Adaptive Refinement/Recovery for Analysis of Wind around Structure
Publication: Journal of Aerospace Engineering
Volume 12, Issue 4
Abstract
For the efficient finite-element wind analysis, using the optimal mesh is one of the most important factors. The optimal mesh can be obtained when the errors of the solution are distributed uniformly over the entire domain. The study presents the development of a transition element for flow analysis, an element that has a variable number of midside nodes and can be effectively used in the adaptive mesh refinement by connecting the locally refined mesh to the existing coarse mesh through a minimum mesh modification. In the dynamic analysis of flow, the optimal mesh should be changed continuously in accordance with the changing error distribution; the proposed refinement/recovery scheme was found to be very effective for this purpose. The modified superconvergent patch recovery for the variable-node element is presented to estimate a posteriori error of the solution for the adaptive mesh refinement. The boundary conditions of the nodes generated by refinement process are different from those used in the ordinary finite-element method, in order to describe the singular point correctly. The numerical examples show that the optimal mesh for the finite-element analysis of flow around the structures can be obtained automatically by the proposed scheme.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Choi, C. K., and Lee, N. H. (1993). “A 3-D adaptive mesh refinement using variable-node solid elements with nonconforming modes.” Proc., 2nd Asian-Pacific Conf. on Computat. Mech., Sydney, Balkema, Rotterdam, The Netherlands.
2.
Choi, C. K., and Yu, W. J. (1997). “Variable node element for the adaptive FE analysis for incompressible viscous flow.” Proc., 7th Int. Conf. on Computing in Civ. and Build. Engrg., Techno-Press, Seoul, Korea.
3.
Choi, C. K., and Yu, W. J. (1998a). “Adaptive finite element wind analysis with mesh refinement and recovery.” Wind and Struct., 1, 111–125.
4.
Choi, C. K., and Yu, W. J. (1998b). “Numerical analysis of wind induced structural behavior.” Proc., Struct. Engrs. World Congr., San Francisco, Elsevier Science, New York, T171-4, 19–23.
5.
Choi, C. K., and Yu, W. J. (1998c). “Finite element techniques for wind engineering.” Proc., Int. Workshop on CFD for Wind Climates in Cities, Japan Association for Wind Engineering, Tokyo.
6.
Drake, R., and Manoranjan, V. S. (1996). “A method of dynamic mesh adaptation.” Int. J. Numer. Methods in Engrg., 39, 939–949.
7.
Gresho, P. M., et al. (1984). “A modified finite element method for solving the time-dependent, incompressible Navier-Stokes equations. Part 2: Applications.” Int. J. Numer. Method in Fluids, 4, 619–640.
8.
Huebner, K. H., Thornton, E. A., and Byron, T. G. (1996). The finite element method for engineers, 3rd Ed., Wiley, New York.
9.
Hughes, T. J. R., Liu, W. K., and Brooks, A. (1979). “Finite element analysis of incompressible viscous flows by the penalty function formulation.” J. Computat. Phys., 30, 1–60.
10.
Lee, C. K., and Lo, S. H. (1995). “An automatic adaptive refinement procedure using triangular and quadrilateral meshes.” Engrg. Fracture Mech., 50, 671–686.
11.
Lohner, R., and Baum, J. D. (1992). “Adaptive h-refinement on 3D unstructured grids for transient problems.” Int. J. Numer. Method in Fluids, 14, 1407–1419.
12.
Lopez, S. (1997). “Algorithmic aspects of adaptive multigrid finite element analysis.” Int. J. Numer. Method in Engrg., 40, 919–936.
13.
Morton, D. J. (1995). “A new 3D finite element for adaptive h-refinement in 1-irregular meshes.” Int. J. Numer. Method in Engrg., 38, 3989–4008.
14.
Oden, J. R., Kennon, S. R., Bass, J. M., and Berry, C. (1993). “Progress on adaptive hp-finite element methods for the incompressible Navier-Stokes equations.” Computat. Mech., 11, 421–432.
15.
Reddy, J. N. (1982). “On penalty function method in the finite element analysis of flow problems.” Int. J. Numer. Methods in Fluids, 2, 151–171.
16.
Sampaio, P. A. B., et al. (1993). “Petrov-Galerkin solutions of the incompressible Navier-Stokes equations in primitive variables with adaptive remeshing.” Comp. Method in Appl. Mech. and Engrg., 106, 143–178.
17.
Selman, A., and Hinton, E. (1993). “Two-dimensional transient dynamic analysis with adaptive mesh refinement.” Communications in Numer. Methods in Engrg., 9, 825–836.
18.
Stathopoulos, T. (1997). “A state-of-the-art report on computational wind engineering.” 7th Int. Conf. on Comp. in Civ. and Build. Engrg., Techno-Press, Seoul, Korea.
19.
Wang, K. C., and Carey, G. F. (1990). “Adaptive grids for coupled viscous flow and transport.” Comp. Methods in Appl. Mech. and Engrg., 82, 365–383.
20.
Wille, S. O. (1997). “Adaptive linearization and grid interactions with the tri-tree multigrid refinement-recoursement algorithm for the Navier-Stokes equations.” Int. J. Numer. Methods in Fluids, 24, 155–168.
21.
Yoshida, Y., and Nomura, T. (1985). “A transient solution method for the finite element incompressible Navier-Stokes equations.” Int. J. Numer. Methods in Fluids, 5, 873–890.
22.
Zienkiewicz, O. C., and Zhu, J. Z. (1987). “A simple error estimation and adaptive procedure for practical engineering analysis.” Int. J. Numer. Method for Engrg., 28, 879–891.
23.
Zienkiewicz, O. C., and Zhu, J. Z. (1994). “Automatic directional refinement in adaptive analysis of compressible flows.” Int. J. Numer. Methods in Engrg., 37, 2189–2210.
Information & Authors
Information
Published In
History
Received: Mar 11, 1999
Published online: Oct 1, 1999
Published in print: Oct 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.