Implementation of an Associative Flow Rule Including Hydrostatic Stress Effects into the High Strain Rate Deformation Analysis of Polymer Matrix Composites
Publication: Journal of Aerospace Engineering
Volume 18, Issue 1
Abstract
A previously developed analytical formulation has been modified in order to more accurately account for the effects of hydrostatic stresses on the nonlinear, strain rate dependent deformation of polymer matrix composites. State variable constitutive equations originally developed for metals have been modified in order to model the nonlinear, strain rate dependent deformation of polymeric materials. To account for the effects of hydrostatic stresses, which are significant in polymers, the classical plasticity theory definitions of effective stress and effective inelastic strain, along with the equations used to compute the components of the inelastic strain rate tensor, are appropriately modified. To verify the revised formulation, the shear and tensile deformation of a representative polymer are computed across a wide range of strain rates. Results computed using the developed constitutive equations correlate well with experimental data. The polymer constitutive equations are implemented within a strength of materials based micromechanics method to predict the nonlinear, strain rate dependent deformation of polymer matrix composites. The composite mechanics are verified by analyzing the deformation of a representative polymer matrix composite for several fiber orientation angles across a variety of strain rates. The computed values compare well to experimentally obtained results.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aboudi, J. (1991). Mechanics of composite materials: a unified micromechanical approach, Elsevier, New York.
Bodner, S. R. (2002). Unified plasticity for engineering applications, Kluwer, New York.
Bordonaro, C. M. (1995). “Rate dependent mechanical behavior of high strength plastics: experiment and modeling.” PhD thesis, Rensselaer Polytechnic Institute, Troy, N.Y.
Chang, W. J., and Pan, J. (1997). “Effects of yield surface shape and round-off vertex on crack-tip fields for pressure-sensitive materials.” Int. J. Solids Struct., 34, 3291–3320.
Dowling, N. E. (1999). Mechanical behavior of materials: engineering methods for deformation, fracture, and fatigue, 2nd Ed., Prentice-Hall, Upper Saddle River, N.J.
Gates, T. S., Chen, J.-L., and Sun, C. T. (1996). “Micromechanical characterization of nonlinear behavior of advanced polymer matrix composites.” Composite materials: testing and design, Vol. 12, R. B. Deo and C. R. Saff, eds., ASTM, West Conshohocken, Pa., 295–319.
Gilat, A., Goldberg, R. K., and Roberts, G. D. (2002). “Experimental study of strain-rate-dependent behavior of carbon/epoxy composite.” Compos. Sci. Technol., 62, 1469–1476.
Goldberg, R. K. (2001). “Implementation of fiber substructuring into strain rate dependent micromechanics analysis of polymer matrix composites.” NASA/TM-2001-210822, National Aeronautics and Space Administration, Washington, D.C.
Goldberg, R. K., Roberts, G. D., and Gilat, A. (2003). “Incorporation of mean stress effects into the micromechanical analysis of the high strain rate response of polymer matrix composites.” Composites, Part B, 34, 151–165.
Greszcuk, L. B. (1971). “Interfiber stresses in filamentary composites.” AIAA J., 9, 1274–1280.
Hsu, S.-Y., Vogler, T. J., and Kyriakides, S. (1999). “Inelastic behavior of an AS4/PEEK composite under combined transverse compression and shear. Part II: Modeling.” Int. J. Plast., 15, 807–836.
Khan, A. S., and Huang, S. (1995). Continuum theory of plasticity, Wiley, New York.
Li, F. Z. and Pan, J. (1990). “Plane-stress crack-tip fields for pressure-sensitive dilatant materials.” J. Appl. Mech., 57, 40–49.
LS-DYNA keyword user’s manual, version 950. (1997). Livermore Software Technology, Livermore, Calif.
Mital, S. K., Murthy, P. L. N., and Chamis, C. C. (1995). “Micromechanics for ceramic matrix composites via fiber substructuring.” J. Compos. Mater., 29, 614–633.
Murthy, P. L. N., Ginty, C. A., and Sanfeliz, J. G. (1993). “Second generation integrated composite analyzer (ICAN) computer code.” NASA TP-3290, National Aeronautics and Space Administration, Washington, D.C.
Stouffer, D. C., and Dame, L. T. (1996). Inelastic deformation of metals: models, mechanical properties, and metallurgy, Wiley, New York.
Thiruppukuzhi, S. V., and Sun, C. T. (1998). “Testing and modeling high strain rate behavior of polymeric composites.” Composites, Part B, 29, 535–546.
Ward, I. M. (1983). Mechanical properties of solid polymers, Wiley, New York.
Weeks, C. A., and Sun, C. T. (1998). “Modeling non-linear rate-dependent behavior in fiber-reinforced composites.” Compos. Sci. Technol., 58, 603–611.
Whitney, J. M. (1993). “A laminate analogy for micromechanics.” Proc., American Society for Composites 8th Technical Conf., G. M. Newaz, ed., Technomic, Lancaster, Pa., 785–794.
Wineman, A. S., and Rajagopal, K. R. (2000). Mechanical response of polymers, Cambridge University Press, New York.
Information & Authors
Information
Published In
Copyright
© 2004 ASCE.
History
Received: Jun 4, 2003
Accepted: Jul 8, 2004
Published online: Jan 1, 2005
Published in print: Jan 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.