(3), 257–277.
Singer, J. (2004). “ISAT program boosts space-based radar’s potential.” http:www.isrjournal.com/story.php?F=327970 (July 28, 2005).
Sun, C. T., and Kim, B. J. (1985). “Continuum modeling of periodic truss structures.” The Engineering Mechanics Division in conjunction with the ASCE Convention, N. Stubbs and D. Krajcinovic, eds., Detroit, 57–71.
Tollenaere, H., and Caillerie, D. (1989). “Continuous modeling of lattice structures by homogenization.” Adv. Eng. Software, 29(7-9), 699–705.
Wha, T. (1963). “Natural frequencies of uniform grillages.” J. Appl. Mech., 30(1), 571–578.
Wha, T. (1964). “Free lateral oscillations of a supported grillage.” J. Franklin Inst., 277(4), 349–360.
Information & Authors
Information
Published In
Journal of Aerospace Engineering
Volume 19 • Issue 4 • October 2006
Pages: 227 - 240
Copyright
© 2006 ASCE.
History
Received: Sep 1, 2005
Accepted: Apr 11, 2006
Published online: Oct 1, 2006
Published in print: Oct 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.